My new installation of iTunes won't open, please help me!

I have tried installing the newest iTunes and uninstalling as it will not open at all. I keep getting the generic Windows message that iTunes has encountered a problem and needs to close. I tried uninstalling Quicktime and using the Apple quick fixes for iTunes version 7.0 not working but nothing helps. Anyone?

+I keep getting the generic Windows message that iTunes has encountered a problem and needs to close.+
let's first check to see if this is associated with a problem with your QuickTime. (iTunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

Similar Messages

  • Itunes won't open please help!!!!!!

    Please help me I installed my itunes and quicktime, but the itunes wont open. I tried redownloading itunes and I even tried to install an older version of quicktime. It opened than but wouldn't work said that I needed to have the updated version. So I reinstalled the updated versions. And again it just gives me the hour glass symbol than nothing. I do not have norton and no other programs will interfer with it. Can someone please help me?

    Hey jimmymohawk,
    What is the exact error message? Is it saying that Quicktime needs to updated?
    This article: http://docs.info.apple.com/article.html?artnum=93976 should help you get iTunes installed sucessfully. Quicktime will have to be uninstalled, you may have to use the part of the article "Clean up iTunes installer files on the computer," then iTunes can be repaired or reinstalled.
    Jason

  • My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

    good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

    Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

  • My itunes won't open! Help!

    My itunes won't open no matter what approach I try. I've tried every way I can think of besides uninstalling and reinstalling it. Any ideas or tips as to why it won't open, or how to open it? Any advice would be much appreciated.

    HI there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • Itunes 10 Installs but won't open - Please Help

    I had Itunes 10 installed working on my computer. I installed a program which also installed an older version of Quicktime which I think was version 6.5. The next time I tried to open Itunes it said I needed verion 7.5 of Quicktime to open Itunes please reinstall Itunes. Now comes the problem. I have installed and uninstalled Itunes about 10 times, everytime it install ok but does not open when I click on the icon. The itunes.exe file opens in task manager for a few seconds then closes. I have searched a few places for solutions with no avail. I have tried the correct order of removing apple programs and deleting temp folder and internet cache. I have tries msconfig but can't find any of the programs which have affected other users. I have tried creati9ng another user account for windows but Itunes still won't open. Can anyone please help. My computer is Windows 7 32 bit. Thank in advance.

    No, the program I installed was Winavi MP4 which coverts video to ipod psp format etc.
    Ack, that one's just as bad. It's been causing this sort of grief for iTunes users for over five years now.
    What it has probably done here is drop old versions of QuickTime componentry in unorthodox locations on the PC (usually down in your operating system files). So we're going to go looking for that.
    First we'll adjust some view settings on the PC.
    1. From the Start menu, click Open.
    2. In the Organize menu, click Folder and Search Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now, in Computer, open your C drive (or whichever drive your operating system is installed on).
    Open the "Windows" folder.
    Open the "System32" folder.
    What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I Downloaded new version of ITunes - won't open now.

    What a fiasco. Everything was working fine until I bit on the message to "update my IPod software". I finally succumbed to that then everything went to (*&(. After the IPOD update, my Itunes would not open my IPOD even though the device manager recognized it. So, I went to Apple support and downloaded the new Itunes. It won't open and my IPod is hosed - file folder with exclamation point. I even tried reloading the Itunes disk I got with the original purchase in 04/2005. Didn't work. I am on my third IPod since 04/2005 and it looks like I may need to send this one in also. But, I need to get Itunes up and running. I would restore my IPod if it was recognized. HELP.
    HP   Windows XP   Home Edition - Version 2002 -Service Pack 2

    top fixes for a new iTunes install/upgrade are
    - turning off security software such as Norton before the install as Apple suggests
    - installing QuickTime standalone, not regular
    http://www.apple.com/quicktime/download/standalone.html
    - setting up Norton to allow iTunes
    - scanning for malware with ewido (Free at www.ewido.net/en/)
    - last but not least, using MSCONFIG to find Windows conflicts
    http://docs.info.apple.com/article.html?artnum=302538

  • New version of itunes won't open on my macbook

    I have just downloaded the new version of itunes and now it won't open on my macbook. Any suggestions?

    What happens when you try to open it?

