My new Iphone 6 is stuck in a infinite restart loop

I just got my new Iphone yesterday and than I wake up the morning after and it's just flashing the apple logo for 20 seconds
and then goes black for 2 seconds It is most disconcerting.

Mine flashed a couple of times and went off and never came back on again, mine was 9 days old take it to your nearest apple shop.

Similar Messages

Accidentally deleted /var/tmp directory and I'm now stuck in an infinite restart loop

So guys, I was poking around and I accidentally deleted that file. I am now stuck in a restart loop that sometimes ends with a white kernel stop sign in front of a black screen. When that happens, I am forced to restart my computer again.
Every time I restart, the loading bar is about 1/5 of the way there when a series of messages show up on the top left of the screen. I took some pictures of the message, and I have inserted it below.
Again, the directory is /var/tmp, and I am not sure if it was /private or not. I'm sorry.
The kind person who fixes this issue will get my undying respect.
Again, thank you guys very much.
I own a 2012 15 inch MBP, if that helps.

In addition to what greg sahli suggests, also issue the commands:
chmod 1777 /var/tmp
chown root:wheel /var/tmp
My commands and greg sahli's suggestions ASSUME that you did not delete other things essential for the normal operation of Mac OS X.
Otherwise you will have to follow mende1's advice and reinstall Mac OS X.

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)

That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).

My new iPhone 5s is stuck in recovery mode

My new iPhone 5s is stuck in recovery mode after I tried to update it from iTunes yesterday. What should I do to get it out of recovery mode?

if you restore the iphone you will have a brand new phone andit will start working normally but you will loose all your information and data on the phone, i have the same problem i dont wan to loose all my pictures, and i called and they told me that if i go to an apple store they will do the same thing i can do from my laptop. im stuck and i need help :/

HT201210 my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night, but it doesn't change. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.

my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.

it says "itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes." I click OK
then I click the restore button
Then the box says "Are you sure you want to restore the iphone to it's factory settings? all of your.....etc." I click Restore and Update
then it goes into software update
at the end of the software update it says "Itunes has detected an iphone in recovery mode...."
All this time, the screen of the iphone stays on with USB to Itunes
I might add that while the phone was in it's first attempt at recovery mode, it was accidentally unplugged.
any suggestions?

Stuck in an Endless Restart Loop

My Mac Pro 8-core running OS 10.5.4 is stuck in an endless restart loop. The problem started when I tried to allow read & write access on my Macintosh HD to another user. Even though I only applied the permission change to my internal hard drive, all my externals suddenly became locked and I could not access them. When going to set permissions on the externals, it was listed as "custom" and I could not alter them. I went to the terminal to try to allow access to the external drives, but the terminal failed to load. That's when I tried restarting my computer and it's now rebooting constantly without ever loading.
What I've tried so far:
-I can't load the OSX install CD because the computer is unresponsive to the open tray command by holding down the mouse click.
-The computer is unresponsive when I try to start in safe mode.
-The computer is unresponsive when I hold down command option O F to force the tray open with firmware.
-I reset the PRAM by pressing command option P R, this is the only keyboard command that has worked so far, but still nothing.
-I unplugged the computer for 10 minutes and plugged it back in. Still nothing.
Any help on what to do next would be appreciated.

I'm having a similar problem.. my early 2008 3Ghz macro when cold starts up the fans rev up and click its off. this repeats for up to five minutes, then i get a chime and then it shuts off. this is repeated for a will as if it is warming up. after about ten minutes it gets as far as finishing booting up and still shuts off. only after about 15 minutes this operating system is stable and does not shut off.
when the computer is fully warmed up it shuts off and restarts fine..
it has recently had a new logic board. can it be the power supply..
please any one got any ideas???

Brand new iphone wont update, stuck in recovery mode

So I just bought a brand new iPhone 5S today, and when I plugged it into iTunes I saw that there was an update for iOS 7.1.2. When I tried to update my phone, iTunes downloaded the update but wouldn't apply it to the phone, instead giving me a "waiting for iPhone" message. After a while I tried reconnecting the phone but iTunes stopped recognizing it and my phone was stuck with the iTunes logo and charger on-screen. I then put my phone in recovery mode - no results. I tried syncing it with another computer, but I can't restore the phone without it also installing 7.1.2, which doesn't work and just gets stuck on "preparing to restore iPhone." Is there anything I can possibly do to make my new phone work again? Did 7.1.2 actually just kill my phone?

Hello rph30,
Thanks for using Apple Support Communities.
First, since your iPhone is not being recognized by iTunes, even though it is in recovery mode, please follow the appropriate link below for the computer you own:
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Then ultimately go through the recovery process:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Take care,
Alex H.

New iphone 5c battery stuck at 50%

I let my new iPhone charge all night and re-started it several times but the battery is still stuck at 50%

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.
If the doesn't work:
http://support.apple.com/kb/HT1414

HT1430 New iPhone 4 shut down and wouldn't restart.

