My new iPad has a dead pixel in the middle of the screen. Can I get it replaced?

I've heard that there is a minimum number of dead pixels before apple will replace it. Very frustrating because otherwise the screen is perfect, and it's one of those things you can't stop looking at. What can I do? I don't live near an apple store so I fear that shipping it away is the only option.
Any help is appreciated!

Given that you can return/exchange it for any reason within the 14-day window after you bought it, you shouldn't have any problems.
Do you live near an Apple retail store? That may be your best bet. It certainly worked for me: I ordered mine online and when I noticed an air bubble embedded in the glass, I brought it to my local Apple Store and 15 minutes later walked out with a replacement. No fuss whatsoever.

Similar Messages

  • TS3992 i have the message that the ipad has not been backed up successfully in 2 weeks, but can not get past the message to use the Ipad

    I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else.  What can I do?

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad

  • We just added a new iPad Air to our family of 4 apple devices and I can not get it to join the automatic Photo Share with the other 3 devices. What have I overlooked in set up?

    I added an iPad Air to our family of Apple devices a few weeks back and can not get it to participate in the auto Photo Share with the other 3 devices. My Mac, iPhone and first generation iPad share but the new device does not. ITunes sees all 4 devices but I can not get the new iPad and other 3 to share.
    Any ideas what I may have overlooked in setup? Thanks!

    Welcome to the Apple Community TM7555.
    Settings > iCloud > Photos > On. Photo stream isn't anything to do wither iTunes.

  • I have the same case with you an iPad Air in dead pixel or speckle silver dust on screen.  It is been 3 months I bought in Avant Abenson in Greenbelt Makati Philippines. Today I decided to change my screen protector film but the speckle dust on the screen

    Speckles dust on the screen and it cannot be removed today when I decided to change the screen protector film and noticed is not my fault it is a factory defect on screen it is either dead pixel or speckle dust on screen they are so many said and experience I have read.  So I need the replacement a new one for that dismayed screen on my iPad Air. I bought this 3 months ago in Avant Abenson at Greenbelt Makati Philippines.  I need the replacement for tomorrow I will go to the store I bought.  I love apple products but they need to replace and make go round to improve some defects and cannot be more escalate with this issue of the many of patronizing your products.  It is sometimes irritating to the eyes and seen dirt on the screen.  Thank you apple customer service to bringing up my complaints and a replacement for tomorrow's to inform the store I bought and advise them here in the Philippines to facilitate in regards to this matter. 

    I wanted to buy an ipad air to replace my ipad 2 but the one I wanted was (luckily) sold out.
    Yesterday I tested the air from a collegue and I noticed the screen was SUBSTANTIALLY less sensitive than the screen of my ipad 2 when using my stylus.
    I use Stylus R US especially for I annotate and with the air this did not work well at all... Half of the time there was no contact registered so underying certain parts of the text was a disaster...
    Just working with the finger all whent OK... Just fear that another app I use a lot (notes +) will have same problem.
    On the Ipad 4 also retina all goes *** smooth as on my ipad 2...
    Is this a fault of a specific ipad air series? Or is this normal?? If it is I think this is truelly a huge flaw and I cannot see how not manny people using the ipad for notetaking etc did not notice this...

  • HT3819 my kids got new ipads and I set up an apple id for each; how can I get the songs and apps we have already purchased for them from my apple id onto their new devices

    I understand that home sharing requires all devices to have the same apple id to access music, apps, books, etc.
    However, is there a way for my kids to share songs on separate apple ids so we don't have to buy 3 copies of the same song for our family?

    Turn on computer.
    Open itunes.
    Connect a device.
    Select what you want to sync.
    Sync
    Repeat for the otehr device

  • Iphone has a dead pixel, will apple exchange for a new one?

    I just noticed a dead pixel on the center of iphones display. The pixel is tiny but my eyes keeps fixating on them and its annoying. What should I do?

    They will replace it, they have reserves for replacement that often the manager is the only one aware of. I had the same problem and it drove me NUTS! The manger replaced it with his emergency secret stash. I feel so much better now and my new one is perfect. That one pixel in the middle of the screen was so annoying!

