My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password.  How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password.  How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

Similar Messages

  • New Hard Drive Does not exist!

    Hello, 
    I have an HP DV6 -3142 Laptop and recently after owning it for around a year, my hard drive seems to have crashed. When I try to boot up the laptop, it asks me to use system repair to "repair" my problem or start windows normally. Booting normally causes the laptop to be stuck at windos and revert back to booting up again (it's like a closed loop!). If i choose to "repair" I get stuck at a blue screen where the HP system recovery is supposed to help me either reset to factory settings or do a system restore. I also did a hard disk test in the BIOS and got an error 303. I had done a bit of research and from what i heard, It was a hard drive problem. I got a new hard drive (Samsung) and now when I try to install windows 7, It says that there are no devices to load windows 7 onto. In other words, the Hard disk does not exist (also did a test in bios). I tried to reseat the hard drive and reset BIOS, it didn't work. Now, when I try booting the new hard drive, it shows me a message saying "Media test failure: check cable".
    Any ideas on how i could go about fixing this problem?

    Welcome Larg.
    Sorry but it sounds like your new hard drive is DOA.
    If you have a SATA to USB I would hook it up to another computer and  test it that way.
    Or you may try to install it in another computer and see if you can test it that way.
    Sorry.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • New hard drive does not get recognized by OS X server 10.6

    Xserve disk utility does no see the new HD. It is not HD issue as I have tested drive in other carrier, switched drive in different bays, booted from Xserve 10.6 dvd and 10.6 Server image in our net boot. Drive is not seen by disk utility. Even put in an Apple original (Mac Pro) HD. We have verified that. memory, HDD carrier and HD Bay are not defective.

    Thanks John for the reply. I tried different new hard drives as well as a HD from Mac Pro server.I did try drive in different bays. Other 2 drives in the Xserve are recognized in all bays.I even switced HD carrier. Nothing seems to work. I found the following notes in the Xserve manual. I could not fully understand that. May be you can help me understand this.
    Xserve (Late 2006) includes three hard drive bays on the front panel. Hard drives come as
    modules, known as Apple drive modules (ADMs), attached to carriers; they are removed from or
    installed in the Xserve as a unit. ADMs have been available from Apple in various capacities for
    all Xserve and Xserve RAID models, and in multiple interface types. Xserve G4 and Xserve RAID
    use parallel ATA (PATA) ADMs, and Xserve G5 uses serial ATA (SATA) ADMs. Xserve (Late 2006) can
    use SATA ADMs, and ADMs with a new, third interface type known as serial attached SCSI (SAS).
    It is important to understand ADM forward compatibility and backward compatibility with older
    Xserve models, since some combinations of ADM and Xserve or RAID work properly while other
    combinations do not. The following table summarizes this compatibility.
    Xserve G4 Xserve RAID Xserve G5 Xserve
    (Late 2006)
    Xserve (Early
    2008)

  • Ibook g3 hard drive does not show up after new installation

    I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    Scott

    Hey Scott,
    The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
    Richard

  • I got a new computer and backed up my iTunes library to an external hard drive.  The external hard drive is not allowing me to access the drive.  Is there a way to transfer the songs from my iPod touch to my new computer?

    I got a new computer and backed up my iTunes library to an external hard drive.  The external hard drive is not allowing me to access the drive.  I no longer have access to the old computer.  Is there a way to transfer the songs from my iPod touch to my new computer?

    That's a bummer, didn't realize the exHD files were corrupt, esp if you have tried from another PC and not just this new computer.
    You can get purchases from the itunes store transferred from an iPod using these directions:
    http://support.apple.com/kb/HT1848?viewlocale=en_US
    If you want everything (meaning non-itunes songs, app data, photos, etc) you need to buy a 3rd-party ipod manager that support iTouch. Here is an iLounge article to start your research:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P2/

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • External hard-drive does not reconnect after sleep