I have a relatively new iPhone, still under the 90 day warranty. Today it just stopped responding. The screen went dark and I couldn't turn it on. I was able to reset it, but was I wondering why it shut down and wouldn't turn back on. Is this a common iPhone issue, or should I have a tech check it over before my warranty expires in two weeks?

hi im new here.. apparently the problem keeps on repeating after turn back on. is there any other solution?

My iphone 4s is stuck on trying to restart. screen is black with apple sign.

my iphone4s is stuck on trying to restart. black screen with apple logo. going on 2 days???

Ignore sandeep. Don't use DFU mode. You need to use recovery mode.
http://support.apple.com/kb/HT1808
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.

Synching new iphone 4s. stuck on backing up. too long (3 hours). should i restart?

The phone is brand new with no data to back up, so i don't know why it's taking so long. it's been at Step 2 of 6 for over 3 hours. has anyone else run into this problem?

I'm been fighting the same issue for the last 2 days using Windows XP.   It cannot get pass the backup step.   I have done the following:
1. Reinstall iTunes to 10.5 (done it twice)
2. Delete all backup files
3. Restore my iPhone ; hold Off button and Home Button for 10 seconds until the Apple Logo disappears.
4. Connect iPhone to the PC with USB cable.
It has been trying to backup for nearly 2+ hours.    I only hav 24 app's, 16 picturs and 2 videos.
Any recommendations?

My iPhone has been stuck in the apple logo loop

I tried to restore the software using iTunes. It came up with the error " The iPhone could not be restored. An unknown error occurred (9). After talking with tech support they said that it was a hardware issue. Does anybody know what component i need to replace?

See: Resolve iOS update and restore errors
There are no user serviceable parts in an iPhone, and no legitimate source for replacement parts, as Apple does not sell them. Thus, any part you buy was scavenged from some other phone and may or may not work. There's also no way to identify which part might need replacing. Most likely it is the logic board, but there's no way to know for sure. Apple will replace the phone for $269 if out of warranty, free if in warranty.

Stuck inside an infinite While Loop :-/

Hi all,
When I write this program using the top-down structural method, it runs fine but when I use the call method inside the while loop, it doesn't test the "if" condition. It becomes a never-ending loop. :-/
import java.util.Random;
public class WhileLoop {
      public static void main(String[] args) {
        int random1;
        Random die1 = new Random();
        random1 = die1.nextInt(6) + 1;
        WhileLoop r = new WhileLoop();
        while (random1 != 5) {
          if (random1 != 5) {
           r.doRandom();
          if (random1 == 5) {
            System.out.println("you win! ");
         int random1;
      public void doRandom() {
         Random die1 = new Random();
         random1 = die1.nextInt(6) + 1;
         System.out.println("random1 = " + random1);
}If I replace the line " r.doRandom(); " with " random1 = die1.nextInt(6) + 1; System.out.println("random1 = " + random1); " the program will check the "if" condition and stops when it finds the number 5. What's wrong with my code?
Thanks for your help.

DrLaszloJamf wrote:
{color:#3D2B1F }You have two, unrelated variables that happen to both be named random1.{color}Opps! Must have missed it. Using two unrelated variables with the same name was, unintentional ~ //yea, right (blush). Thanks for pointing it out. :-)
Encephalopathic wrote:
you never change random1 from within the while loop. You think you do, but it's a different random1 that you're changing, a non-static one that is an instance variable.okay~ but does it mean that 'random1' from the method within the while-loop cannot be used for comparison purpose? I tried using a 'return' value from the doRandom method and use that value inside the "if" condition, but it also does not terminate the loop. The only way it's going to work is by using the solution DrLaszlo gave? Is there any other way to do this by using a call method?
Thanks!

I lost my iphone and got a new iphone,

so how do i get my imessages on my computer to send to the new phone?

HI,
Set up the new iPhone with the Apple ID and then restart Messages on the Mac.
10:48 PM Wednesday; February 6, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Iphone stuck in infinite setup loop

My iphone is stuck in an infinite setup loop. Have reset phone a lot of times and it lets me set up all info. I get home screen for less than 2 seconds and the set up screen pops back up. Randomly the voice over will come on and the tripple tap to enter from kep pad/board comes on or goes off. HELP!

Hello DebiSuzi,
Not being able to use your device can certainly be frustrating. From what I can gather, it sounds like you're having issues restarting your device. After reviewing your post, I have located an article that can help in this situation. You may want to consider restoring your device to factory settings. After this is complete, I would recommend restoring your data from any potential backups you may have:
If you can't update or restore your iPhone, iPad, or iPod touch
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My new Iphone 6 is stuck in a infinite restart loop

Similar Messages

Maybe you are looking for