My new Apple id does not show in I tunes

my original ID was an @me.com account however when I forgot my password to this account I changed my Apple ID to @live.co.uk and is saved as this unfortunately my I tunes sign in box still pops up with my old user account details of @me.com and so I can't log into I tunes to get updates etc as it tells me that my account has been disabled - how do I get I tunes to accept my new Apple ID - this has been driving me nuts for months so any help with this will be very much appreciated.

All content that you download from the store are tied to the account that downloaded it, only that account can download updates to its apps (and potentially redownload its purchases).
You can log out of an account by tapping on it at the bottom of the Featured tab in the App Store app, or in Settings > iTunes & App Store, and you can then log in with a different account.
But as you created a new account you will need to get your old account re-enabled to download updates to the old account's apps - or delete the apps and repurchase and download them with your new account. You might be able to re-enable the old account via this page : http://appleid.apple.com, then 'reset your password' (and then log out and back into the account on your iPad as above, so as to 'refresh' the account on it)
If that doesn't fix it then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Similar Messages

  • TS3798 My Apple TV Does NOT show the Internet menu option. Has all the other options but the Internet. I am connected to the Internet as I can  Rent, Buy ,etc..movies from the Apple Store...

    I have a first Genreation iPAD and just a new Apple TV, 3rd Generation. The Apple TV does not show the Internet menu option after booting up.

    There isn't one.
    AppleTV3 has icons for all the internet features.

  • Why apple tv does not show in itune?

    why apple tv does not show in itune?

    Welcome to the Apple Community.
    I assume you have the Apple TV 1.
    Often a restart of ALL your equipment will help, it may also be a result of instaling or updating security software (check your security settings).
    If problems persist, navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • Double clicking a new e-mail does NOT show whole e-mail

    double clicking a new e-mail does NOT show whole e-mail unless I go to forward or reply. In other words, I may see a couple sentences, then it's just blank, no scroll bar either. This gets annoying. Anybody else get this or know how to overcome this?
    eMac 800mHz   Mac OS X (10.4.6)  

    Well, there is no such thing as an AOL type account in Mail. Such an account must be set up as either POP or IMAP. Nevertheless, knowing that the ISP for one of the accounts is AOL is useful because it seems that other people also have this problem with AOL -- see Chuck Coulson's and smackwell's posts in this thread.
    I don't think I'll be able to help you with the AOL account other than telling you to try rebuilding the mailbox -- select the mailbox and choose Rebuild from the Mailbox menu. Have you tried that?
    The problem shouldn't happen with the POP account, however. Do you experience the same problem with it as well?

  • My Apple TV does not show up under devices, and more.

    Okay, firstly, I am relatively new to Apple ptoducts.  I was recently purchased an Apple TV and a 27 inch iMac by my lady.  And yes, I realize how amazng she is.  She bought me these gifts to ensure that the last two and the next 4 months go by smoothly.  I was struck by a car while it was doing 65+ mph, than struck again by the same car, than ran over and jumped off of.  Yeah.... So needless to say I have severe brain damage, lost memory, a leg that is now 52% titanium and worse, I can not use my right arm.... for now, it may recover with the next two years.  so, I tell you this for a little "guilt" but mostly to excuse the formatting of this email.  It was typed entirely on my iMac and entirely using one hand, and not my primary hand at that.
    I am not new to iTunes, I had a few purchases before this issue.  Between those purchases and my Apple TV "FUN" I have amassed quite a few: Seasons of TV and Movies. 
    1:   When I log in to my Apple TV, I can see all of the purchases that I made using both the Apple TV and those that I made previously using iTunes on my Windows based PC.  All is well.  They are organized by type and sorted perfectly.  That plus they stream quicky and completely.
    2:   When I turn on my iMac and start iTunes, I do not see my TV seasons or Movies under the "Library" section on the left side of my iTunes screen.  I see the options, they are simply empty.  I see no content listed within them.
    3:   I can however select the "Purchased" option under the "Store" section on the left hand side of the screen.  Once inside that options area, I can click on "Download Previous Purchases" in the lower right hand corner of the screen.  From there I can see all of my purchased TV and Movies, including those that I had previously purchased on my old windows PC and those purchased recently on my Apple TV set.  That and I can download them and make them available to my iMac version of iTunes.
    5:   I am unable to see my Apple TV listed under the "Devices" section.  I also do not see the "Devices" section at all, however I assume that is because it is currently emty.
    QUESTIONS:
    A:   Can you stream data such as TV seasons or Moies while using iTunes on an iMac.  Similar to the way that you stream them from your iTunes purchase histor while viewing them on an Apple TV?  Or do I need to download them inorder to view them?
    B:   Is Apple TV shown under connected devices while it is connected to the Wi-Fi netwok?  I can see my Iphone under devices when I connect it with a cable to my iMac.  So I know that my devices section is working.  I simply fear that my Appl TV is not showing up brcause of existing issues.
    NOTES:
    A:   All of my devices are updated with the latest available drivers.
    B:   My Apple TV, iMac and iPad all work on the same Wi-Fi network.  That and they are all connected to the same iTunes account.
    C.   My lady is using a different login for the iMac.  Her iTunes is setup but is not usng my iTunes account, it is using her account and has access to her DATA.  When I log in to the iMac, my iTunes is working and is different from the iTunes that is operating under her username.
    Ok Guys..and Gals please help me out.  The thing is, none of this is truly effecting me in a substantial manor.  I can see my purchase history, I can download parts of it to my iMac via iTunes, and my Apple TV is smoooooooth.  I mainly need clarification on the questions that I asked.  Can I stream using the iMac, should I see my Apple TV under devices, and why do I not see my DATA under the library section of iTunes?
    THANK YOU for you time.  Remember, I am relatively new to Apple as a product.  And I fricking LOVE it. 
    When I was in my accident, my arm, my leg, my skull, my brain, my clothing, my key chain and my wallet, were all destroyed.  But my iPhone survived.  I have records both police and medical to prove this.  The one way I had to have any initial memory of my friends and family was in that phone.  I still have that phone, I always will.  So Apple if you need an awesome commercial for your iPhone, Vince has got your back!!!