    Hi everyone
    I am trying to use my Energy Saver to SLEEP my iMac after 1 hour. It goes to sleep no problem, but on wake-up, my external USB hard drive does not reconnect. There is also an error message that I didn't disconnect the drive properly. I fear this may be one of Mac OS X's "features". Has anyone encountered the same thing?
    On a side note, I also find that my USB keyboard does not always reconnect as well. I use a windows USB mouse that I have connected to wake it from sleep, however my USB keyboard (the small one for Macs), sometimes does not allow me to type unless I unplug it and back in.
    Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.

    r_dizzle wrote:
    Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.
    I think this might be the issue. If the iMac is waking back up, it will likely be waking up this HUB, but the HUB might not be re-initialising the connection between OS X and the external drive or the keyboard.
    After waking the iMac, if you unplug the external drive from the HUB, then plug it back in again, does OS X pick it up again? Have you tried plugging the external drive directly into the iMac and then testing what the result is?
    If you read back on what you've said, you pointed out that you have a USB mouse that you use to wake the iMac from sleep. Is this mouse directly connected to the iMac? If so, it surely can't be a coincidence that a directly connected USB device can wake the iMac from sleep, but any USB devices connected to the iMac via a USB HUB cannot.
    I would suggest you test the drive as it is directly connected to the iMac. I would complete the same test with the keyboard too. I think you'll find it's the USB HUB.
    I hope this helps.

  • External hard drive does not shut down

    Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

    My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
    If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

  • HT3275 Time Machine says my external hard drive does not have enough

    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.  I recently added memory, which may confuse Time Machine into thinking it is a new computer.  How can I erase old backups and complete this one?

    Walter Goodman wrote:
    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.
    See #C4 in Time Machine - Troubleshooting. 
    If that doesn't clear it up, how much data is on your Mac?  If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
    It sounds like your backups may be corrupted.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    I recently added memory, which may confuse Time Machine into thinking it is a new computer.
    If that's all you did, no.  
    How can I erase old backups and complete this one?
    Just erase the drive per #1 or #2 of Using Disk Utility.

  • Hard Drive does not have enough space/error message

    Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
    I only have a 1 GB machine. What am I doing wrong?
    When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
    The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
    In addition, it turns itself off often, for no apparent reason. Any ideas?
    Thanks!
    J.Renee

    The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
    To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
    You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
    If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • My brand new iPhone 5c does not allow me to view messages...

    My brand new iphone 5c does not allow me to view messages that I have sent. They simply disappear immediately after hitting the "send" button. Also I am unable to send iMessages. I have tried resetting the network settings and have also tried the hard reset. Nothing works. Help.

    Hi MaddyMontana,
    If you are having unusual issues with Messages on your iPhone, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen them):
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • New hard drive is not recognized by my MacBook Pro.

    New hard drive is not recognized by my MacBook Pro. The supplier says I need to update my BIOS. True? How do I do that?
    Hard drive: NN2-72-500-SSE Seagate Momentus 7200.4 (ST9500423AS) 500GB Laptop Hard Drive
    Mac OS: Mac OS X Lion 10.7.5

    I went through a similar issue with a Seagate Momentus 750GB HDD/8GB SSD with my late-2011 MBP.  No matter what I tried, the machine would not recognize the drive.
    To test it, I installed the drive in an old ThinkPad, and it worked fine.  Then I tried installing it in my PS3, and the drive worked fine there, too.  It was only the MBP which had issues.
    I don't *think* Macs have a BIOS to update.  But I know my MBP has issues with certain HDD's (including another external which works fine on other Macs and all Windows machines).
    You might be able to find my thread by searching under my username, perhaps something in there will offer a tip.  Otherwise, you might have to go the same route I did: install a WD Scorpio Black instead.  Or upgrade to an SSD.
    Good luck to you-

  • External hard drive does not show up

    External hard drive does not show up in imovie.

    Hi,
    Welcome to the Discussions.
    The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
    John

  • X102e - Hard drive does not boot into Windows

    Hi, I was trying to reinstall Windows on my X120e.
    I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
    After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
    When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
    Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

    Thank you for reply.
    This is not exactly the issue. I was talking about the HDD originally installed in the PC.
    The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
    As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

Maybe you are looking for