My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer
Greetings:
I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer. I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord. I'm not finding any option to install it as a usb printer. Please help asap. I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me. I NEVER had this problem w/Dell. (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation. that option is absent in my attempts).
Thank you!
This question was solved.
View Solution.
Firelily, welcome to the forum.
Here is the download page for the driver and the software for the printer. If you install it, you should be able to print.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
Similar Messages
-
my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.
it says "itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes." I click OK
then I click the restore button
Then the box says "Are you sure you want to restore the iphone to it's factory settings? all of your.....etc." I click Restore and Update
then it goes into software update
at the end of the software update it says "Itunes has detected an iphone in recovery mode...."
All this time, the screen of the iphone stays on with USB to Itunes
I might add that while the phone was in it's first attempt at recovery mode, it was accidentally unplugged.
any suggestions? -
where are all the songs and whole albums i bought for i tunes? i have a new macbook but iTunes has none of my paid for music
Your purchases won't automatically show in your new Mac's iTunes library. If you go into iTunes > Preferences and on the Store tab tick the 'show iTunes in the cloud purchases' then what you can redownload should show in the Music part of your library with a cloud icon against them - click on the cloud to download them. Or click on your name towards the top right of iTunes and then click Purchased on the popup, and you can redownload them from there.
If you've moved countries since buying the music, or if the rights-holders have removed them from the store, then you won't be able to redownload them. In that case if you still have your old computer then you could copy them over from that (e.g. via an external drive : How to move your iTunes library to a new computer - Apple Support or via home sharing), or copy them from your backup of your downloads/library and add them via File > Add Too Library -
The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.
I found out that I have 2 female ends, my question is where can I find the adapter with 2 male connectors? and what about power supply to monitor?
-
My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".
My Dell Inspiron 1525 laptop is USB connected to my Canon Pixma MX392 multifunction printer. Though the
printer is functioning properly in all respects, a message is showing that my laptop "cannot detect" the printer.
At the same time I'm receiving a message (wizard?) "Found New Hardware - Windows Needs to Install Driver
Software for Your Universal Serial Bus (USB) Controller". My Printer folder shows my Canon is "ready",
and the Port is shown as "USB..Virtual printer port for Canon MX390 series Printer". My Device Manager
folder lists the Canon printer and fax under "Printers", and under "Universal Serial Bus (USB) Controllers"
are listed: MX390 series (1 time); Universal Serial Bus (USB) Controller (7 times); Unknown device (7 times);
USB Printing Support (2 times). I've tried unistalling and re- installing everything associated with the printer,
but get the same results. As I've stated the printer is functioning fine, but the "incessant" appearing of the
message, "Found New Hardware, etc." is extremely annoying. When I follow the "wizard's" instructions to,
"locate and install driver software (recommended)", I'm finally told to" insert the disc that came with your Universal Serial Bus (USB) Controller". I don't have any discs that came with either the printer or laptop. Is
anyone able to make any sense of this...and, hopefully, offer help in getting rid of the "Found New Hardware"
message. Many thanks!I'm not sure the error is related to your printer.
http://www.tomshardware.com/s/install+driver+universal+serial+bus+usb+controller/
Have you tried going to the Windows Update software program and seeing if there are any udates related to your message?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?
Connect your iPad to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.
Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
-
Windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.
windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.but still dey show up
Whaat version of Mac OS X?
When do the windows show up? -
All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?
No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot
-
My ipod touch has the usb connection wire picture on the screen. how do I fix it?
Help with resetting my ipod touch. The sceen has the usb cable conected to a computer or badger. Thank you
Do as the manual says and restore it:
iPod touch User Guide (For iOS 4.3 Software) -
I just got an Apple TV (the newest black one) and I have an older Pioneer HD TV. I noticed that I don't have a HDMI port on the TV and only a USB connection. My question is, can I still hook up the AppleTV to my TV with other connection wires and will it still allow me to use my ITunes music, photos and Netflix with the same picture and sound quality?
Thank you!Welcome to the Apple Community.
The Apple TV will not work over USB, the only type of connection supported is HDMI. -
I have a iphone 4 tried to upgrade to ios5 and the phone froze. I upgraded itunes before starting. Now the sceen is black with a usb connect to itunes icon in the middle of the screen. I turned the phone off and restarted it, and also have turned off the computer and restarted it. nothing is working. Anyone have a solution?
