My new iPad (3rd generation) will not remember wi-fi passwords. It is set up to ask to join networks. It remembers my password at home but forgets all others if it disconnects for more than a few minutes. Frustrating!

My new iPad will not remember passwords.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

HP 3050 will not stay on the wireless network for more than a few minutes at a time.

My HP DeskJet 3050 J610 is constantly dropping the wireless connection. It won't stay on for more than a few minutes. If I power cycle, it comes right back on, but drops again after a few minutes. It will print fine from a USB. When it drops off, pings time out even though the device shows "ready" in Windows 7, Windows XP and OSX. I've done everything HP suggests - static IP, upgraded firmware, diagnostic tools, etc. I am out of options.
I can hit print right now, printer shows as ready, then I will get a print error. If I go over and power cycle the printer, my document will print - most of the time. It will remain on the network for a few minutes, then stop working. As soon as I power cycle it, I get a few more minutes before it drops. It has always done this from day one.

I don't have another wireless network close by that I could test it on. I'm a little isolated. i might be able to work out a time when I could take it by a friend's house, but he's over an hour away.
I have a Win 7 laptop, a Win XP desktop and an old Mac Powerbook as well as an iPod Touch and iPad 3 that use my wireless network without any problems - besides the fact that hardly any of my devices will talk to the other... But that's an OS issue. They all see the network, and the printer after I cycle the power on it.
My wireless router is a Netgear WNR2000. I remember monkeying with the channels when I frist got this printer a few months ago, but I don't remember what all I did. Since I did a firmware update on the router, the channel is now set to Auto. If there's a channel you think I should try, let me know what it is. The printer shows up on the list of devices in the router, but that may be because I have its address reserved for the static IP. Interestingly, the router sees the printer, even though my devices cannot. I did a ping just now while checking that, and got this - which is unusual. Normally they all time out.
Pinging 192.168.1.150 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 192.168.1.150: bytes=32 time=3223ms TTL=255
Request timed out.
Ping statistics for 192.168.1.150:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3223ms, Maximum = 3223ms, Average = 3223ms
Played around a bit more pinging between devices and got this oddity - without a power cycle just a couple minutes later.
ping 192.168.1.150 -n 50 -l 500
Pinging 192.168.1.150 with 500 bytes of data:
Reply from 192.168.1.150: bytes=500 time=527ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=12ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=17ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=13ms TTL=255
Reply from 192.168.1.150: bytes=500 time=21ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=15ms TTL=255
Reply from 192.168.1.150: bytes=500 time=11ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=10ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
Reply from 192.168.1.150: bytes=500 time=19ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=22ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Reply from 192.168.1.150: bytes=500 time=18ms TTL=255
Reply from 192.168.1.150: bytes=500 time=16ms TTL=255
Reply from 192.168.1.150: bytes=500 time=14ms TTL=255
Reply from 192.168.1.150: bytes=500 time=9ms TTL=255
Reply from 192.168.1.150: bytes=500 time=20ms TTL=255
Ping statistics for 192.168.1.150:
    Packets: Sent = 50, Received = 50, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 9ms, Maximum = 527ms, Average = 26ms
Is there a possibility that the printer is going into a standby state and having trouble waking when traffic hits? I don't know if that's possible, just seems like it looking at this.

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

I was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time

i was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time. Help?

Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

Playing music through nano and auto stereo, while traveling...nano is set to shuffle, but if vehicle is stopped for more than a few minutes, nano restarts with same song everytime! How do I make it really shuffle the songs

Having trouble with Nano shuffle while traveling. It's connected to my vehicle stereo and set to shuffle. When I stop the vehicle for more than a few minutes, the music resumes with the same song it always starts with. How can I get it to keep shuffling after restarting the vehicle?

Is the iPod actually doing the music playing? If the iPod is connected using a USB port (on the car audio system) and docking cable, the car audio system is doing music playing. The iPod is just acting as a storage device (like a USB flash drive) with song files. So, in that setup, it does not matter whether the iPod is set to shuffle or not, because the car audio system is playing the songs. Any change to how it plays songs would have to be a setting on the car audio system.

My Ipad (3rd generation) will not back up to iCloud

My iPad (3rd generation) has not backed up since Sept. 14. I have the latest iOS 8.1.3. It starts but ends abruptly. Any suggestions?

Howdy gigi40,
If I understand you correctly you can tap the "Back Up Now" and it appears to start, but it then stops and nothing happens. I would start by quitting the Settings app on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Cheers,
Sterling

New iPad 3rd Generation display not coming on.

I have had this issue twice now and can't find a solution. The first time my display went out I couldn't get any response by holding down the power and home button so I restored it from itunes to factory settings. That did nothing until miraculously a power and home reset somehow brought my Apple logo up and the device was functioning again. A week later now and the same issue has arose. Except this time I haven't been able to get the display back on. I repeated my steps of restoring it from itunes and trying a home and power button reset. The strange thing is that I can plug the ipad into the wall or my computer and it makes the charging ring to let me know I am plugged to a power source about every 15 to 30 seconds. Also if I keep pressing the power button every once in a while I will hear the screen off click noise. Any suggestions on fixes or anyone else having the same issue.
Just to re-iterate I know about holding the power and home button down for 10 seconds to reset the device. That does nothing. You can kind of see the screen turn on a different shade of black every once in a while.
Any help would be great,
Adam

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iPhone5 has terrible Network connection. It rarely works at the normal speed-if ever. I usually get 3G or 1x network dozens of times a day. My phone also gets pretty hot when i try to use any data for more than a few minutes.

