My new iPod won't sync unless I have iTunes 10.7 or later, but there is no such version.  iTunes 10.6 is the latest.  What's going on?

I plugged in my new iPod and a message said that it would not sync unless I have iTunes 10.7 or later, but there is no such version.  I checked for updates and iTunes 10.6 is the latest.  What's going on?

You need to upgrade the computer's OS to at least Mac OS X 10.6.8, which requires an Intel Mac with at least 1GB of RAM.
(81105)

Similar Messages

  • HT1338 my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.

    my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.  I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod.  The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.

    Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder.  If that doesn't help, try a low level reformat of the drive using the same application.  Make sure you choose Mac OS X Extended (Journaled) as the file system format.
    B-rock

  • My new IPOD won't sync, the error says I do not have enough space but at the bottom it shows I have extra space....help

    My new IPOD  won't snyc, the error message says I do not have enough space but ir shows at the bottom of the screen and on the main page that I have pleanty of space. Help!

    It appears that you are trying to sync too much media to the iPod. Check your checkmarks. Also see:
    How to sync music to your iPod when your library is bigger than your iPod storage space
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    or
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

  • My Ipod won't sync.  I am not sure why.  Normally, it works right away soon as I plug it into the computer.  Now, I plug it in and nothing happens.  Any advice?

    My Ipod won't sync when I plug it into the computer.  What is wrong?

    Hi,
    See this Link for Device not Recognised:
    http://www.apple.com/support/ipod/
    This could be Helpful too:
    AMDS for Windows
    http://support.apple.com/kb/TS1567
    General Support Link:
    http://www.apple.com/support/ipod/
    Cheers,

  • My new ipod won't sync with itunes and does not show on windows

    Hi
    I got a new ipod nano gen 7 to replace 2 old ipods that were stolen.  the problem is that it won't sync at all.  When I plug it in it charges, but my windows 7 browser doesn't see it, and neither does my itunes.  I have Mcafee security and I have updated itunes, windows and checked my mcafee settings as per other users issues on the web and it still isn't working!  If I plug it into another computer though it works fine.
    Have tried - resetting ipod, downloading upgrades, switching firewall off.
    No idea what else i can do!
    Help!

    Hi I am having the same problem and I saw that u fixed it on your own...how?

  • New iPod won't sync new files

    I'm back again... so I'm the one who ruined the iPod with the perfume. I bought a brand new 120 GB classic to replace the other one and all my music from the old iPod transferred fine.... I bought a new album from iTunes since and it won't sync it to my iPod! What am I doing wrong?
    Thanks!

    how did you save the songs? can you play the songs? have you restarted the computer?

  • New ipod won't sync purchased music from itunes library

    I just purchased a new ipod and when I try to sync my library it will not transfer any purchased songs that are in my library.  All the songs are checked and I selected sync all music.

    Do these purchased tracks play in iTunes?  What other options do you have enabled from under the Summary and Music tabs for your iPod?  Are you saying non-iTunes purchased tracks sync okay?
    B-rock

  • New iPod won't sync

    hey everyone, I really need some help. I just bought a 30GB iPod. I'm trying to sync it with my current iTunes account but it won't sync. It will start to download, then just freeze up and I'll get an "iPod can't be synced, couldn't find specified file" window. When I try to restore to factory settings, it won't go through and I get an Error 1418 window. If it makes any difference, my iTunes is 7.2.035 and I also have a 1st gen iPod Nano 2GB which syncs and works just fine.

    Is the iPod charged? Try a different USB port? Call Apple?
    Clone PC, 1st Gen iPod Shuffle (v 1.1.5 software)   Windows XP  

  • New iPod won't connect to internet, it shows as trying to connect but nothing happens

    I have a brand new ipod touch 8gb and it found my network, I put in the password, but it won't connect. 
    Also won't give me the option to reenter password.
    The icon of the wheel spinning keeps spinning.
    what to do?

    go to settings->general->reset ->reset network settings and press yes
    at the same time turn off your router and after a minute turn it on
    ussually this solves the problem
    i hope i could help

  • Ipod won't sync because I have 10.2 (but I have 10.3!)