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • My new iPad mini does not show under manage devices

    I just purchased a new iPad mini for my husband. I removed his old one from the section of iTunes that reads manage devices. And even though his new iPad mini is synced and backed up, now the new one does not show under manage devices.
    Can anyone tell me how to get it to show up? I called Apple support and the lady trying to help me did not even know what I was talking about.
    Thank you.

    If you're on Windows read this support article.
    If on Mac, read this one.

  • My new apple tv does not start after showing apple logo in LG Tv

    I have got new atv3 and hooked it to hdmi port 3 on my LG tv
    After displaying logo ao apple it shows no signal
    I had also tried to restore software of apple tv but still problem remains.
    Please help me what to do ?
    Thanks

    I would test with another tv it could be that the lg does not support the resolution the appletv is trying to send
    with the other tv for testing one could then try changing the reslotion and test with the LG again

  • Apple TV does not show up in device list

    I've read all the post with the same subject but still can not get the Apple TV to show up in the device list of itunes.
    I have multiple computers on a wired/wireless network, one is a windows XP laptop machine and it sees the Apple TV fine, can sync with itunes works great. This machine is connected via wireless connection. This machine does not have my music or photos that I want to sync so I want to sync the Apple TV with my desktop, I was just using the laptop as a diagnostic tool and to better understand the interaction between itunes and the Apple TV. I have tried all the steps given and still can not get the Apple TV to show up as a device on the desktop.
    I originally had norton firewall on the desktop, uninstalled that so it would not be in the way, did not help. Windows firewall is not enabled.
    I have sharing enabled in itunes and I have look for Apple TVs enabled. I have rebooted the router, Apple TV, computers etc. Reinstalled itunes.
    I have a linksys wreless router in the system. I have tried connectnig the desktop via a wired connection as well as a wireless connection, no difference. The Apple TV can get on the wireless network fine, it can access the internet fine to play movie trailer etc. I have also connected it directly to the router via a cable, does not help. I tried connecting the desktop to the Apple TV directly with a crossed ethernet cable, did not work.
    The desktop can ping the Apple TV.
    I am assuming I do not have a problem with ports as the laptop sees the Apple TV fine?
    Any suggestions or tips would be greatly appreciated

    Welcome to the Apple Discussion Forums.
    To summarise and for clarity: You have set up your laptop itunes library and it works as it should with the tv, now you are trying to add your desktop and it doesn't see the tv.
    First point: the Laptop is your primary library, you can only have one primary library and if you wish to sync from the desktop you will need to make that your primary library instead of the laptop. You will need to turn of syncing for the laptop and register the desktop with the tv for syncing first and then the laptop as a secondary (streaming only) library. If you are trying to use your desktop without de-registering the laptop it will only ever be a secondary (streaming) library.
    You may have realised this and if so all well and good, but if not you might want to continue to establish your desktop as a secondary library and satisfy yourself that all is well before turning off your laptop and setting everything up again.
    On the assumption you are setting up the desktop as a secondary library at this time, how far have you got with registering the desktop, have you successfully entered the pass codes, did the tv show in the device list at any stage. As a secondary library itunes will only show the tv in it's device list when that itunes library is selected as the source library from the tv itself, could this be why you are unable to see it in the device list.

