My new iPhone 4s will not activate imessage or face time,, it seemed to work and then it stops and will not activate at all now
my new iPhone 4s will not activate imessage or face time,, it seemed to work and then it stops and will not activate at all now
Try following the steps in the following article:
iOS: Troubleshooting FaceTime and iMessage Activation
http://support.apple.com/kb/TS4268
Similar Messages
-
i had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO
It sounds like the LifeProof case may have leaked. Did you pay for the Waterproof protection? If so, you can file a claim with lifeproof, pay the deductable, and get a replacement.
If you didn't purchase the Waterproof guarantee, if you have Applecare Plus, $79.00 will get you a replacement. If you don't have AppleCare Plus, then this is a $269.00 replacement lesson. -
Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.
Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.
-
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?
Found the answer myself. Thanks for the help!
-
Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
Using this article will erase everything on the device, so make sure you have a backup!
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
JW
Message was edited by: jesterwylde -
I have a brand new iphone 4s the service provider loaded my contacts onto the phone I am connected to my computer and have itunes up it wants to set up as a new iphone will I lose my contacts if I say yes?
Yes you will.
-
My iPhone 4 will not find any Bluetooth device not even my ipod touch . When I turn on bluetooth it starts searching and then never stops. It never finds my headset and never stops "searching". I have tried restarting the phone. what to do?
Hi,
You probably need to do this...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
But Try Here First
Frozen or unresponsive iPhone
From Here:
http://www.apple.com/support/iphone/basics/ -
Can you buy iPhone 5 at full price at Apple and then bring it into VZ to activate?
As with many people asking today, I'd like to keep my unlimited plan. No current discussion seems to apply exactly to me so I'm making a new one. Here is a quick summary and then my question:
I'm not an account manager but I pay my share of the bill so the acct. manager doesn't care what I do with my phone. I have an iPhone 4 with unlimited data. I'd like to get an iPhone 5 and keep my data. I don't mind paying full price. I'd much much prefer to order from Apple than VZ's online store. So question: Can I pre-order the iPhone from Apple at full price and take the phone to get switch at a store to make sure it get's switch right or do I have to wait till who knows when till my local VZ store has iPhone 5s in stock?
Edit: Decided to call Apple (VZ's customer service line has a pre-emptive recording about how you shouldn't ask questions like mine to a CS representative. Understandable)
What the Apple guy said was that when you buy from them you have to tie that iPhone to an account, whether it's new or current. What I want to do will only be possible once Apple starts selling "unlocked" iPhones. At this time they don't know when that'll be possible but he was very optimistic in saying soon. I guess I'll have to wait no matter what I choose.maybe not with verizon, a friend of mine preordered well into the day when the iphone 4 came out no problem so you might be able to.. keep in mind most people who have the verizon iphone 4 probably dont have an upgrade before oct 7th since thats 20 months from the first day people got it so the numbers will be slightly down. (of course you have people with multiple lines and people like me who plan on paying full retail)
-
I BOUGHT A NEW IPHONE6 I AM HAVING PROBLEMS CONNECTING TO FACE TIME AND IMESSAGE
i need some help.
i am not able to access face time and imessage from my new iphone 6. took phone to my carrier they said all i needed to do was turned off my imessage from my old phone witch i did, but a message comes everytime i want to access face time and imessage.
message say
an error occurred during activation. try again.
another message
could not sign in. Please check your network connection and try again.
my carrier advised me to call or speak directly to Apple supportWho is your carrier and what country are you in?
-
Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???
Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening after upgrading to IOS 7.
iphone 4S IOS 7.0.3.In your first post you mention you have done a reset and a restore. Those are the last two processes in the user troubleshooting. If those do not work, then the last thing is to go to the Genius Bar. You say you went to Apple and they opened the phone and re-seated the connectors? That sounds unusual, because if there was a hardware issue,they would replace the hardware. You say you cannot get a replacement, is that because you are out of warranty? An out of warranty replacement is only $199 plus tax. It seems to me since you mention the fact you need to press hard to get the screen to react there is something going on with the hardware. If this problem has been going on for over a year, have you been reporting this to Apple. You say you cannot get a replacement and you are on the second phone, I wonder why they are denying you a replacement. Is there something you are not telling us??
-
hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.Anyone have any suggestions? or is everyone else just as clueless as me !
-
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much
Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.
Maybe you are looking for
-
N:1 multimapping for multiple records in every file
Hi , I am merging 2 files into a single file. First file has employee personal data and second file has employee salary data.I have created BPM and used correlation on EmpNumber to merge both the files. In BPM I am using fork step to recieve two file
-
Hi, Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows] 1) Is there a limit on the size of the exe which can be run on it? 2) Will this support additiona
-
Hi, Present we are facing the problem with IPC. While creating orders it telling prodcut configuration is missing. If you go the configuration tab nothing was showing in that. Please guide us. If anyone have IPC cookbook or docuemntation on IPC pleas
-
Hi, Is there a way to get information on a node in a tree. I have a tree and when I click on a node I want to get the node and tree information. Thanks, Marc.
-
Buildinga new image bitmap with transparency:
Hi all, I am wondering if there is a way to paste a transparent image (gif) into a constructed Image without losing its transparency. I came across it as I was trying to build a new Image by pasting a number of transparent images into a 'buffer' imag