My new 4s cannot send emails; emails are rejected by server. What are the correct settings?

What are the correct settings when my new 4s can receive but will not send messages. The emails are rejected by the server,

You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

Similar Messages

  • Since downloading new OS, cannot send email "server rejected"

    Since downloading new OS, cannot send email "server rejected"

    How do you know everything is correct? where did you get the instruction? Sometimes the default ports are different on different devices and thus you have to manually change the ports used.

  • Exchange 2010: New Mailboxes cannot receive external email, but internal works fine. Existing Mailboxes are working properly.

    Hello,
    I can't seem to figure out what the problem is, but my new mailboxes cannot receive external email. The sender receives an NDR stating the following:
    The error that the other server returned was: 550 550 No such user - psmtp (state 13).
    Internally, the affected mailboxes can send and receive mail, and the mailboxes have no trouble sending mail out of the organization. I do not see an anti-spam solution installed on the exchange server, and I have confirmed that DNS resolved to the WAN IP
    of this server. 
    Can anyone help me? The message tracker didn't appear to have recorded the NDR's that it sent, but it's possible I didn't view the logs correctly.
    Thank you!
    Paul
    My environment contains two servers:
    Server A: Domain Controller, Server 2008 R2, Exchange 2010 Standard
    Server B: Domain Controller, Server 2008 R2

    On Wed, 30 May 2012 02:01:19 +0000, Relion Support Inc wrote:
    >
    >
    >Hello,
    >
    >
    >
    >I can't seem to figure out what the problem is, but my new mailboxes cannot receive external email. The sender receives an NDR stating the following:
    >
    >The error that the other server returned was: 550 550 No such user - psmtp (state 13).
    >
    >
    >
    >Internally, the affected mailboxes can send and receive mail, and the mailboxes have no trouble sending mail out of the organization. I do not see an anti-spam solution installed on the exchange server, and I have confirmed that DNS resolved to the WAN
    IP of this server.
    >
    >
    >
    >Can anyone help me? The message tracker didn't appear to have recorded the NDR's that it sent, but it's possible I didn't view the logs correctly.
    Is your Exchange server exposed to the Internet or do you have some
    3rd-party device that does spam filtering? If you have something out
    in front of Exchange that only periodically refreshes its cache of
    valid SMTP addresses from the AD then you need to adjust the refresh
    rate.
    That "550 No such user" isn't a status code that Exchange returned.
    Rich Matheisen
    MCSE+I, Exchange MVP
    --- Rich Matheisen MCSE+I, Exchange MVP

  • Cannot send an email from my alias Mobile Me account from the iPhone.

    I have a Mobile Me email account which works perfectly on my Mac and iPhone. I created a an Alias Mobile Me Account on the web.
    I am able to create a new email from the alias account on the Mac.
    The iPhone will not recognize the alias account, I cannot add it or sync the account.
    I cannot send an email from my alias Mobile Me account from the iPhone.

    To all frustrated MobileMe alias owners who want to send email from iPhone - please go to the feedback area of the apple.com and leave messages regarding this issue. I had a lengthy conversation with a tech support guy who agreed that this is a needed fix - he said to initiate a grass roots effort - and that by all of us leaving messages it will eventually get attention and fixed. Why would Apple give us the ability to create alias's, use them on mobileme website, on our mac mail programs, but NOT the iPhone, which is the MOBILE device. Silly. Please protest!! Thanks.

  • I cannot send an email from my iphone

    I have entered all of the information for my in-coming and outgoing server into my iphone 4s.  However, I cannot send an email  and the message reads as follows "The sender address XX.net was rejected by the server.

    Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name.  Make sure the settings there are correct.

  • CANNOT SEND ANY EMAILS!!!!

    Hi,
    I finally downloaded the desktop manager last week and backed up my berry (after a year!). At the same time it updated my system to a newer version. Since then, my battery life is greatly diminished (one day only) and I cannot send ANY emails. I can send text messages, but not emails. I select "send" and the email just sits there. I also can't select "save draft". I can only select "delete", but then it warns me that I haven't saved (which is so annyoing, since I can't save!!) Help!!!!!

    Do a simple reboot on the BlackBerry in this manner:
    With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
    Now try sending an email again. If still no lunck:
    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Since upgraded phone to 2.0, cannot send out email

    I recently upgraded my iphone to 2.0 (mistake!) and now cannot send out email from my iphone. I have tried deleting all my email accounts and re-setting it up on my iphone rather than syncing with my computer but it still will not send out email. I can send out email from my computer and used the same settings for both...