  • My Apple TV does not show all of the movies in my library.

    All are in the movies category, no home videos here.  It almost seems to be movies that I have removed from a device.  At least some of the ones not showing up were recently removed from my iPad.  Came back from a trip and removed some of the movies that I had watched, but then my wife wanted to see them so we tried to pull them up on the Apple TV, but no luck.  I am not 100% sure that they were showing up on the Apple TV before, but I know they have been watched on my iMac.  I know all about the miscategorization of others but that is not an issue here.  Any thoughts?  Does the Apple TV have a limit???  Is it better to put them into a playlist when I want to see them?  I have about 15 more to add and if still no luck I may reload iTunes and let it refind the library and see what happens.  Thanks in advance for any help!
    BTW my OS is iOS version 7.0.5, but that was not in the list.
    Andy

    I have the entire original Star Trek series on the computer, all tested, watched and working fine.  They are all MPEG-4 video files, and I can watch them on multiple computers and TVs when pulling directly from my network.  They are labeled "Star Trek Episode 15 Shore Leave" and so on.  Before I went out of town I loaded episodes 1-12 onto my iPad to watch while traveling.  Again, they played fine.  When I returned I had only watched the first three, so when I resynced my iPad I removed those three (episodes 1-3) and put on some other movies.  Tonight when I went to watch them on the Apple TV I find that those three specific episodes are missing from the Apple TV list, so the ST episodes start with #4.  Just kind of weird.  These episodes are all the same version, done at the same time, the same way, no differences between them, even in size.  Must can't figure out what is keeping them off of the list but it seems to be more than just coincidence that the three I notice missing are ones that I just removed from my iPad.
    Also as to the iOS version you are correct, my typo, should be 10.7.5. 
    Thanks for the help and just to clarify I checked with one of my purchased movies as well as the manual ones and two do not show up, both again removed with the last sync.  But they are still in the library!  Can't figure it.
    Andy

  • New Domain Controller does not show in our different site's Domain controller's Sites and Services

    Hi,
    we have two sites in our AD environment. OMA site and NY site. we have three domain controllers in our OMA site and two domain controllers in our NY site. All our DCs are windows server 2008R2 except one in our OMA site that is 2003R2 the domain
    functional level is also 2003R2.
    We decided to raise our functional level to 2008R2. I added a new domain controller in our OMA site and transferred all FESMOS from the DC that was running 2003R2 to this new domain controller.
    the issue now is that our NY site does not make any connection with the new domain controller in OMA site. it does not even show it under sites and services. I have checked the DNS settings and everything. if you try to replicate the connections
    from NY site it gives the following error: "The naming context is in the process of being removed or is not replicated from the specific server."
    can anyone plz tell me why this is happening mt brain is just frozen at this moment and cant figure out why is this happening

