My new ipad 2 freezes after using the internet for about 15 minutes. It is properly connected to the network and works fine after I re-start it but it is very annoying to have to re-start it every so often. All other laptops on the internet work fine.
My ipad 2 freezes when using the internet. Re-starting the ipad fixes the problem but it is very annoying to have to do this. I have tried all of the trouble shooting suggestions including re-joining the network. All other laptops work fine on my network. I think there is something wrong with my new ipad.
I recommend two things before taking your iPad back to the Apple Store.
1. Fully close safari, by going to your home screen, then double tapping your home button to bring up your most recently used Apps. Using your finger, hold it on any of the used Apps until they jiggle. At this point, you'll see a to the top left of each App. Touch the sign on Safari, which will fully close it.
Then.......
2. Reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data.
If that does not help, then make an appointment at the Apple store to have your iPad checked.
Similar Messages
-
I was playing my iPad 2 I left the room for 5 minutes when I came back it was off and now it won't turn back on
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I pressed the power button to lock my ipod touch,then I go to watch TV. Can I receive facetime calls though locking the screen for 5 minutes or longer?
I hope apple can let the ipod touch's wifi still connected though the screen is locked for a long timeYes,
http://www.tipb.com/2010/06/14/ios-4-feature-ipod-touch-wifi-stays-connected-asl eep-iphone/
B-rock -
i need to know how to get the correct formats or codecs on my iMac so i can play things back.
please help a very confused 40 year old technophobe.Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long. -
I need help because I want to fix it by myself
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/ -
seems like it came with the latest update, which in that case makes it not a great update.. :P
You're welcome
Can you clarify what the culprit was and how you fixed it?
It can help other who read this thread. -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it? -
If I have a new ipad should I use it until the battry runs out and then charge it... or first charge it for how much hours?
saida123456 -
Here is some info on battery/charging for apple products.
~ They normally come 2/3 charged, so you would want to charge it right away if you want a 100% battery.
~ Keep it out of the sun because the sun will take away battery life.
- See link below for a lot of information on Apple products and batery life.
http://www.apple.com/batteries/ipad.html
I will look around for more information on this. -
I have downloaded iOS 7.0.6 but it will not install until the ipad is finished restoring from the Icloud backup. I've been using the mini for about a month, so why is it not completely restored? How do I make the restore process finish?
When and where was the iPad/charger purchased? It's covered by a 1-year warranty.
The problem may be the USB cable.
Cheers, Tom -
How do I get my entire photo stream to my new iPad. I use my ICloud and some of them showed up but most if them did not. I am trying to sync the photos from my phone to an iPad 1 and iPad mini.
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device. -
Brand new New IPad freezes all the time, on everything
I bought a New IPad a little over a month ago, to replace an aged laptop for my wife. Unfortunately the New IPad freezes all the time, about every five minutes, sometimes sooner, sometimes later. It freezes on pretty much everything, Safari, Chrome, even app store. I've tried reset, upgrading to IOS 6, pretty much everything I know off. I checked message usage, which is low, and I constantly make sure there isn't many apps running. But nothing helps. To me it's really a piece of crap. Very very frustrating.
My observation, although not very conclusive, is that everytime it freezes, it's in the middle of network activity.
Once it freezes, home button doesn't work at all, so no way to switch app, or kill an app.
Has anyone experienced the same? it's more likely a hardware issue, such as memory chip problem?
Any idea or suggestion to help, I'll appreciate.Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
I want my new iPad mini to use my new Apple ID, not the old one that pops up without seemingly giving me the choice to update the Apple ID user name; as a result I haven't been able to update my APPS for some time. I changed my apple ID when I got a new e mail address a few months ago .
Any apps you have installed from the old AppleID will always be tied to that AppleID. You have no choice but to enter the password for the old AppleID if you want to update apps downloaded using that ID.
The only way to stop being asked for the password for the old AppleID is to remove all apps from the device that were downloaded using that old AppleID.
You'd then need to re-download (and re-purchase) any apps you want to keep using under the new AppleID.
Apps cannot be transferred between AppleIDs. -
My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.Hi Ursula,
the AGP slot has an extra slot, which is black and about half inch long.
I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start. -
I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
Rosapeas wrote:
I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
I can imagine that is frustrating as heck. My daughter has one of these and I know for a fact hers does not turn off after 10 minutes because I have to turn it off for her every night after she has fallen asleep. Below is what Apple has to say about it from a troubleshooting standpoint.
"If music stops when the iPod nano screen turns off m Make sure the earphone port is free of debris. m Make sure the earphone or headphone connector is pushed in all the way. To see an illustration, go to support.apple.com/kb/ts3700."
Are you using aftermarket ear buds or speakers when you listen to these lectures??? If so maybe it has something to due with a compatibility issue.
Maybe you are looking for
-
ITunes says updating files on my iPod, but podcasts do not show up.
I have an iPod Classic 80g. It is set to manually manage files and disk use is enabled. Recently I had to reformat my PC and reinstall the OS and other programs. Prior to this I was able to click and drag the video podcast I subscribe to directly to
-
How to delete application deployed in Run Application Only mode?
I have exported/imported an application (Run Application Only mode) from one DB instance to another. As a developer, I cannot see the application in Application Builder in the target instance. This is as intended because changes should only be made o
-
Resize in iPhoto? or not?
forget what I may do with it at some future date. Will iPhoto resize or not? If so how? I keep running into advice re: using some other program to do so. simply highlight a pic, get info, resize it intact from 2560x1920 to 640x480 I have attempted va
-
Strategy for mapping existing Java classes to db uing toplink
I have simple POJO, I used the JDev Class Diagram to add relations to the POJO and then tried to map using Toplink to Database. Is this the correct Strategy? or Should I directly use POJOs without the relationsships, to map to DB using TOPLINK?
-
Secondary ip address - using as NTP-Source
Hello, if i configure a secondary ip address on a primary inerface. How can i force some services to use this secondary ip address as source-address. For example, NTP, Tacacs, ... and so on. I am loooking for something similar to ntp source-interface