    Also having mixed success sending mail on the iPhone, which is disappointing because I haven't had to send a lot of messages. Out of about 6 attempts, I've had two replies completely disappear. They weren't sent, they weren't in the outbox to send later. They just disappeared. One was while on my home network, the other was while I was traveling. I am very bothered that the emails aren't saved to try and send later.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • I cannot send Yahoo eMail from iPad or iPhone, but I can receive

    I cannot send Yahoo eMail from iPad or iPhone, but I can receive.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

    I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

    Open the file in Preview and select "Save as..." from the File menu. Select "Reduce File Size" from the Quartz Filter menu and save. The size probably won't be reduced enough, though. You may have to split the file into several parts and mail them separately. Or upload it to a web server and send the link.

  • Cannot send / receive emails

    I have recently upgraded to ML on both my iMac and Macbook Pro. Although they were both fine before, I now find that I cannot send or receive emails on the iMac. I can receive but not send on my Macbook.
    I also have a PC, on which I can both send and receive, so it is not the server. All my settings seem to be OK. I appreciate that this has been discussed in previous posts, but I am at a loss as to why one machine half works but the other does not. Any ideas would be very much appreciated.

    The upgrade to Mountain Lion in this case may have caused the Mail app to lose all of its Incoming Mail Server and Outgoing Mail Server (SMTP) settings in Mail>Preferences>Accounts.  This happened to me and others in this Forum.  You would need to contact your ISP to obtain the correct settings for these two servers and re-enter them in the above location.  I know, Apple slipped a bit on this one.
    Hope this helps

  • Cannot send / receive emails. Information and settings both the same on phone and computer.

    iPhone stopped receiving/sending emails yesterday.  Information/settings the same on computer and phone. Phone says it 'Cannot Get Mail the user name or password is incorrect'.

    The upgrade to Mountain Lion in this case may have caused the Mail app to lose all of its Incoming Mail Server and Outgoing Mail Server (SMTP) settings in Mail>Preferences>Accounts.  This happened to me and others in this Forum.  You would need to contact your ISP to obtain the correct settings for these two servers and re-enter them in the above location.  I know, Apple slipped a bit on this one.
    Hope this helps

  • TS3276 I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I had this problem too but I fixed it today.
    Go to the mail menu preferences.
    Click on account in question.
    Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
    Click on the advanced button.
    Make sure use default port is checked.
    Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
    Have authentication set to password.
    User name should be your email address for that account.
    Make sure correct password is entered (for some strange reason my password box was blank on this account).
    Push the ok button.
    For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
    I hope this helps.
    Here is a link to some visual aids with the steps from my ISP
    http://support.knology.net/content/smtpauth/smtpredirect.cfm

  • Hello can some body help me on my icloud app.i cannot send an email with iCloud

    Hello
    can some body help me on my icloud app.i cannot send an email with iCloud
    excuse me my english

    Hello
    thanks for your prompt response
    yes i defined an account for icloud
    Regards
    Faisal Djama

Maybe you are looking for

  • Why is it photoshop CS4 worked flawlessly with my fonts in Snow Leopard, but are making CS6 crash in

    I transferred all of the fonts starting with 'A' into font book and all of them had either a yellow or red dot next to them. They all worked fine in photoshop CS4. What gives? Will Adobe fix this and make them compatable? I have a fortune invested in

  • Webutil_c_api

    I have problem trying to run the webutil demo wu_test.fmb (downloaded from otn.oracle.com). I had gone through the WebUtil Familiarization Manual step by step and (hopefully) properly set up WebUtil per instructions. When I ran the demo form (wu_test

  • Similar to "Iphone does not appear in Itunes!!" but on a mac

    (This is different from what I posted under the other topic.) Hi. I am all Mac and cannot get either my iPhone nor my iPod Touch 2nd Gen to be recognized by iTunes. I know this is iPhone section but I feel bother are suffering from the same problem.

  • EXE not writing to TDMS files

    Hi folks, I am using LabView 8.20 on a Windows XP machine.  The application generates TDMS data files and all works fine in the development environment.  When I compile the TDMS files are not written to correctly.  The files are created (I can see th

  • BAPI or FM to change an inspection Plan

    Hi everyone, I have a requirment,when a specification (Recipe managment) is changed ,the data accordingly should be updated in the inspection plan that is linked with that. Can you pelase let me if i have any function module or BAPI which can be used