    Just noticed this replication issue has been going on for a while now but we never noticed until I added new DC. here is the error log for the NY site DC.
    Log Name:      Directory Service
    Source:        Microsoft-Windows-ActiveDirectory_DomainService
    Date:          1/4/2014 8:11:40 AM
    Event ID:      2042
    Task Category: Replication
    Level:         Error
    Keywords:      Classic
    User:          ANONYMOUS LOGON
    Computer:      NORDC1.vertrue.com
    Description:
    It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded the tombstone lifetime. Replication has been stopped with this source.
     The reason that replication is not allowed to continue is that the two DCs may contain lingering objects.  Objects that have been deleted and garbage collected from an Active Directory Domain Services partition but still exist in the writable partitions
    of other DCs in the same domain, or read-only partitions of global catalog servers in other domains in the forest are known as "lingering objects".  If the local destination DC was allowed to replicate with the source DC, these potential lingering object
    would be recreated in the local Active Directory Domain Services database.
    Time of last successful replication:
    2013-05-16 15:26:38
    Invocation ID of source directory server:
    9236ac56-d046-4632-b072-acbe823c5f6c
    Name of source directory server:
    accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com
    Tombstone lifetime (days):
    90
    The replication operation has failed.
    User Action:
      The action plan to recover from this error can be found at
    http://support.microsoft.com/?id=314282.
     If both the source and destination DCs are Windows Server 2003 DCs, then install the support tools included on the installation CD.  To see which objects would be deleted without actually performing the deletion run "repadmin /removelingeringobjects
    <Source DC> <Destination DC DSA GUID> <NC> /ADVISORY_MODE". The eventlogs on the source DC will enumerate all lingering objects.  To remove lingering objects from a source domain controller run "repadmin /removelingeringobjects <Source
    DC> <Destination DC DSA GUID> <NC>".
     If either source or destination DC is a Windows 2000 Server DC, then more information on how to remove lingering objects on the source DC can be found at
    http://support.microsoft.com/?id=314282 or from your Microsoft support personnel.
     If you need Active Directory Domain Services replication to function immediately at all costs and don't have time to remove lingering objects, enable replication by setting the following registry key to a non-zero value:
    Registry Key:
    HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
     Replication errors between DCs sharing a common partition can prevent user and compter acounts, trust relationships, their passwords, security groups, security group memberships and other Active Directory Domain Services configuration data to vary between
    DCs, affecting the ability to log on, find objects of interest and perform other critical operations. These inconsistencies are resolved once replication errors are resolved.  DCs that fail to inbound replicate deleted objects within tombstone lifetime
    number of days will remain inconsistent until lingering objects are manually removed by an administrator from each local DC.  Additionally, replication may continue to be blocked after this registry key is set, depending on whether lingering objects are
    located immediately.
    Alternate User Action:
    Force demote or reinstall the DC(s) that were disconnected.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS Replication" />
        <EventID Qualifiers="49152">2042</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>5</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-04T13:11:40.963263500Z" />
        <EventRecordID>38018</EventRecordID>
        <Correlation />
        <Execution ProcessID="660" ThreadID="1596" />
        <Channel>Directory Service</Channel>
        <Computer>NORDC1.vertrue.com</Computer>
        <Security UserID="S-1-5-7" />
      </System>
      <EventData>
        <Data>2013-05-16 15:26:38</Data>
        <Data>9236ac56-d046-4632-b072-acbe823c5f6c</Data>
        <Data>accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com</Data>
        <Data>90</Data>
        <Data>Allow Replication With Divergent and Corrupt Partner</Data>
        <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
      </EventData>
    </Event>

  • Applet detect new particeipent  but does not show  any output.

    hi,
    I have written one applet which uses AVReceive2 as inner class.
    This applet detects new particepent joined but does not take any action like showing or playing movie.
    I cant understand where I am wrong.

    Doublechecking, KAT ... is the Device Screen looking a bit like the following screenshot?
    Which particular Windows OS are you using? (XP, Vista or 7?)

  • My apple tv does not show up on itunes

    i pluged my apple tv 2nd generation into my computer and it didnt show up in itunes

    Thank you
    i will read up on how to use my new apple TV
    Colorme20

  • Apple tv does not show up on my mac

    I have a brand new mac - and and brand new apple tv - yet they don't see eachother and I can't mirror my mac to show up on my flatscreen (they are on the same wireless network)
    Here are the specs on my mac:
    MacbookPro - Retina, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    I'm on mtlion 10.8.2 - the appletv has also been updated - this shouldn't be that difficult - please any help is welcome!
    Vera

    Have you checked AirPlay is turned on with both devices (Apple TV > Settings > AirPlay and System preferences > Displays)

  • How do I remove an old phone number from my macbook imessage. My apple ID does not show the number anymore but I cannot remove it from the imessage accounts. Its driving me mad !

    Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....

    Hey Chappers64!
    Here is an article that will help you with this issue:
    iOS: Deactivating iMessage
    http://support.apple.com/kb/ts5185
    If you have already tried these steps, you will want to utilize the information at the end of the article:
    If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for

  • Safari 5.0.2 Crashing - Please Help

    I've searched the forums in hope of solving my problem but am still at a loss. I'm running Safari v5.0.2 which, as of yesterday morning, keeps crashing. On the rare occasions it has stayed open long enough for me to try and open a new window, that wi

  • Need Help in Mat View Creation

    I have the following query to create a mat view CREATE MATERIALIZED VIEW IB_CONT1 REFRESH FAST ON DEMAND WITH ROWID AS   SELECT         CUST,         CONSEQ,         STD,         ENDD,         ADD      FROM      ADMIN.CONTACT@IB_DBLINK;But it display

  • Layout Header

    Hi experts, I have a simple report. On the selection screen I have to check a B_BLOCK parameter for change layout Header. My question, in this case what is the meaning of change layout header??? And how can I handle it?

  • JAX-RPC RI expert

    Hi, I am trying to use wscompile (JWSDP 1.3) to compile a web service that has a method whose return type is a class below. package sample; public class Test { public Test() { } I got an error: invalid type for JAX-RPC structure: test.Test Now strang

  • Stumped-using the summarize feature in Preview with Automator

    I'm scratching my head on this one. I am trying to create a workflow that basically does the following: Find designated files Open with Preview Run the Summarize feature within Preview The "running the summarize" feature is obviously not one of the p