My new 6 is showing LTE connection while my wife's 6 shows 4G... WHY?
My new 6+ is showing LTE connection while my wife's 6+ shows 4G... WHY?
all settings seem to be the same....
One of three questions answered. In order to help, we need to go through a troubleshooting process.
Have you talked to At&t about the difference?
Have you reset the network settings?
Have you talked to Apple about the issue?
Similar Messages
-
Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.
Hi there ricalimo,
I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W. -
I just got a new iPhone but I cannot connect to my WiFi
My new iPhone will not connect with my WiFi. My WiFi is up and running. What do I do?
Hello, After updating iOS 8 to 8.0.2 on my iPad mini , some of the application crashes and while browsing from safari its very slow and its shows page not found and Safari not responding also. I reset network settings from iPad, no luck. Any one facing same issue?
-
Brand new iPod touch will not connect to home wifi
Monday I got a brand new iPod 4 to replace my previous one, as the home button had failed unexpectedly. The new iPod is working fine, running the latest iOS but when I try to connect our secure home wifi, it won't accept the password. We have reset the password and I've reset network settings. I'm so frustrated, because everything else connects to the wifi BUT my iPod will not take our correct password. What can I do? Should I take it back to Apple? I'm already annoyed by having to get a new iPod. The last one connected just fine but now this one won't.
Does the iPod connect to other networks?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings. done
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Please help new iphone 4s from verizon will not connect to my home wifi. I was able to connect to my sister's home wifi without any issues tonight, but now at my home and says password is incorrect. The password is correct. I have an ipod touch gen 2 that connects with no problems.
make sure your home wireless network is not "hidden." Settings -> Wi-Fi -> select your home network, it it's hidden, select "other" and manually type in the network name, password, and select security type.
-
My new i phone 5s is overheating while playing games and working heavy apps,why it is
my new i phone 5s is over heating while playing games and also using heavy apps ,what shoud i do now ?
If you think it is getting too hot then take it to an Apple store and have it examined, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Can someone tell me how to keep my ipad signed in to my sifi?
This is the iphone forum
You should post in the ipad forum -
New iPad Air will not connect to wifi?
New iPad Air will not connect to home wifi, but will connect to others outside my home?
Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
HT204400 Apple TV unable to connect to the WiFi Router solution.
Having found my new Apple TV unable to connect to my WiFi Router I discovered a technique which may be useful to others. Use your mobile phone as a mobile hotspot instead. I hope this helps other people with a similar connectivity issue.
Hi, i do have a similar situation. Everytime I try to synchronise itunes with my ATV (also version 2.3), it synchronise between 4 and 10 songs and then automatically disconnect the wireless connection on my computer (my ibook and other notebook stays connected at the same time). regards, Erik
-
SInce I downloaded the new iOS6 update on my ipad2, it will not stay connected to my wifi. Does anyone know why or how to fix it?
Hm, posting on this forum didn't fix it for me.
-
We have upgraded some phones at our house, and one new phone will not auto connect to the wifi at our house. Only this phone all three other ones will do the auto connect. we have tried to reset network and phone settings but alas still this phone wont auto connect at home
Just got off the phone with support. I had previously reset network settings and did a hard reset with home button and top button. support told me to reset all settings and that seemed t have worked
-
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Problem while connecting with Wi-Fi,
When i am connecting my powerbook g4 leopard to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
One last thing to try before going with another Wi-Fi solutions is to the following:
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
3. Run the Disk Utility to repair Disk Permissions.
Restart or log out then back in.
4. Turn off the Mac OS X Firewall
System Preferences > Sharing > Firewall
Click the "Stop" button.
5. Create a New User Account
System Preferences > Accounts
Click "+" to add a new account
Log off, then log back on with the new user account.
Try connecting with the AirPort.
If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC). -
My wife has just had a new iPad and while the Wifi works fine at home, at work she is unable to connect after entering the correct password etc. The 'waiting wheel' simply spins next to the network attempting to connect. The iPad version is 5.1.1 and not the IOS 6 which seems to be problematic on the Wifi front. To add to the mystery my own iPad connects fine to my wife's place of work. Is it possible to take the manual settings from mine and connect that way? Or any other suggestions?
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
Maybe you are looking for
-
How do you save edits to bookmarks in Adobe 10?
After editing the bookmarks in a PDF file when the file is saved it appears that the bookmarks revert back to the original text. Is there a specific way to save these bookmark changes? Do you need to perform a Save As to capture the bookmark change
-
Check to see if compositing is enabled?
I've got it enabled in xorg.conf but I don't know if it is ACTUALLY enabled. Is there a terminal command to see if compositing is working?
-
Material Management/ Classification System
Hello When I look materials by class and I display the materials but when I want to select two or more materials for copy, I get the following message: Message no. CL479 This application can only copy one object from the search result. Select one obj
-
Single cycle plan with counter in plant maintenance
Dear Experts, I am creating single cycle plant with performance based with couter reading. 1 I have crated a measuring point with counter in running hrs 2 Created a single cycle plan and given the couter no. there 3 Since i hv given 4000 hrs in plan,
-
Hello I have created the following type in Oracle 8i... create or replace type cno as varray(5) of number; and used it in a table as... create table sum_of(name varchar2(30),get_no cno); How can i use it in Forms 6i? Regards Laila