My new ipod will sync up to wi-fi. i have reset the networks.. i have a new at

  ok my new ipod will not sync up with my at&t u-verse wireless router...I have turn on and off the the wi-fi and i just spins searching for connection... nothing happens.. i have also reset the networks and that doesnt work...this router works for my daughter mac laptop, her i phone 4. my and my husband i phone work.   mine is slow alot but it does connect to the internet...my i pod does NOTHING.....help i would love to use my ipod

Try here:
iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • Ipod will sync up once then says cannot read or write to disk.

    Is this normal? The IPOD shows up in Itunes after the first sync but when I go and try to update the ipod again it says it cannot read or write to disk. Tech support says this is normal but it does not make any sense as the IPOD still shows up in Itunes.

    the IPOd will sync up when I fiorst plug it in. the problem is when it is finished, Itunes says ipod update complete you can disconnect. I leave it connected, and if I try to update the ipod again after I download something or whatever into Itunes it comes back with the cannot read from or write to disk. I can unplug it and plug it back in and it work sfine. There is something with the software I guess that is not staying connected with the hardware after the first sync.

  • 2nd Gen Ipod will sync with itunes but will not download new song

    My Ipod will sync with itunes but will not download newly purchased songs.  It is Ipod nano 2nd gen.

    If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes.  If the new songs are not included in what gets synced to the iPod, they will not sync.
    If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  The iPod appears in the sidebar, under DEVICES.  Select it there, to show its Summary screen to the right.  Toward the top, there is a bar of buttons, starting with Summary.  Click on Music next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
    NOTE:  If Sync Music is not already checked, that means the iPod is currently set to Manually manage music.  Setting up automatic syncing will replace the iPod existing content.  If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
    If your iTunes library fits on the iPod, you can choose the option to sync Entire music library.  Otherwise, choose the option to sync Selected playlists, artists, albums, and genres.  Below that, select (checkmark) what you want to sync to the iPod from the lists.
    One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod.  Or you can use existing playlists.  Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
    When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content).  Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs).  If you have new songs, add them to a playlist that is synced to the iPod.  The iPod does not need to be connected.  The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

  • IPod will sync but takes nothing on

    iPod will sync but phtos, apps, music etc. wont. All the right boxes appear to be ticked. I have tried a million things but so far the undoutedly obvious solution evades me. iTunes does my head in.

    Okay, I believe I have found a reliable fix.
    There is pain involved, however
    On a Mac, one can hold down "Option" and click on the iTunes icon to bring up a dialog box allowing the user to choose a new library or to create a new library. I created a new library in a different location than my original and was then able to use iTunes's "Add to Library" option under the File menu to recover my purchases. Unfortunately I lost all of my metadata, including play counts, but I am now able to sync my iPod once again.
    It looks to me as though the upgrade to iTunes 10.5 corrupted part of the library database in a way that isn't recoverable. Creating a new library and starting over seems to be the fix.
    I hope this works for you. According to this Apple support doc (http://support.apple.com/kb/HT1589) if you're on Windows, launching iTunes while holding down <shift> accomplishes the same thing as the  <option> trick I used on my Mac.
    Best of luck!

  • I can not get my ipod touch to sync to my laptop.  The people at the apple can no solve my problem.  My ipod will sync to other mac's or laptop.  I can sync my ipad with laptop.

    I can not get my ipod touch to sync to my laptop.  The people at the apple can not solve my problem.  My ipod will sync with other mac's or pc.
    My ipad will sync with my laptop.

    You can only sync with one iTunes library/computer. To switch:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?

    My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
    New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.

    If you want to just extract the playlists from your iPod, plug it in iTunes.  When it appears under devices, right->click on it and choose Export Playlists.  Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How do i find out if my ipod will sync with cloud

    how do i find out if my ipod will sync with cloud

    An iPod Classic cannot sync with the Cloud. It can only sync with your computer as it has no WiFi capabilities. iCloud and devices was built for the iPod Touch, iPhone, and iPad.

  • My iPod will charge in the computer but not my iPod dock, my sisters iPod dock or the wall charger. My sisters iPod will charge in all and we both have the same sofware and generation. Why won't mine charge?

    My Ipod will charge in the computer but noy my iPod dock, my sisters iPod dock or the wall charger. My sisters iPod will charge in all and we both have the same software and generation. Why won't mine charge?

    Look the dock connector on your iPod. Look for abnormalities like bent or corred contacts, foreign material and cracked/broken plastic.
    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears..
    - Restore from backup
    - Restore to factory settings/new iPod

  • TS1398 my 3rd generation ipod touch recently lost wifi capabilities. I reset the network settings... this did not help.  I did a complete reset, I now no longer have the Safari icon on my itouch.  Has Apple removed wifi on older models to force new purcha

    I recently lost wifi capabilities on my 3rd generation ipod touch.  I reset the network which did nothing so I did a complete reset.  This actually removed the Safari icon off my itouch and still wifi is completely grayed-out.  Has Apple removed the wifi capabilities to force the purchase of new items?
    I find it completely disturbing that only recently has this become an issue for 3rd generation itouch users.
    Can someone please help as I am exceptionally frustrated

    This problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • I get the message "IPod is synced with another library"  I only have one Library acount.  Nothing I have purchsed shows up.

    When I open up my I Tunes account with my IPod plugged into the computer, I get the message"  IPod is synced with another library"  I only have one Library.  None of the music or Apps that I have purchased shows up.

    sorry...I am computer illiterate....not sure what you were asking!

  • My ipod touch (4th) suddenly wont connect to my wifi. Other gadgets are connected though. I tried resetting the network and turning the wifi (and ipod) on and off but it still wont work. Any suggestions on what to do?

    My ipod touch (4th) suddenly wont connect to my wifi. It connected fine before and all of my other electronics (tablets, computers, laptops, gaming systems, etc.) are connected and working completely fine. I tried turning the wifi setting on my ipod on/off as well as the actual ipod itself. I also tried resetting the network settings but neither of these options worked. Any suggestions on what I should do?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch wont connect to wifi after i reset the network settings

    my ipod touch wont connect to wifi after i reset the network settings

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    If not:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Open po report

    Hi, I need to take a open PO report in excel format. By using ME2m i have selected the scope of parameters showing as BEST and selection parameter WE101. But while transferinf to excel sheet it coming in text format How to take a report for open Po a

  • Trouble with iPhone OS 3.1.2 Software Update

    I've tried to download and install this update at least a half dozen times in the past week. Each time the download fails and I get the error message that my network connection has timed out. There is no problem with my network connection, which work

  • Can I sync my Lotus Organizer 6 (XP PC) with the iPod touch?

    I wish to purchase the iPod touch and would like to use my Lotus Organizer 6.0 on my PC (Windows XP Pro) as my work calendar as I have been using it for many years.  Will the PC sync with the iPod so that calendar and address information can be excha

  • [solved] Get chinese character to display in urxvt

    Hey guys, I'm running urxvt (specifically, rxvt-unicode-256xresources from the AUR), and I'm having trouble getting about half of the chinese characters to display.  For example, the character 刘 shows up as a box.  In my .Xresources, I have URxvt*.fo

  • Creating an html file in XI using an xsl stylesheet  -- two error types

    Hi I am working on mapping an xml invoice to an html-file using a stylesheet  (xsl-file)  in the message mapping in XI 3.0. Thus the inbound message is an xCBL Invoice and the output message is to be an html file. I name the output file "%supplierid%