My new 7D gets very dark pics indoors when using "automatic" settings. Whats wrong?

My new Canon 7D gets very dark pics indoors when everything is set on "Automatic". So did my 60D, which i traded in for the 7D because of disappointing dark pics when on "Automatic". This happens with the built-in flash, and also with my 430EX II external flash.
What am I doing wrong? I would like to make it work properly on "Automatic".
Thanks,
Art

moxfulder wrote:
Thanks for your responses! I'm not using a flash. The lighting is sufficient for even my iPhone4 to capture images with no flash, but the 6D's images are dark.
Oh, sorry, I misunderstood. That must be your exposure compensation. Is it centered?

Similar Messages

Almost every time my daughter FaceTimes me, another person answers and he is getting very annoyed. I have checked my settings and can't figure out why this is happening.

Almost every time my daughter FaceTimes me, another person answers and he is getting very annoyed. I have checked my settings and can't figure out why this is happening.

Is she facetiming your phone number or email address, b/c email address should not do that.. Was there an old iPhone associated with your number or email? I've seen texts show up on long "deactivated" devices..

Thin flickering white line at the very top of screen when using mail

using an imac 27 inch, new...
there is a thin flickering white line at the very top of screen when using mail.
usually when sending a mail or when the cursor moves over a link ( in apple mail )
the flickering line is just under the very top menu bar which has the date on etc...
anyone else had this or know how to fix it?
cheers

I am facing the same problem. In fact mac book pro 13 retina was in the 14 day period so I got it retuned today, after directions from the apple telephone support. However, the new machine I got in exchange has the same problem or flickering line under the menu tab.
The only relief it seems is the fact that it's not a hardware problem probably. I also think so because if I do a full screen which essentially means there is no menu bar, then there is no flickering white line.
Hope apple fixes this. Sad to notice this drop in apple quality, and yet not fixed.

When I double click run installation, then proceed to restart, I restart the computer, but when it loads back up, I get an error message, saying I need to restart, whats wrong?

When I double click run installation, then proceed to restart, I restart the computer, but when it loads back up, I get an error message, saying I need to restart, whats wrong?

I get an error message, saying I need to restart, whats wrong?
That is a "kernel panic".
Try here. Resolving Kernel Panics

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

How do i get passed the billing step when using my apple id to download apps

how do i get passed the billing step when using my apple id to download apps on my ipod touch

DId you enter a valid payment method?

MacBook screen randomly gets very dark

My MacBook is from 2007, so it is old and has its problems. I am currently in college and use my iPad primarily for school work. Thank God I got this iPad a few weeks ago because I did not know my computer would have such a huge problem! When I turned it on one day, it was all normal, and randomly the screen got so dark, it looked like the computer had shut down on me. I knew it was still turned on though because the little light was indicating that it was on and it was still making the cd drive/booting up sounds. After a while, I noticed that the screen just went very very dim, because I could still slightly see the webpage I was on. Turning up the brightness of the screen did nothing to help, same with restarting the computer. Sometimes the screen would come back to the normal brightness, until I would go to do something on the internet and it would go very dark again. It's so unpredictable, I don't even want to deal with it anymore. But there are some things for school I just need my laptop for rather than my iPad and I really need some help trying to fix it!! I seriously cannot afford to buy a new MacBook right now, so I need to get this dim screen fixed so this computer can last me the rest of the semester.

It sounds like screen is failing. There is no fix if this is the problem.
Try Resetting the SMC
http://support.apple.com/kb/HT3964
There are special deals for students. You can get a MacBook Air starting around $750.
If you do purchase a new computer, get 8GB RAM. RAM is soldered in and you can't upgrade later.
Check out Apple's Special Financing link.
http://store.apple.com/us/browse/finance/instant_credit

Cannot get hardware limits to work when using Lintech switches with a ACR9000 motion controller

