My new Ipad2 is not charging any suggestions?

Thanks I used used my Iphone 4 plug and the ipad2 lead and its now charging Don't get why the plug that came with the Ipad wouldn't work or why it didn't work on my pc
Thanks

Similar Messages

My new iphone5 will not charge,any suggestions

Hello, my new iphone5 will not charge, when I plugged it in to recharge, it was making beeping sounds for about 5 minutes then stopped, any suggestions? thanks

First of all, you'd probably want to move this question out of iPod classic category to iPod touch one.
Try reconnecting your cable. Try connecting to your computer instead of wall socket, or vice versa.
Try resetting, restoring, restoring from backup. Make sure there's nothing wrong with your cable and try another one. The problem might be in your connector or the cable, if so — you might want to ask for a repair in your local Apple Store or Apple Authorised Reseller.

New ipod, battery wont charge - any suggestions?

I have had my ipod for less than 6 months and the battery charged without issue using any sort of charging station but it stopped charging a few days ago. Anyone else have this problem? Any suggestions?

Try the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Battery not charging - any suggestions?

I get an error message when the Notebook is booting up which directs me to HP.COM/go/techcentre/startup, but I've not found anything useful there (yet). Does anyone have any suggestions that might help?

Hi,
Please use the following steps:
Disconnect AC (Charger),
Shutdown the machine,
Remove battery,
Connect AC,
Reboot the machine,
Open Decive Manager,
Under the Batteries category, right-click all of the ACPI Compliant Control Method Batterylistings, and select Uninstall,
Shutdown the machine,
Disconnect AC,
Insert battery,
Connect AC,
Reboot the machime.
and also check this:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01812160
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My new ipad2 does not show any apps

I have turned my new ipad2 on, downloaded itunes, clicked on WiFi, but I get nothing except a diagram showing the itune connection. What am I doing wrong?

You really didn't tell us what you did, but it appears you did not connect your iPad to your computer via the supplied USB cable. If you have the latest version of iTunes, once connected, iTunes walks you through the necessary steps to activate your iPad.

After upgrading to maverick my battery will not charge, any suggestions on how to fix this?

I upgraded to maverick last night and now my MacBook pro won't charge.

One thing to try is Resetting the System Management Controller .

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Brand new iPhone 4, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?

Brand new iPhone 4 (unlocked), got it activated yesterday, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?

There are many threads on this forum regarding speaker not working issues. You might try searching them. Hopefully you'll find the answer you need.
BTW, the iPhone only has ONE speaker.

HT1414 bought a new ipad2 yesterday and charged the battery. When I turn it on the screen displays a picture of a ubs connection with an arrow pointing to an itunes symbal. Have downloaded itunes to a PC and then plugged the ipad into it and nothing cha

I bought a new ipad2 yesterday and charged the battery and then expected to get going with it but the screen only displays an image of a ubs connection with an arrow pointing to a itunes symbol. I downloaded itunes on a PC and plugged in the ipad to it but nothing changed on the PC or ipad. very frustrating. anyone else experience this or have know how or ideas to help me?

Here is my standard reply, some of which may have no relevance to your situation. Start with trying different USB ports, even a numbe of times.
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://support.apple.com/kb/HT1808

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

My macbook pro is not charging - any help please!?

My macbook pro is not charging - any help please!?
<Edited by Host>

Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

My brand new PB will not charge when in standby or when on

I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e. it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

Disk warrior not working - any suggestions?

I recently purchased a mac mini, to keep everything working smoothly I tried installing and running Disk Warrior, it wouldn't work so I called their help desk and was informed that Disk Warrior would not work because of its intel processor and they are currently working on a new version, does anyone have any suggestions for a utility software (one better than first aid) that can be run on a intel machine? Also, I tried drive genius and it's not wanting to cooperate either. thanks.

jharrellb --
Welcome to Apple Discussions !!!
I agree wholeheartedly with Tim.
Wait for Alsoft.
Also, if you could add to your computer specs that you have a
Intel Mac Mini, that would be very helpful to anyone trying to
help you down the road . . . The Intel macs are a whole new
ballgame, and people need to know that up front when responding
to your questions.
Thanks.

The return button on my macbook is not working, any suggestions?

the return button on my macbook is not working, any suggestions?

By the way, if you are still interested, I found a solution. It's a bit crazy, but basically I have insulated the parts of the keyboard connector corresponding to the power button using some thin tape and then used a very thin wire going from the logicboard (where the test pads for startup are located) to my eject key, this way the original power button does not respond anymore and the eject key can be used as the power button, just like in the new Airs
I can provide photos if you want.

My new Ipad2 is not charging any suggestions?

Similar Messages

Maybe you are looking for