    I try to install the update because after sync it says the ipod hasn't synced all the songs in itunes because "my software is too old". So I download the ipod updater and there is a red exclamation mark on the ipod in the update window and the dialogue box says 'this update requires Mac OS 10.2.8 or higher' Um, I have 10.3.9 for heaven's sake. Any suggestions folks?
    Spencer

    and there is a red exclamation mark on the ipod in the update window
    You can't install the iPod updater directly onto the iPod. To install the iPod updater, click on your hard disk in the update window and proceed with the installation. When the installation is complete, open the /Applications/Utilities/ folder and then locate the iPod updater you installed. Double-click the updater and then either click the Update button, or click on the Options menu and choose Update iPod to continue the update.
    (9222)

  • HT2693 New Ipod accidentally locked with unknown passcode - have tried restore thru I Tunes but nothing will unlock or cancel passcode - any suggestions?

    New Ipod was accidentally locked with an unknown passcode - have tried restore process in I Tunes but still cannot unlock passcode - any suggestions?

    You'll need to put it in dfu recovery mode, then do a restore.  That will set it back to it's "out of the box" condition, without a password, then you can sync with iTunes...Here is an article that describes the process...
    http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/

  • My new ipod won't sync with my computer

    I replaced my Ipod Nano.  My computer won't recognize it, so I can't sync

    Hello bustera,
    Welcome to Apple Support Communities.
    The article below provides troubleshooting tips that’ll resolve most issues like the one that you’ve described, where your replacement iPod nano isn’t recognized by iTunes on your computer.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    So long,
    -Jason

  • New ipod won't sync with itunes library

    i have updated all my software and my ipod is fully charged. it won't bring up the summary tabs and shows the page asking me to register my ipod but it won't show anything but the 'register later' button which then closes my ipod. it won't let me register or move past it. please help.

    Hi I am having the same problem and I saw that u fixed it on your own...how?

  • IPod won´t sync purchased iTunes from iMac

    My new iPod won´t download items I have purchased from iTunes onto my iMac.  The message states that my computer is not authorised but it is!  Can anyone help? 

    Play one of the purchased songs in iTunes to authorize your computer.

  • New computer, ipod won't sync

    My old iBook's hard drive had some water damage, so I got a new MacBook. But now my ipod won't sync with my new computer unless I erase what I already have on my ipod. How do I get all my non-purchases off my ipod before reformatting to my new computer?
    MacBook   Mac OS X (10.4.9)  

    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    Senuti Mac Only
    PodView Mac Only
    PodWorks Mac Only
    iPodDisk PPC Mac Only (experimental version available for Intel Macs)
    iPodRip Mac & Windows
    YamiPod Mac & Windows
    Music Rescue Mac & Windows
    iPodCopy Mac & Windows
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would , relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

Maybe you are looking for

  • Value from CFC using cfscript

    I've got a function in a CFC that inserts a parent value into an Oracle table (see below). I want to extend the function to return the new parent ID so that I can use it to insert the child values. I'm using <cfscript> to execute the function which w

  • Whiteboard, Polls, Q&A and Powerpoint not working over Federation

    Hi, I have a problem with whiteboard, polls, Q&A and Powerpoint sharing over federation, if the federated endpoint is behind a web proxy with HTTPS inspection enabled. Audio, video and desktop sharing works fine. Scenario: 2 Domains which are federat

  • How to insert into a table with a nested table which refer to another table

    Hello everybody, As the title of this thread might not be very understandable, I'm going to explain it : In a context of a library, I have an object table about Book, and an object table about Subscriber. In the table Subscriber, I have a nested tabl

  • Double target qty in cost analysis

    In one of plant for particular order type, system always saw target qty as double. Example; confirm qty is 100 kg then system saws target qty as 200 kg in cost analysis of COR3 screen. Actual qty coming correct. Even when I'm checking goods movement

  • Problems with Tru64 UNIX 5.1b PCI-GPIB driver developmen​t

    I am using your NI488.DDK product to develop a PCI-GPIB device driver for Tru64 UNIX 5.1b3. I have experience porting other device driver from 4.x to 5.1b and thought that this would not be too hard.  The driver that I have developed loads and config