  • Sad iPad 2 Story (Dead Pixel + Bad Case)

    Guys,
    I want to share this experience so that you may not end up like me. I will try to shorten the story, please bear with me.
    Just last 10/25, my iPad 2 arrived, I knew that it had arrived because I was  informed via sms by my mother who received the unit. (Delivered to the house).
    Excited, I bought this case  (http://capdase.com/minisite/ipad/en/...28&c3=28&id=96),  and when I got home, with utmost care, after removing the plastic, I  immediately placed the screen protector then insert the iPad in the  case.
    The next morning, I find my iPad screen a bit warmer in color... I noticed it immediately given the number of iPads I have used at the office, friends and actually this is our second iPad 2.
    After a few days, I now noticed a dead pixel, long story short, I  investigated, tested, and I believe I now have a dead red "sub-pixel". This is less than a week in use.
    I emailed the store where I got this (from a promo) and I reported the screen to be a bit warmer (yellowish) and the dead sub pixel, they told me to bring the unit over so I did.
    They have confirmed a dead red sub-pixel (based on wikipedia and apple) after I demonstrated that a pixel is "black" on red (wallpaper) and not on blue and green. (FYI LCD's are RGB's). They told me a replacement will be ordered in a week's time. I was so happy, because I can't stand a dead subpixel that is on the middle of the screen.
    Today was the 7th day and the same day where I supposedly to surrender my defective unit, to my shock, surprise, they told me the unit have dents! I can't believe what I am hearing! The iPad never left the case from the day it went in there!
    For illustration purposes, this is where they saw two (2) dents.
    (approximate location)
    Because of the dents, they did not replace my unit, I have no choice but to surrender the iPad so that their main office will decide if this is still fit for replacement. OR just live with it (dead pixel) which is not also a choice for me.
    My question is on what occasion did my iPad got the dents... obviously the Capdase case did not do its job. Or I was sold a dead pixel dented iPad 2.
    If you are planning to buy this case, DO NOT BUY IT!!! If you have this case already, sell it! Buy a new one! Preferably cases which protects the entire border.
    I went home today iPad-less. Sad, frustrated, unknown what will be the fate on Monday next week, the day they will tell me congratulations, you will get a new iPad or, Sorry, we cannot accept your dead pixel ed dented iPad 2.
    All this drama, in just 2 weeks and 2 days.
    I hope they will still replace it next week

    I don't know if there will be any iPad repair DIY gurus on this discussion site a  but in case you get no other responses, you might be able to find some help here.
    http://www.ifixit.com/iPad-Parts

  • New 2.4GHz Imac Dead Pixels

    I know dead pixels are always an issue. I purchased a PSP and went through the dead pixel exchange over 12 times. I was lucky to get an iphone with no dead pixels, but now I decided to get my first mac. Since the new iMAC came out I decided to get one. I was going to get the mac mini, but when I saw the imac and the power you get for the price I was hooked.
    Anyway I believe I have a defective screen and I think it is just going to get worse. At first the screen did not have any dead pixels, but after about 3 hours of use the first day I noticed a subpixel suddenly was now black. It looks like it is the green subpixel since that is the only color it cannot display. So I said to myself okay I can deal with one dead subpixel since it is on the dock and just placed photo booth over it and I couldn't see it and would be happy with it. Ignorance is bliss. But now the second day I was using the imac and then suddenly 4 more black pixels came near the top left area of the imac. So that is 5 dead pixels now it two days.
    Has anybody had good experiences with returning their mac with dead pixels on their screen? I hoping 5 or more dead pixels is enough, but wanted to get a feel from the forums if I will be just wasting my time or if there is good chance they will replace my imac. Of course I am worried once I return it I will be going through this 12 times like I did with the PSP. Any thoughts?

    Okay I guess the last 4 were not dead, but stuck because I was showing my fiance the dead pixels and I showed her the one on the dock, which is still black, and then I showed her the 4 at the top left. So we decided to scroll through the desktop wallpaper (I had the default blue wallpaper on when the dead pixels appeared) and suddenly the 4 at the top left area disappeared once I went back to the default blue wallpaper. Not sure if they are going to show up again, but as of right now they are not there anymore. I hope they are gone for good. Maybe I wil get lucky and eventually the one at the bottom on the dock will light up again. I will keep my fingers crossed. So I guess a suggestion to those who may experience what I just did, try chaning your wallpaper and see if that makes the pixels come back and if that doesn't work then you can try those popular pixel fixers.
    I will update if more dead or stuck pixels appear or the others come back. I am now not sure if my screen is considered defective or just a late bloomer. I don't want to be a complainer I just want higher standards when it comes to QOS.
    Message was edited by: MichaelTosh
    Message was edited by: MichaelTosh
    Message was edited by: MichaelTosh

  • I'm downloading a movie to each of my kids new ipads.  it says that it's downloading, but the completion % has shown the same % since it began 2 hours ago.  is this normal? one shows 94%, the other 24%.  how do I know if it's progressing?

