My new K7N2-Delta need some help here!
Recently i bought a brand new k7n2 delta L and i need some advice on how to overclock with this new mobo, with the km2m it was piece of cake but this is a little bit more complete. I will appreciate the help and tips in this matter more over because my first attempt resulted on a non responsive system :P no post to be more clear.
Thanks in advance.
By the way my cpu is an athlon xp 2000+ tbred (i don't know if it is unlocked)
read all this first
https://forum-en.msi.com/index.php?threadid=40413&sid=
https://forum-en.msi.com/index.php?threadid=32088&sid=
https://forum-en.msi.com/index.php?threadid=38822&sid=
Similar Messages
-
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200
What are the existing settings iMovie?
Al -
Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.
You should contact Microsoft for Mac Support and/or post in their forums.
-
Need Some Help Here From The Pros....
Hi all...Im new here you see. I have some questions here..
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
Please help....Hi!
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
With your external drive attached, open Disk Utility, found in Applications/Utilities. Choose your drive on the left, and use the Partition tab to set up the number and type of partitions. Partitioning will delete all data on the drive.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
Don't forget that the Mac, just like Windows, is multi-user. You can set up a user for yourself and one for guests or specific people. Nobody can see anybody else's files. You can lock your computer when you go away from the desk if you want absolute privacy.
Or, you can create an encrypted disk image (also using Disk Utility) to store private files if you really want to stick with one user account.
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
Do you mean VMWare Fusion? I believe iSight support is included in the VMWare Tools - when you're running Fusion, there's a menu option to install/update those tools.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
I believe it's Mac only, so you should check the Windows specs (RAM requirements, graphic card VRAM, etc) to see if you can run it within a virtual Windows on your Macbook.
Matt -
Hello, I am a new user of Flex 4 and have recently gone thru the training courses available here (Flex in a week). I have been tasked with moving some of our firm's webpages that use jsp and spring to connect to a mysql database to a flex frontend.
I've been looking over the BlazeDS tutorial (http://www.adobe.com/devnet/flex/articles/spring_blazeds_testdrive.html) and it seems rather helpful, but I could use some help in how to make a connection to a mysql database on an external server-- where does the connection info go, user name, password, etc.
In a nutshell, the application I am to design would need to be able to go out to a database to first verify user credentials, then to upload csv files and store the data into a database, and finally allow users to retrieve the data in datagirds and display in basic bar charts. Thanks to the training, I have a good understanding on using the datagrid, but the connecting to an external database is where I'm having trouble.
Also, I have seen a flex webpage where data is displayed in a chart and the user can export the chart as a jpg or export the input data to a csv file. Is anyone familiar with this capability?
Thanks for your help-- I am excited to learn all there is to know about Flex!I would you should read the following link completely.
http://www.adobe.com/devnet/flex/articles/flex_hibernate.html
You need to create an Client/Server-application with 3-tiers client, application server (Java/Hibernate/Spring) and database server (MySQL for example).
Just buy a book over Flex and Java and read it. -
One song stops after a few seconds on a new ipod touch, need some help
So I just got a 16gb iPod Touch as a gift and it works fine, all my songs play fine except for one of my songs that stops after like 7 seconds of playing. If I have it on repeat it will keep doing the same thing but if I forward the song a bit it will play fine till the end. Now this song plays fine on my PC, and it has played fine on my previous iPod video. Any one have any idea on why this is happening? It's kinda scaring me since I don't have the receipt for this iPod Touch and thats one of my favorite songs.
I had the same problem with one particular track I downloaded off Limewire earlier today and I've downloaded lotsa stuff on there over the years. I guess I'm fortunate compared to some of you with like 10 songs affected.
Anyways a little troubleshooting helps here. First off, it shouldn't be happening with any track downloaded off iTunes. Those are clean as a whistle in my experiences although iPod touch had some bug issues with songs stopping few seconds into them when they first came out last year. That problem appears to have been rectified unless you guys haven't done an update lately on your units.
So if you're downloading off Limewire or some other peer-to-peer service, you're probably getting a corrupted file that is causing this problem. I tried a couple different file downloads of the same song from different users and parameters until I found one that finally worked. It is true that a corrupted file will play on the older iPods because in my case it did on my 80GB and on my computer. It's only iPod touch that appears finicky about what it wants to play.
This is most likely therefore not a bug specific issue with Apple that you can rely on fix. You guys are probably gonna have to find new source files for your affected songs until you get one that works. Pain in the arse no doubt but the only real solution.
Cheers! -
Hi,
I am new to xMII and need some material in regards to this.