This has been my conversation with Parker Automation.
From: Susan Connors <[email protected]>
Date: April 21, 2015 at 8:52:55 AM CDT
To: Bowlerdusty <[email protected]>
Subject: Re: ACR 9000
Hi Dustin,
Since the product was not purchased from us, or through the Parker website, but through National Instruments, you would need to contact them and they should be able to help.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company - Automation Group
Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
Toll Free: 1-800-866-4568 ext 5352
On Mon, Apr 20, 2015 at 4:16 PM, Bowlerdusty <[email protected]> wrote:
Hi again. Since last speaking, we have gotten the motor to move. The only thing we are struggling on now is getting the hardware limits to work. We are using switches provided by Lintech. One pair of switches is mechanical and the other pair are non-contact reed switches. I found out earlier that the product was purchased from National Instruments Co. Anyway we could receive some help with this?
Thanks,
Dustin Brown
-----Original Message-----
From: Susan Connors <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Tue, Feb 3, 2015 12:52 pm
Subject: Re: ACR 9000
Dustin,
I am checking with our manager and engineers on this and will let you know.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
On Mon, Feb 2, 2015 at 3:10 PM, Bowlerdusty <[email protected]> wrote:
Could it possibly be under some other name? There are other divisions it could possible be under. This place is also under the U.S. Army Corps of Engineers, so it might be under that name. And if this wasn't purchased from this company, then where was it purchased from? This is the company I was sent to when I contacted the Parker Motion support.
-----Original Message-----
From: Susan Connors <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 4:13 pm
Subject: Fwd: ACR 9000
Hello,
We have checked and show no record of your company or this part being purchased from us, so this is not something that we can offer support.
I do not know of an integrator in your area but you should contact a local one that could possibly help you trouble-shoot any questions you have on this unit.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
---------- Forwarded message ----------
From: Bowlerdusty <[email protected]>
Date: Fri, Jan 30, 2015 at 3:59 PM
Subject: Re: ACR 9000
To: [email protected]
Any idea of when I'll get a response?
-----Original Message-----
From: AG Sales Fax <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 11:03 am
Subject: Fwd: ACR 9000
-- Can you please advise Company name and location so I can forward to appropriate contact?
---------- Forwarded message ----------
From: 'Bowlerdusty' via [email protected] <[email protected]>
Date: Fri, Jan 30, 2015 at 10:32 AM
Subject: ACR 9000
To: [email protected]
I was told to contact you guys for help with this. Can you be of some assistance?
-----Original Message-----
From: jhoagland <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Thu, Jan 29, 2015 3:44 pm
Subject: Re: ACR9000
There are free training videos on our website:
http://www.parkermotion.com/products/Controllers__6934__30_32_80_567_29.html
This unit was purchased through Cross Automation.
They are your local Parker ATC distributor and can give you assistance though the unit is out of warranty.
Their phone number is: 704-523-2222
Let me know if there’s any questions. Have a nice day.
Regards,
Jonathan
-----Original Message-----
From: Bowlerdusty < [email protected]>
To: emn_applications < [email protected]>
Sent: Thu, Jan 29, 2015 2:57 pm
Subject: Fwd: ACR9000
Here is a pic of the serial number and model number.
-----Original Message-----
From: emn_applications < [email protected]>
To: Bowlerdusty < [email protected]>
Sent: Thu, Jan 29, 2015 11:36 am
Subject: Re: ACR9000
On the other side of the ACR9000 is a label with the model number, SO and
serial number. Please provide.
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Bowlerdusty <[email protected]>
To
[email protected]
01/29/2015 09:19 AM
cc
Subject
Re: ACR9000
I honeslty don't know this information. This stuff was bought at least a
few years ago. A student who is now gone had put it together a while back.
There were a lot of binders with it for instructions but none of it was
very clear to me. I'm sending pictures with the parts I have
(controller,drive,motor,etc.).
-----Original Message-----
From: emn_applications <[email protected]>
To: Dustin Brown <[email protected]>
Sent: Wed, Jan 28, 2015 10:17 am
Subject: Re: ACR9000
OK. So now you'd program it using the Configuration Wizard in ACR-View and
the program editor.
Which Parker ATC distributor did you purchase this through?
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Dustin Brown <[email protected]>
To
[email protected]"
01/28/2015 07:58 AM <
[email protected]>
cc
Subject
Re: ACR9000
Hi thanks for the reply. We got it connected via Ethernet now. We had to
change the IP address of "local area connection" on the computer to
192.168.10.1 for it to see the controller. So now that it is connecting to
the controller, it keeps saying that the drives are all disabled. I have
one drive connected to the controller in the Axis 0 port.
Sent from my iPhone
On Jan 27, 2015, at 3:56 PM, [email protected] wrote:
> Did you change your PC's IP address?
>
> VIDEO: How to set your PC's Ethernet IP address
>
http://www.parkermotion.com/dmxreadyv2/faqsmanager/faqsmanager.asp?category=116&knowledgebase=faqman...
>
>
> Default is 192.168.10.40
>
> Is this a new ACR9000?
> If you don't know the IP address and the default doesn't work, you'll
need
> to connect via USB or serial to get the IP address or reset it.
>
> Regards,
>
> Jonathan
>
> ________________________________________________________________________
> Application Engineering Team
> [email protected]
> phone 800-358-9070 · international 1-707-584-7558
> www.parkermotion.com
> Parker Hannifin Corporation · Electromechanical Automation, NA
> 5500 Business Park Drive · Rohnert Park · CA · 94928
>
>
>
>
>
>
>
> Bowlerdusty <[email protected]>
To
>
[email protected]
> 01/27/2015 01:48 PM
cc
>
>
Subject
> ACR9000
>
>
>
>
>
> I am having a little trouble getting a connection between the ACR view
> software and the ACR 9000. I am attempting to use an ethernet cable for
> the connection. Every time I press the "connect" button it says "Failed
> attempting to connect to controller". Do you have any advice?
>
> Thanks,
> Dustin Brown
>
>
>
>
(See attached file: IMG_0864.JPG)(See attached file: IMG_0865.JPG)(See
attached file: IMG_0866.JPG)(See attached file: IMG_0867.JPG)(See attached
file: IMG_0868.JPG)(See attached file: IMG_0869.JPG)
1 Attached Images
Solved!
Go to Solution.
Attachments:
image.jpg ‏938 KB
image.jpg ‏1570 KB
image.jpg ‏767 KB