  • Switched to a new computer - now iTunes won't open

    Hi everyone,
    I did a search and couldn't find relevant/helpful information, so I'm sorry if this has been discussed before.
    I recently purchased a new laptop that came with iTunes 6.0. My old laptop had iTunes 4.7 on it. I ran a program called PC Relocator to transfer all my files/programs/settings, and instead of choosing manual selection, I let it transfer anything and everything it "thought" needed to be transferred.
    Now, iTunes will not open on my new computer. Whenever I try to open it, I get the "iTunes has encountered a problem and needs to close" message. I have tried uninstalling it, reinstalling it, following all troubleshoot tips both on the website as well as in these forums, deleting all installation programs, all registry information - I even tried reinstalling it with the Recovery CD included in my new laptop, all to no avail.
    I would sincerely appreciate any advice or suggestions anyone might have. Thank you all so much!
    Antony Merkel

    hi Antony!
    "iTunes has encountered a problem and needs to close" message. I have tried uninstalling it, reinstalling it, following all troubleshoot tips both on the website as well as in these forums
    hmmm. is itunes currently still installed and giving you that message? if so, let's just check explicitly on the status of your quicktime. is that currently able to launch? if so, what version does it claim to be in your "about" screen?
    love, b

  • New version of iTunes won't open on my iMac

    Newbie here. I checked my version of iTunes and it says it's current with version 10.6.3, of course there is 11.1.0 out now. So I download it. But won't open. Just like the latest Flash update, it downloads but I can't play the videos that  prompted me to download it. Im sure you understand my frustration. Thnaks in advance guys.
    ram

    v10.6.3 Snow Leopard is outdated. You need to update your Mac OS X to v10.6.8
    Installing the combo will bring your software up to date >  Mac OS X 10.6.8 Update Combo v1.1
    Restart your Mac after the combo is installed.
    iTunes should work but you may need to reinstall Flash > Adobe - Install Adobe Flash Player

  • My ITunes won't open! HELP PLEASE

    So I click on the icon, and there's no error message or anything, it just won't open. I have tried all of the troubleshooting on the site, and I've re-downloaded, restarted my computer, everything, I've also tried opening it from the start menu.. what do I do?

    Ps.. My quicktime opens and I can search for music and play it but itunes still wont' open
    thank you kindly.
    another couple of preliminary questions aimed at narrowing in on possible culprits.
    (1) do you have Norton Internet Security 2005 installed on the PC?
    (2) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • Updated to the iOS 7 and now my iTunes Store keeps crashing and won't open please help, Updated to the iOS 7 and now my iTunes Store keeps crashing and won't open please help

    I recently updated the software on my iPhone 5 and now I can't open my iTunes Store and e keypad seems really slow in responding. I have turn my phone in and off but it hasn't solved the issue. Can someone please help!

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • I updated my iTunes to 11.1.4. Error occured! iTunes won't open. Help?

    I am using Windows. I updated my iTunes to 11.1.4 and there was an error. And now I can't open my iTunes. It says that the procedure entry point_except_handler4_common could not be located in the dynamic link library MSVCR80.dll. It also says Error 7 (Windows error 127). Is there something wrong with the update? Please help. I hope you guys can fix this problem. I want my iTunes back

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have downloaded itunes 10 at least 6 times today and the shortcut shows up but it won't open, Please help

    I can't get itunes 10 to open any suggestions?????

    Do you use windows? Try uninstall itunes, restart your computer and then reinstall itunes?

  • My Itunes will not open, please help

    I am running version 10.7.0.21 - since upgrade itunes will not open.  I have visited the support site and done many things to get this working - taken hours of my time I do not have, including setting up a new user and same result.
    My PC is running Windows 7.  I need my itunes as I have 4 ipods and 3 iphones - I need to back up a phone as I have just upgraded,
    One error I seem to have caught is as follows:
    Problem Event Name     BEX
    Application     itunes.exe
    Version     10.7.0.21
    timestamp     504d85d9
    Fault Module Name Quicktime.qts_unloaded
    Fault Module Version     0.0.0.0.
    If someone has some suggestions, it would be much appreciated.

    You're posting in the wrong area. This is the Mac OS X Lion area.
    Post in the iTunes area.

Maybe you are looking for

  • Code 10

    is there any soultion for the code 10 problem i have a ipod nano donøt have any ide what gerration it is i installed itunes and it worked fine now i updated itunes to ver. 7 and my windows can't find the IPod i done every thing in the support page fr

  • Really weird sound problem with rhythmbox[SOLVED]

    Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sou

  • Gestion d'une structure event avec booléens commutés

    Bonjour, J'aimerais avoir votre avis sur la gestion d'une structure event. J'ai en entrée de VI un signal sur lequel j'applique différents traitements (filtre, moyennage, échantillonage). Chaque traitement est commandé par un booléen sur la FA. J'ai

  • OIM Admin Console Customization: Replacing product logo

    Hi, I am not able to find the Global images section in the xlWebApp\WEB-INF\classes\xlWebAdmin.properties file. I would like to change the value of the property called global.image.clientlogo . Does anyone know why the Global images section is missin

  • IProcurement Personalization Copy Category

    Hello, I am looking for a way to copy the category field from a Catalog Request to a Non-Catalog Request. Does anyone know how to do this? Thanks