You can mail me at <b><<Removed>></b>
<b>Message was edited by:
Abesh Bhattacharjee
READ before you POST. Yep that's the name of the first thread on this forum ! Do it ! Never ever post your email id on this forum.
</b>Hi,
Please dont provide your personal email id for any reply. That will not help other members looking for similar help.
Check these links for a good start.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7c79bd4-0a01-0010-4caf-bfb68ab98517">xMII Getting Started Guide</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f43a39-be98-2910-9d9c-a59785f44e41">xMII Best Practices Guide</a>
U can find many more materials in SDN itself. Search for 'xMII'. That will also provide many tutorials.
Regards,
Harini S -
GS60 2PE Hopeless really need some help here!!!
Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_TQuote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right? -
VOICE over UDP need some help here
I have attached a vi i have been working on and i am having a litte trouble. I want to do somethink like voice over ip. Currently i have a setup that broadcasts the data to a client. The mic is sent over udp to the clients speakers and vice versa. I ingore anything that comes from one's one ip address. This works just great, but the problem is i need more than 2 on at a time. I dont want to mess with entering specific ip address ect. At most i only want to have to enter ones own ip address as i have in the example.
When i start running 3 of these vi's on separate machines, i can probe the address which the data is being received, and it seems to only get data from one address, not two like i would expect. Is there a buffer being cleared when read or something? Any help would be appreciated.
Thanks
Dave
Attachments:
UDPVOICE.vi 70 KBHere is how I have dealt with the port problem in the past (albeit, not
in labview, but lets hope LabView's usage of UDP is consistent with
other programming languages ) is you always have clients connect to
a listen port on the server. You will have a thread watching for
incoming connections on that port. When one is detected, you
create a new "personalized" connection for that client to use to
communicate with the server. Part of this process involves
assigning that conenction a new port. This assignment is
dynamic--the server just assigns some random available port (so in
other words, you don't have to hard code one in).
So once a client connects, the server responds from the new port, the
client receives that datagram and checks where it came from (address
and port) and sends all future messages to that port on the server.
Does this make sense? I'm afraid I won't be much help with
anything aside from theory as I haven't actually played with the
network functionality in labview--all my network programming comes from
C and Java.
As to combining the sounds, I'm afraid I don't know. I think the
simplest system would be a half-duplex system whereby clients can only
send data when they are not receiving it (or rather, 1 person talks at
a time). I can understand how this isn't ideal. I wonder
how this is accomplished in other, similar voice-chat programs?
One final thought: I'm not sure, but I'd be willing to make a wild stab
in the dark and say you might run into bandwidth problems if you're
transmitting an unencoded (uncompressed) voice signal. This is
undoubtably more complex than you want to get, but you might look
around for ways to reduce the amount of bandwidth you're going to
use. And if you'd like examples of programs that will allow this
kind of chat go check out Teamspeak (http://www.teamspeak.org/) or
Skype (http://www.skype.com/). Both these programs allow
multiuser voice chat (teamspeak is intended for chatting with your team
in video games). Skype is a very professional, very high quality
voice chat program that works more or less the same, with higher
quality voice. Oh and both are free
--R -
Hey Guys, I need some help here
Im doing some create view and create procedures for my work.
In creating view, its just done perfectly.
However with create procedures work, I got some problem with the result.
So here is the coding:
create or replace
PROCEDURE "USP_EDW_CASH_MARGIN"
result_cursor OUT TYPES.cursor_type
AS
CURSOR v_cursor IS
SELECT
to_char (CM100,'99999999999999.99'),
to_char (CM101,'99999999999999.99'),
to_char (CM200,'99999999999999.99'),
to_char (CM300,'99999999999999.99'),
to_char (CM301,'99999999999999.99'),
to_char (CM310,'99999999999999.99'),
to_char (CM320,'99999999999999.99'),
to_char (CM400,'99999999999999.99'),
to_char (CM401,'99999999999999.99'),
to_char (CM402,'99999999999999.99'),
to_char (CM500,'99999999999999.99'),
to_char (CM720,'99999999999999.99'),
to_char (CM730,'99999999999999.99'),
to_char (CM740,'99999999999999.99'),
to_char (CM999,'99999999999999.99')
FROM VW_CASH_MARGIN a;
v_id varchar2(100);
v_row varchar2(4000);
v_clob CLOB;
v_buffer varchar2(10000);
BEGIN
v_id := 'EDW_CASH_MARGIN';
DELETE FROM TBL_INTERFACE_DATA WHERE cd = v_id;
INSERT INTO TBL_INTERFACE_DATA (CD,INT_DATA,DT_CREATED)
VALUES (v_id,EMPTY_CLOB(),(SELECT CURR_PROC_DATE FROM TBL_PROC_DATE));
SELECT INT_DATA INTO v_clob
FROM TBL_INTERFACE_DATA
WHERE CD = v_id
FOR UPDATE;
OPEN v_cursor;
v_buffer := '';
dbms_output.put_line(LENGTH(v_buffer));
LOOP
FETCH v_cursor INTO v_row;
EXIT WHEN v_cursor%NOTFOUND;
if (length(v_buffer) + length(v_row)) < 10000 or v_buffer is null then
v_buffer := v_buffer || v_row;
else
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer), v_buffer);
v_buffer := v_row;
end if;
END LOOP;
if LENGTH(v_buffer) > 0 then
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer)-1, v_buffer);
end if;
CLOSE v_cursor;
OPEN result_cursor FOR
SELECT 'success' AS status FROM dual;
END;
After i run this coding.