Hi thanks for the reply. Yes I have used the ACR view to specify which inputs to use before. I used input 0 for the positive limit, input 1 for the negative limit, and input 2 for the home switch. However, when using ACR view the switch kept displaying that the switch had been tripped when nothing was pressing against it. I would also try pressing on the mechanical switch to see at least if the value would change but to no avail.
Attachments:
image1.JPG ‏1642 KB
image3 (1).JPG ‏3768 KB
image2 (1).JPG ‏3247 KB

I got my iphone 5 Last christmas, all seem to be well then it started connecting a disconecting from the charger and then suddenly stopped so i bought a new charger, it would for a bit then stopped working again whats wrong?

I Got my iphone 5 last christmas, and then a couple of months after the charger started to conect and disconect, i thought at first it was just the cord so i bought a new one but then it happened again, from this day i have bought 6 iphone 5 chargers and now my 7th and its rarely working whats wrong? and also my sleep wake button isnt working properly? PLEASe HELP !

If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

Crystal 2011 getting Logon failed IM004 error when using ODBC (RDO)

I just installed Crystal Reports 2011 on Windows 7 Ultimate SP1. Sporadically, but way too often (I would estimate about 60% of the time), when I go to set up an ODBC (RDO) connection or refresh an existing report and enter the password, I get the following error:
Logon failed.
Details: IM004:[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_Handle_ENV failed
Other times, it just works, with no changed made. It seems to work slightly more often when using the SQL Server driver (the one for SQL 2000) as opposed to the SQL Native Client or SQL Server Native Client 10.0 drivers. But not often enough for that to be the solution.
I have tested this with a locally installed SQL Server (on the same machine as Crystal Reports) and remote SQL Servers, with SQL 2000, 2005 and 2008. Same results.
I have Crystal Reports 2008 installed on the same machine and have not once had this problem. I have tried using the same ODBC connections I already had from Crystal 2008 with Crystal 2011 and also to create new ones, same results either way.
Is this a known issue, or is there a switch/setting I need to change to make this work consistently? I am especially puzzled by the fact that it seems random, I have not been able to find any pattern at all.