My iPhone5 network connection has been terrible for the past week and a half. My phone is no more than a year old so I don't see why it would be a problem with the phone. When I try to use the internet or look for apps or anything like that, anything that uses data really, it takes FOREVER if it even loads! Most of the time it won't even load. My network changes from LTE(which doesn't work well) to 3G(which works even less) and then to 1x(which basically doesn't work at all). This happens dozens of times a day. It's getting quite irritating. I've tried turning my phone off and letting it sit for a while and that does nothing. I'd really prefer NOT to restore my phone. What is the deal??!

Are you broadcasting your SSID? Sometimes this can cause a problem connecting. Is this Cisco router running any turbo modes or special preparatory protocols.
There are no know issues with Wi-Fi connectivity except on first connection; and the chance of 2 devices having the exact same issue is very unlikely. This sounds like something to do with your wireless router.
Have you tried to connect to another Wi-Fi hotspot elsewhere?
Do you have any 2.4 GHz wireless phones or security system that could interfere with connection?

After upgrade to 7.0, crash when left idle for more than a few minutes & if click contact without checking the box first.

I had no serious problems with Firefox until downloading the current version. Since then I've had frequent crashes, usually several times a day, and even with CTL + ALT + Delete I have difficulty closing Firefox down. The crashes happen more frequently when I leave the program idle for, say, 15 minutes or more or when I attempt to open a contact for editing by directly clicking on the contact name, without checking the box first.
My anti-virus software is ESET-NOD.

I get this on firefox. I get this on waterfox. I get this on nightly. I don't get it on chrome. I don't get it on internet explorer. I don't get it on comodo dragon. I don't get it on arora. I don't get it on konqueror...... Anyone noticing a pattern here?
I'm willing to admit that it's probably something to do with my isp server, so Mozilla can feel holier than thou about it, but if that's the way they insist on going, I suggest that the next time they upgrade, they call their browser Canute.

If laptop is inactive for more than a few minutes, Firefox loses its connection and I must restart to get back online. How can I fix this?

This is a recent problem. It was working fine until a couple of weeks ago. If I restart the computer, Firefox gets online with no problem. However, having to do this every time I walk away from my desk is becoming annoying....Is there a way for me to fix this? I am not a techie but I am good at following directions, so any advice would be appreciated. Thanks!

your solution to my question was both helpful and not helpful it was very helpful on my computer which is a windows 7 it allowed me make some adjustment although i am for the most part really good about shutting mine down after i use it there are times that i do leave it on planning getting back to it forgetting or get caught in something else
but unfortunatly it wasn't helpful on the computer i really need to set it up on which is a windows xp home who's power options r already suppose to be set up to shut down the computer if idle for 1 hour but it never does
since posting my question i have gone through any section of help n support on that computer that pertains to it. i have also been into the microsoft support site to try and configure auto logoff n auto poweroff if computer is idle for a while but when i tried to find the files on that computer they said i needed to access to set it up don't exist and of course way at the bottom of the page is operating system this applies to and you click on it and it states for xp professional only and that the support for the xp home in this matter is no longer available on their site

New iPad (3rd Generation) Pre-Order info.

I pre-ordered a new Apple iPad (3rd generation) 64 GB Wifi+4G LTE yesterday on March 6, 2012. The conformation email I received from Apple said that it would be delivered on March 16, 2012. Is this the true date that my new iPad will be delivered, or is this just the date that it will ship from Apple? Does anyone have any insight on this delivery date question?

I was asking the question because the new iPad 3rd generation is not available for sale until March 16, 2012. The delivery date message on the conformation screen wasn't clear as to when it would be delivered, basically stating the delivery estimate. Not that it's a huge concern, it's that I've never pre-ordered anything from Apple before, and since the product itself won't be available to purchase on the market until March 16, I was simply inquiring as to the exact delivery date being the same date the product being available for sale. I know when I ordered my iPad 2 online on the Apple store, it took about 8 business days from the shipping conformation email I received, and the delivery of the iPad 2. Has anyone else pre-ordered the new iPad 3rd generation online from the Apple store, and have an estimated delivery date of March 16, 2012?

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ipad 1st generation will not locate wi-fi networks. i have reset and have done router reseting, still nothing. any suggestions?

my ipad 1st generation will not locate wi-fi networks. i have reset and have done router reseting, still nothing. any suggestions?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Ipod touch 3rd generation will not sync to any computers, help

Ipod touch 3rd generation will not sync to my laptop, tried everything I can think of except getting new usb cable. Does anybody have any suggestions?

Well, even bought the usb cable today and that didn't help. Guy at Best Buy told my son to reset the ipod to the factory settings; so he did and it wiped everything off the ipod and now he still can't get it to hook up to his laptop so no way to get anything back on the ipod. Don't know what to do know. Getting frustrated.

Does the new ipad (3rd generation) has the Siri function?

does the new ipad (3rd generation) has the Siri function? How can I find it in my Ipad?

Not at this Point. When iOS 6 is released, it will be available for the new iPad then ... Coming this fall.

My new iPad (3rd generation) will not remember wi-fi passwords. It is set up to ask to join networks. It remembers my password at home but forgets all others if it disconnects for more than a few minutes. Frustrating!

Similar Messages

Maybe you are looking for