I got these errors :
1)Error(46,5): PL/SQL: SQL Statement ignored.
2)Error(46,5): PLS-00394: wrong number of values in the INTO list of a FETCH statement
It says that the error is with this code "FETCH v_cursor INTO v_row;"
Can someone please help me.ok let me explain with emp table.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_name);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into one variable.
So i'm getting error like this
ORA-06550: line 7, column 1:
PLS-00394: wrong number of values in the INTO list of a FETCH statement
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
v_sal NUMBER(10);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename,v_sal;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_ename||v_sal);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into two different variables.so no error.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_row c%rowtype; -->record type declaration
BEGIN
OPEN c;
LOOP
FETCH c INTO v_row;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_row.ename||v_row.sal);---> Here i'm mentioning which column to be printed
END LOOP;
CLOSE c;
END;Same thing i'm getting all columns variable into the records so no error.
and also pls read this
How to ask question
SQL and PL/SQL FAQ -
hi, ^-^, i was programming the Caesar encription method, this one:
import java.io.*;
public class lol {
public static void main (String args[]) throws Exception{
int seleccion, longi, w, x, y, z;
String sel, texto, encrip="";
boolean a=false, b=false;
System.out.print("Enter a text to encript: ");
DataInputStream entrada3 = new DataInputStream(System.in);
texto = entrada3.readLine();
w=1;
z=0;
for(x=1;x==texto.length();x++){
if(texto.substring(z,w)!= (" ")){
encrip = encrip + texto.substring(z,w);
z++;
w++;
} else{
z++;
w++;
w=1;
z=0;
if ((encrip.length()/2)==0){
longi = ((encrip.length()^(1/2))+1);
} else{
longi = ((encrip.length()^(1/2)));
String crip[][] = new String[longi][longi];
texto = "";
for(x=0;x==longi;x++){
for(y=0;y==longi;y++){
crip[y][x]=(encrip.substring(z,w));
w++;
z++;
for(x=0;x==longi;x++){
for(Y=0;y==longi;y++){
texto=texto+crip[x][y];
System.out.println("your ecripted text is: " + texto);
all it do, is: read the text, decompose it, so it dosnt have any spaces, and then, it create an array whit the dimension of the text^1/2 +1 if the text/2==true or the other writted there; then it fills the array (0.0, 1.0, 2.0....,0.1,1.1,...etc), and then it show u the encripted text. My problem here its that the program dosnt go trought any "for bucle" O_o, dunno why.. any help would be apriciated, thx
Message was edited by:
[email protected]I'm sorry but my Babel fish isn't working. bucle == loop (like English buckle, I guess)
@OP:
The second part of a for-loops (bucle) is a condition that must be true.
So you should write//for(x=1;x == texto.length(); x++) { //<-- not this
for(x=1;x < texto.length() + 1; x++) {
// etc
}and the same for the other loops.
Strings are compared using the equals() method, not ==. So//if(texto.substring(z,w)!= (" ")){ // <-- not this
if(!texto.substring(z,w).equals(" ")) {
// etc
}Exponentiation (potencia) in Java does not use the ^ operator, you have
to use Math.pow()//longi = ((encrip.length()^(1/2))); // <-- not this
longi = Math.round(Math.pow((double)encrip.length(), 0.5));longi will be a long, not an int (but can be used the same way in your
code). -
i am working on a website thats going to be a friend loop
such as facebook myspace classmate etc. im in the proccess of
making the site now and i was wondering what i need to to to enable
useres to be able to login and create a profile page on my site?
how can i do this using DW2004 what am i looking at here? also
anyone who would be interested in helping e-mail
[email protected] we have the site up on a server but we are
far from done> such as facebook
> myspace classmate etc. im in the proccess of making the
site now and i was
> wondering what i need to to to enable useres to be able
to login and create a
> profile page on my site?
hire a team of skilled programmers, put them in a cage and
toss money at
them.
or spend a lot of time learning how to do it yourself.
or try a free or commercial pre-written application
http://www.hotscripts.com/search/?q=myspace&cat=All&page=1&sort=&license_typ
e=free
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
[VIA] Need some help here ... anyone please ?
