My new ipod is extremely slow, but i have full strength wifi. Works fast at others homes.

My new ipod touch 4g is extremly slow in my house, but i have full strength wifi. Works fast at others homes. When i try to connect to the internet it gives me a server error. All other ipods and laptops work fine in the home. Does anybody else have this issue?

Have you tried powering off and then back on your router?
You can try:
- Reseting the iPod. Nothing will be lost
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
-Resetting network settings: Settings>General>Reset>Reset Network settings.

Similar Messages

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

    I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

    I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

  • I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications.  Can anyone help?  thanks!

    I just downloaded Yosemite operating system and my computer is extremely slow but also not opening my Adobe applications.  Can anyone help?  thanks!

    First, tell Apple about your problems... with details... and hope for an update that fixes your slowness
    Second, Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
    -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

  • A new ipod has been detected but cannot be identified. [drivers?]

    Yes -that again- the reason I'm making a new post is that this is the second time an ipod hasn't worked with me, I would like to know if there's something I can do to my system or whatever to repair it. Here's the situation.
    - Just so ya know, I use Vista on a laptop [unfortunatley]
    - Previously [as in yesterday] I had an ipod touch, it was stuck in recovery mode and nothing [and I mean nothing] worked to recover it, it wasn't being recognized at all. This problem occured when I installed Itunes 9.
    - Today I bought myself a brand new iPod Nano (5th Gen) for several reasons [not just to do with the itouch breaking, I was sick to death of the thing in general], took it home and connected it. 'A new ipod has been detected but cannot be identified' yadda yadda.
    - I tried everything, I have also downgraded my itunes back to 8, still the same message!! Argh! Here's the thing (that I think might be causing the problem) when I open Device Manager and go to Universal Serial Bus Controllers, there is no apple/ipod recognized. There is a 'USB Mass Storage Device' whch has an error symbol next to it, I've tired updating/reinstalling it etc and it doesn't work ):
    - Is there anything anyone can do? I'm so sick of ipods breaking on me. Just so you guys know, I'm not completley computer savvy so i'll need precise instructions, thanks so much to anyone who can help me.

    This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
    And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
    I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
    Message was edited by: Martha11

  • Okay so I have a new ipod touch...but I need to get music out of my old nano to my itues w/out wiping out my old nano...how do i do this? new laptop so itues is new...please help

    okay so I have a new ipod touch...but I need to get music out of my old nano to my itues w/out wiping out my old nano...how do i do this? new laptop so itues is new...please help

    You need to authorize your new computer in iTunes with the same account that is synced to your nano (and old iTunes)
    In the menu bar click Store >> Authorize This Computer…
    This will allow your purchased music to be re-downloaded from iTunes and played on your new computer.
    If you did not purchase the music through iTunes, you may need a third-party program to get the music off the nano. However, It is much easier (by far) to move your old library from your old computer to the new one if you still have access to the old files. iTunes will not transfer music from your nano to the computer. It is a one-way sync.
    If you still have access to your old files, search google for how to transfer an itunes library, and follow someones instructions. It's not too complicated. You may want to specify mac to pc, pc to mac, mac to mac, or pc to pc, as the instructions will change.

  • Got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

    got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

    What happens when you try to install the iTunes update? Error messages?
    You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem.

  • I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • I was trying to update my ipod to iOs 5 but I have forgotten the backup password

    I was trying to update my ipod to iOs 5 but I have forgotten the backup password help please?

    You need to restore your iPod to factory defaults/new iPod.  That is the only choise.
    Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
    If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
    Above from:
    http://support.apple.com/kb/HT4946

  • My macbook internet download speed is extremely slow. I have tried other computers both windows and mac on the same line and speeds are normal. What is the problem?

    My macbook internet download speed is extremely slow. I have tried 2 other computers, another mac and windows and the download speed is over 10mb but with this macbook pro it is less than 1mb. What is causing this and how to fix?

    To find out how much space you have & what is left, open up Disk Utility/Machintosh HD/First Aid.  The info will be at the bottom of the window.
    Sluggish Finder - Bunch of icons on your desktop?  An overcrowded desktop slows down your Mac.
    Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options:  ensure "Calculate All Sizes" option is unchecked.
    Internet related - It's likely that your broadband connection is the bottleneck.  You can check your speed on http://www.speedtest.net to see how fast your connection is.  If your web browser specifically performs slowly, quit and relaunch it.
       If browser remains sluggish, empty its cache.
    Safari/Empty Cache
    Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
    Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top.  If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance.  Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
    Too little ram - max out your ram.
    Solution may be found if you search in the "More Like This" section over in the right column.

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • IPods screen went black but assisted touch on screen still works?

    IPods screen went black but assisted touch on screen still works?  What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.

    With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
    Could be : The battery
                    The charger
                   The phone itself
    You can narrow these down one by one preferably.
    -If you have an extra battery, test it.
    -Try another charging cable or another outlet
    If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything.  Then restoring it. Time varies.
    If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple.

  • Hello. I have an ipod touch 4th generation. I have been trying to work facetime and imessage for 3 days, i sign in with my user ID and it says signing in and verifying but then it goes back to the sign in page. Can anyone help?

    Hello. I have an ipod touch 4th generation. I have been trying to work facetime and imessage for 3 days, i sign in with my user ID and it says signing in and verifying but then it goes back to the sign in page. Can anyone help?

    I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

  • Loading webpages on Safari has become extremely slow.  I have Mavericks.  Anything I need to be doing?  Thanks.

    Loading webpages on Safari has become extremely slow.  I have Mavericks.  Anything I need to be doing?

      Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up  properly.
      It will take a while.
      Restart the computer.
    Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside  all items.
    Just check the box beside “Remove all website data”.
    Click "Reset".
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

  • My mac mini is incredibly slow, but I have plenty of memory available.  Why?

    Why?My mac mini is incredibly slow, but I have plenty of memory available. My machine has 2.3 GHz Intel Core i5 processor and 2GB 1333 MHz DDR3 for Memory.  Any idea what I can do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • Final Cut Studio 2 and OSX Lion issues

    I tried to upgrade to Lion on my Mid-2009 MacBook Pro, but afterward I tried to startup Final Cut Pro 6 (which is part of FCS 2), only to be told that FCP6 is a PowerPC application and it wouldn't run. I don't understand this, since I have Shake 4.1

  • Failover Zone Creation

    Still at the beginning of the learning curve here.... I am looking to create a Solaris 10 failover zone in my 3.2 Cluster. I see documents claiming both ways that the zone can or cannot have its zonepath on a globally shared file system. So, do I Cre

  • Is the iPhone 5 lightning cable also covered under AppleCare?

    My iPhone lightning cable is starting to fall apart. I never take it anywhere. It just stays plugged in at home and all I use it for is connecting to my iPhone 5 for charging, etc. So it's definitely never been abused. It came with my iPhone 5 which

  • Phone Update not working in windows phone 10 technical preview

    I recently upgraded my lumia 920 from windows 8.1 to windows 10. Now whenever I hit 'check for updates', it indefinitely stays there as if it's checking but it doesn't. I'm kinda worried that if any new windows 10 updates come, will I ever be able to

  • Hide iView when no contents available.

    Hi All, I have an iView which has certain contents from the KM. The iView is a JSP Dynpage portal application  which reads the KM and shows some links.(for eg. docs, ecternal links, etc.) The requirement is such that if no content is available in the