Do as it suggests and restore the device.
-
My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?
Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.
-
Why Has Adobe Removed The Option For Individuals To Purchase Software And Not Use The Cloud?
As an individual who has been using Adobe products for about 25 years for my personal use and not as a business, I find the new policy of "renting" the software and using "The Cloud" for, at least in my case, a prohibitive monthly fee, to be totally unacceptable and will result in my no longer being able to afford using Adobe products. I do not understand why Adobe cannot offer their new cloud program for individuals and companies that may wish to use the new system and have the resources to pay in perpertuity, but they should also have the option for those of us who would rather purchase upgrades for whatever programs we use and keep them on our computer without "The Cloud" service.
I am 67 years old and living on a fixed income. I basically use four adobe programs... Photoshop, Premiere, After Effects, and Audition as I do volunteer work at a local non-profit radio and tv organization. If I were to "rent" those individually it would cost $80 per month... so I could take the next deal and get access to all software for $50 per month... I cannot afford either of those. If I could upgrade one or more of the programs every two or three years... keeping them on my computer and not using "The Cloud," then continuing to use the products would be doable. However, being forced into a program that requires a monthly fee and use of "The Cloud" which I do not need to use, seems totally unfair. I certainly understand that there are businesses and individuals who will love the new program, but why not have the option? Or perhaps a "Senior" discount as you do for educators and students?
Something to think about. It seems Adobe may be moving to the "Cable Television" model of monthly fees that will go no where but up.Hey there, you may have heard that Adobe is continuing to sell and support CS6 for customers who prefer traditional licensing. It's last year's version instead of the latest-and-greatest CC release, but it's something to consider if that's important to you.
As far as a "senior discount" on Adobe software, there has never been one – but one thing to consider is becoming a student or teacher because there is no age restriction on that, in which case you may become eligible for education discounts.
Hope this helps. -
I have been fussing for hours with a Canon Pixma MX479 printer I received as a gift. The printer was obviously designed for PC control, and has terrible instructions for setting up the wireless capability, but I finally found a few hints online about how to add a WPS printer to my Airport Extreme, so I can finally detect the printer. However, when I try to add the printer, either under System Preferences or while just doing a print, my MacBook requires that I download a driver from Apple to use it. When I attempt to do that, I get a message the driver software is unavailable from Apple and that I should contact the manufacturer for the driver. I have already downloaded and installed the Mac OS driver from Canon twice, but my MacBook apparently can't find it. So I am forced to use Airprint in order to communicate with the printer. I would like to use the proper software to make sure I am accessing all of the features the printer offers. Can anyone tell me how to associate the downloaded driver with my printer when I am attempting to add it?
Hi Dwntso!
Welcome to the Canon Forums and thanks for posting!
So that the Community can help you better, we will need to know any error messages you're seeing either on your computer or the printer, and the version of OS X you've got on your MacBook as well as the way you intend to connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!
Maybe you are looking for
-
Defined Groups for Cisco Jabber Group Chat
I dont think it is possible based upon this document but wondering if anyone knew any secrets out there. Is it possible to create predefined groups in Jabber for Windows preferably as defined in Active Directory or on the client side? We want to have
-
How do I sync game progress between iphone and ipad
I have several "long term progress" games on my iphone 5.I bought an ipad mini and would like to sync the progress of each game on both devises.I have have game game progress erased in the past, possible from incorrect procedure. What is the best wa
-
Will windows 8 work on a late 2009 27 inch iMac
I have a late 2009 27 inch iMac, 3.06 GHz Intel Core 2 Duo, 4GB RAM I recently upgraded to Yosemite, 10.10.2 I have previously run Windows XP in Bootcamp I need to upgrade my Windows because my banking software upgrade no longer works with XP The qu
-
How to send different value of presentation variable in GO URL??
Hi there, I'm using GO URL to send presentation Variable (d_pv) to filter other report on 'day' column..... '(a href = http://server/analytics/saw.dll?GO&path=/shared/BI%20Reports/Ki1/KPIs%20Detail%20Priority%203%20Shipped&Action=Navigate&p0=1&p1=eq&
-
SYS, SYSTEM and SYSAUX when full database refresh.
I took full export from database using below command expdp "'/ as sysdba'" full=Y directory=DPUMP_DIR dumpfile=expdp_11032011.dmp logfile=expdp_11032011.log Now, I need to import this file to an other database. When do schema refresh we usually drop