Hello,
I'm new here, just wanna ask for some solution for my pc problem.
I'm currently using Athlon XP 2.4, MSI KT400 (MS-6712AV) Mainboard, just bought for 3 months, but today when i start my pc, it comes out on the screen " Checking NVRAM ", than it stop, the system just hanged there, even that i kept restarting. Can anyone tell me what's the problem ? Does anything to do with my motherboard ? Thank you.emm, you reminded me Dr.Stu, i did remove my PS once yesterday to test on my other PC. this problem occured since i switched back. I did take out the cards and rams one by one, but same result.
Now i unplugged one of the ide cable, i can successfully start my pc to windows, but in roughly few minutes, it'll auto restart. Same problem ?
Thank you
My Specs:
AMD Athlon XP 2.4Ghz
MSI KT4V MS-6712 MotherBoard
MSI GeForce FX-5700 256mb Display Card
768mb DDR Rams ( Apacer 256mb X2 , Kingston 256 X1 )
ASUS 52X CD / 52X24X52 CD-R / Pioneer DVD-R A-109B/W 16X4X16 +-
Creative SB Audigy 2 ZS Value SoundCard
Eagle Aluminium ATX Casing with iCute 450Watt 2Fan PSU
80Gb Western D HDD 8mb Buffer
3 com 10/100 N/Card and Samsung 710v LCD Monitor -
I really need some help here....Please?
Hey guys i have posted numerous threads regarding this issue but to no avail so im going to try one last time.
Basically, Itunes works fine UNTIL i start to sync, Then it freezes up for a while then starts to sync a little bit...Then freezes and syncs a little bit..And so on..
It took me 2 WHOLE days to sync 15 episodes of southpark.
I transfered some movies and songs to my wifes laptop and it sync'd everything in around 50 seconds flat, So its now obvious that it must be my PC.
I have USB 2 and i have 6 slots, I have tried ALL the different USB slots and it stays the same.
Does anyone have ANY idea what this could be?
I spoke to the guy who built my PC and he is changing the USB ports, He also said if that doesn't work he will change my motherboard..
Is there a simple solution to this? Am i going to have to change Motherboard? ANY help would really be greatful.Hold your horses....
Have you done some "rule out" testing? How do you know that the USBs are bad? How do you know that the MB is bad?
1/ do all ports work when you plug a mouse in them?
2/ what is a throughput when you plug a flash drive into these USBs (try 1 at a time) and copy a large file onto it? Test all the ports and compare speeds - are they at least 5-10 MB per sec? If yeah, then they are OK - system wise.
If the USBs don't work and it's a PCI card, look for drivers and if no luck, buy a new card.
If the USBs are built into the MB, then you have no other choice but to replace it, but only as the very last resort. Seems to me that he's trying ot hose you, my friend.....
IN any case, it could be the drivers! Or..iTunes. Did you try to remove & reinstall?
Maybe you are looking for
-
Corporate VPN no longer works on WRT310N
I had a WRT54G router installed and my corporate VPN worked fine. I gave that one to a relative, replacing it with a WRT310N, which comes with "all" of the VPN settings enabled. I tried the corporate VPN, and it worked for about 10 minutes. Now, I
-
does anyone know the cost of an airport card for a powerbook g4? got my logic board replaced and airport card hasn't been installed onto it?
-
Error when i login in behance and CC desktop
when i login on behance it show error "Email is already linked to Adobe ID" i try login on cc desktop it show "there was a problem with your request please refresh the page and try again" help me [email protected]
-
Bridges Parent application error
When I try to open a picture with camera raw in bridge I get an error that says, "Bridges parent application is not active, Bridge requires that a qualifying product has been launched." What can I do about this?
-
Coding in Update Rules accessing a Z-Table
Hi, I have a datarecord that looks as follows: 0MATERIAL: 1000 ZMC (Manufacturing Company) 03 ZFAC (Facility ID) 16 ZSHIP (Total Shipments) 500 Units <b>There is a Z-Table in R/3 (ZPLANT) that maps ZMC a