    I'm downloading a movie to each of my kids new ipads.  it says that it's downloading, but the completion % has shown the same % since it began 2 hours ago.  is this normal? one shows 94%, the other 24%.  how do I know if it's progressing?

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • TS3682 I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1!  This is what I get for buying an Ipad twice in a week because of a broken scre

    I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1!  This is what I get for buying an Ipad twice in a week because of a broken screen? $500 the first buy and then another $299 plus tax for the swaped out one that I can't restore with my backup data.

    I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
    However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
    Copied from the article that linked you to this discussion ....
    Resolution
    Update your device to the latest version of iOS to be able to restore the backup.

  • My MacBook Pro Retina 2013 has a Dead Pixel

    I just noticed my MacBook Pro Retina has a dead pixel in it. It is black then changes to white when on a black screen. (It's just one) It just came out of no where, and I wanted to know if I was still in Warranty? And if not how mush would it cost to repair it?

    Welcome to Apple Support Communities
    Your Mac is in warranty if you purchased it less than a year ago. In this case, you can try taking the Mac to an Apple Store or reseller to see if they can replace the screen, although I have seen cases in which Apple refused to replace it if there was only one dead pixel. You do not lose anything by trying this.
    Before taking the MacBook, make a backup of your files on an external drive with Time Machine.

  • My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    This shouldn't happen. Take it back since it's new.

  • MacBook Pro w/Retina has moving dead pixel (white)

    I recently purchased a MacBook Pro w/Retina and have an annoying issue that comes up from time to time. Once in a while a bright white pixel will appear in the middle of the screen. It stays put while it is there and I can drag screens around and nothing changes but then suddenly it will go away. After awhile it will popup in a new location and the same thing will happen. Any ideas what this might be? Is it an issue with my screen?

    Anyone reading in 2013/2014 running Mavericks (and worth a try with earlier OS) and having this issue on an external display, I wrote about the deceptively simple solution here: http://forums.macworld.com/index.php?/topic/153791-dead-pixel-or-something-else/
    Basically, in display preferences try moving the menu bar (that small white rectangle on the arrangement screen back and forth...that's it.

  • My four months old retina 15" has a dead pixel

    Hey!
    My four months old macbook pro retina 15" has a dead pixel, clearly visable in the screen, and my question is " does the warranty covers it?"

    Thanks for answering...
    Okey, do I need to go to the shop where I bought it? Or could I go to an apple shop located near me? And how long time does it take for them to replace the screen?
    Best regards,
    Jack H

  • My Ipad got a dead pixel...

    Can Apple change the Ipad for me? the dead pixel is in the center of the screen... very annoying...

    In my case I'm in Russia, alltough I've purchased the Ipad through an authorized reseller. Country's law regulations state that a sale of technologically advanced goods may not be replaced by the seller. Hence, the've sent me to an Apple's Service Center. It's been just a week after I've purchased the Ipad2 and the dead pixcel is in the middle of the screen.

Maybe you are looking for

  • Does QTP/UFT support "Microsoft.Windows.Control" (one type of wpf control)?

    Hello, I have a challenge automating WPF Application in which they used new type of Wpf Data GridControl i.e "Microsoft.Windows.Control". We cannot access all the properties of this control(RowCount,GetCelldata). Can Anyone get this issue and provide

  • EOIO message Split

    Hi Experts,   We have a scenario, File --> Idoc, the QOS is EOIO. now, we have additional requirement that we have to split the message (multiple IDOCs) based on one of the source node's occurance. My doubt is even when the QOS is EOIO and the messag

  • Software installation (MaxQDA) crashes instantly EXC_BAD_ACCESS (SIGSEGV)

    Process:               MAXQDA11 [1060] Path:                  /Applications/MAXQDA11.app/Contents/MacOS/MAXQDA11 Identifier:            de.verbi.MAX11Mac Version:               11.150203 Code Type:             X86-64 (Native) Parent Process:        ?

  • Testing a sql query

    Hi, We have MS SQL 2008 and I am creating a query but what I want to do is actually test a query and not affect any records. I am creating an update query and I want to run it and see how many records will be updated first. So in case there is an err

  • What is Web Dynpro? What is the use?

    Hi all.           I am new in Webdynpro. Can u anybody tell me What is Webdynpro? what is the main Purpose? with regards, Jeyapaul.M