My new 4S is set to slide to unlock and I don't know how to answer a call.

I don't knpw how the configuration changed but it switched from slide to answer to slide to unlock.
I don't know how to answer a call and want to get the configuration back to skide to answer.
How do I do that?

I should have been clearer, if I receive a call from someone who is not in my address book, I cannot answer the call because the phone remains in "Slide to Unlock" and is not in "Slide to Answer."

Similar Messages

  • The hard driven on my new macbook pro is divided into two sections and I don't know how to access the second half.

    Under "about this mac" and "system report" my hard drive is described as 750gb with 4 sub categories 1-Macintosh HD 2-recovery hd 3-untitled 4-recovery hd.  I have almost filled the macintosh hd and am getting low memory warnings.  How do I access the second half of my hard drive?
    Thanks,
    Nate

    I think I figured it out.  Of course as soon as I post something I figure it out.  Anyway, I went into disk utility and could see "untitled" but it was greyed out and not accessible.  I then clicked the "mount" button and now the disk is available in finder.  I'm not sure how it got unmounted but I am able to write to it and access it so I guess the problem is solved.

  • CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

    CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

    Hi Kglad.
    I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
    Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
    here is the new tutorial for CC -  my guess is they have scrapped the control we had over the custom crop settings
    Cropping Images In Adobe Camera Raw 8

  • I have just got the new iPod touch. Everything is working except my iMessage and I don't know how I can set it up.

    I have just got the new iPod touch. Everything is working except my iMessage and I don't know how I can set it up.

    Illaass
    Gave my grandsons iPods for Xmas. Looks like one of them downloaded an app (text+) and must/may have deleated on hisiPod the iMessage app that was included on both with both iPods.
    I want to ditch this new app (text+) and return iMessage to his phone as they both are wifi only and iMessaget is what they should both use. Ialso have a iPad (wifi only) and a iphone (both on iOS5) and a MacBook on 10.7.2
    Any help as to how to do this (I would prefer not to due a full restore to the affected iPod if possible)

  • I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
    Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
    Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Be sure you have prepared the new drive correctly:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB

    I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB

    Connect your USB mic or USB Audio Interface to an USB port.
    Create an new Audio Track from the Tracks menu > New Track.
    Select "Audio > Record using a microphone ...."
    Click "Details" to reveal the Input sources.
    Click "My instrument is connected with..." to open the GarageBand Preferences "Audio" tab and select your microphone as Input device.
    In the Track menu > Track Header enable "Show Record enable" button.
    Enable this button for your vocal track.
    Open the Library pane to select a vocal patch your new track.

  • I bought a new iPod 5 generation and I have music on my old iPod 4 generation and I don't know how to get that music off. Because I don't have the CDs anymore to get them on my new iPod.

    I bought a new iPod 5 generation. And I have music on my old iPod 4 generation and I don't know how to transfer music from my old iPod to my new. And I don't have the CDs anymore to transfer the music.

    Emmiroo wrote:
    And I don't have the CDs anymore to transfer the music.
    You need to have those as they are the license to use the music you RIP'd from them.

  • I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

    I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
    I JUST NEED HELP

    I would contact Apple under your warranty.  I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod. 

  • Probably stupid question but I am new to Mac's.  Somehow my picture is at the right top of my out going emails and I don't know how to delete it.  Help!!

    Probably astupid question but I am new to Mac's.  Somehow my picture is gotten placed at the top right of all my out going mail and I don't know how to delete it.  Help!!

    This may help:
    http://www.maclife.com/article/how_can_i_remove_my_photo_from_messages_in_apple_ mail

  • HT201699 I don't have an APN in my mini ipad, and I don't know how to set a personal hotspot

    I don't have an APN in my mini ipad, and I don't know how to set a personal hotspot

    Non Retina display, first gen. iPad Minis DO NOT have personal hotspot feature. This feature started with Retina Display iPad Minis.

  • I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)

  • Why does my Imac screen slide and I lose my screen?  It goes back to my desktop.  Then sometimes my screen goes to full screen and I don't know how to get out of it.

    Why does my Imac screen slide and I lose my screen ~ It goes back to my desktop.
    Then sometimes my screen goes to full screen without me doing any commands, and I don't know how to get out of it without going to force quit and starting all over. 

    Hi,
    When it goes full screen try moving the mouse up to top right of scren & see if there a double diagonal Arrow to click on.
    On the other see if it's the silly implentation of Spaces/Mission Control/Expose in ML...
    https://discussions.apple.com/thread/4298411?start=0&tstart=0

  • Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!

    Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!

    Settings > Store > Sign Out.
    Sign in with the correct ID.

  • Since updating to iOS6, im on giff gaff and I don't know how to set up the VPN to get 3G to work?

    Since updating to iOS6, im on giff gaff and I don't know how to set up the VPN to get 3G to work?

    oh sorry, well since i have updated to iOS6 i turn on my 3G, then try to connect to the internet with 3G and it says ''Could not activate mobile data network'' then underneath that says ''You are not subscribed to a mobile data service'' would you be able to help?

Maybe you are looking for

  • Parsing Failed for Date in Prompt

    Hi Folks, I am having Parsing Issue on "Key Date"  Object in Universe. See the Error and Code below for your review Error: Parse Failed: Exception: DBD, The value entered is not valid. It must adhere to one of the following formats.           YYYYMMD

  • I need help from muse pro's

    I have a client wanting a site similar to this link. http://www.charliegerken.com/ I can do most everything layout and content wise but where I need help is with the complex searches and the integrated maps. Any input would be very much appreciated.

  • Communication problems BW-BPC

    Hi. We'va a communication problems in our BW-BPC system, it seems more a basis issue than a BPC configuration problem, but itu2019s the only component affected. Version details: SAP BPC 7.5 NW installed in:    - SAP Netweaver 7.01    - Windows Server

  • Autofill inserts information not in my address card

    When I try to enter 3 digits of my Canadian postal code which is T3L, autofill shows the full postal code, but when I tab out of the postal code field, Safari replaces the postal code with 3-0. I have had this happen before. How can I stop this incor

  • How to test ImageServlet on JDev 10.1.3 (OCJ4) ?

    Hello, I download StoreFront.zip OTN sample and modify Imageservlet class to read blob data into an image object on my jspx. I place a breakpoint in ImageServlet's source, and run my test with debug mode. The jspx is displayed but the ImageServlet is