Hi Victoria,
MS SQL Server 2008 has a client install now, the MDAC/WDAC doesn't install it as MS used to do with all of their OS's. CR also had to update the use of SQL Server 2008 to include the SQLNCLI10 client engine.
I suggest, if you have not already, install the Native 10 client from either the SQL Server CD or you can download the MSI from MS's site and only use the Native 10 driver.
MS kind of dropped ODBC and moved to OLE DB. The native client actually uses the OLE DB driver so using ODBC just puts another layer on top of OLE DB anyways. It's more convenient to use ODBC for deploying applications but it can affect performance.
Anyways, as noted, CR 2011 is still in Ramp up mode so this issue may have been tracked. If not though you can purchase a support case, if it's a bug then you'll get a refund, if it's a limitation in MS then no refund.
There is [SP 1 for CR 2011|https://smpdl.sap-ag.de/~sapidp/012002523100007683092011E/cr2011sp1.exe] - http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Seems to be a problem with that page right now so try again later... and apply SP 1 or wait until it goes GA and test again. If it's still an issue then you can log a case.
Firefox just got updated and it's failing, IE works though...
Thanks again
Don
Edited by: Don Williams on Jun 22, 2011 8:51 AM

Very low signal strength when using DLINK 2640t with mac mini

i have a mac mini and i have been using it fine with a 2wire wireless modem. However i have just switched to a Dlink 2640t (54Mbps (802.11g) Wireless ADSL 2/2+ Router with Built-in Modem, 4-port 10/100Mbps Switch) and have been getting very low signal strengths on my mac mini, resulting in me not being able to surf the internet. The modem+ router is located in the next room. Does anyone know whether its the problem with the modem router or mac mini's airport wireless problems with the router itself. It worked perfectly fine with my previous 2wire wireless modem
please help!

Did you reset the router after you updated router's firmware? Its always recommended to perform a reset after firmware upgrade on the router.
Please refer to the link http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=eaa3127db5f4402584c959a7251e754c_4008.xml&pid=80&r...
For wireless range and signal issues, try changing the channel on the router to either 1,6,9 or 11.
Please refer to this link on changing wireless channel and SSID (network name)
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a0fb6c64337e47eb9e3e1027f364e70c_154.xml&pid=80&re...

HP Pavilion gets hot and shuts down when using battery

Have HP Pavilion dv7 and when using it on batter it gets real hot and shuts down. What is the fix? Thanks.

sorry guys i was using the wrong driver i was using the normal one not the powernow k8 or w/e i needed

Why do I get a "call ended" alert when using Googles Maps through hands free Blue Tooth service in my car

Why do I get a "call ended" alert after voice directions, when using Googles Maps App with my iPhone 5s paired to Bluetooth service in my GM auto

Hello Snosilla! I'm so sorry for all the confusion and for all the time taken to activate service with us! I do see that the iPhone 5c is $99.99 right now. The iPhone 5s is actually $199.99. There's no need to call Pam anymore, we can take over from here.
I've followed you in the forums. Please accept me, and follow me back. Then, send me a Direct Message and I can look into this for you. If you do not have an active line yet, I may need to get you through to our activations department, but I will do all I can!
Thank you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport
VZW Support

Cannot get the details in ME2N when using ALV but can when using BEST

Hi experts,
Could you let me know why I am not able to get the results when using ALV as Scope of List in ME2N Transaction, but can get data when using BEST?
Regards,
Pri

Hi Priya,
Check the following :
IMG-> Materials Management-> Purchasing-> Reporting-> Scope of List->Define Scope of List
Here select ALV and click details.
Check the check boxes you need.
Cheers,
Satish

My new 7D gets very dark pics indoors when using "automatic" settings. Whats wrong?

Similar Messages

Maybe you are looking for