My new lr3 comes up with the usual error changing modules....
Hello. I've just purchased a lot of adobe software, cs5 Production Premium and Lightroom 3. Now adobe has loaded on fine and is working, but lightroom, asks for my serial number which i enter and then continues to try open, only to come up with the frequently common issue of errors with changing modules.
Now i have only just brought a new Imac this week as well, so i have no idea how to get around it yet and from other discussions on the forum i am so confused and have no idea how to find all the files for the software.
I've deleted and reinstalled now around 9 times, even tried installing it on my external hard drive which had the same thing happen. It works fine from my guest account, but i don't want to access it all the time in there as i have nik software which i need to use through it and every time i go to use nik i have to enter my product codes, which don't seem to save as it is a guest account.
Please help, i have about 3 shoots of images i need to go through, i swapped over from my pc with cs2 on it for this software only to have these issues. I am useless as to how to even move about on the mac yet so i really need step by step instructions i am that bad!!
thanks
bigsarg.7
It is some kind of permissions issue, and weirdly it often seems to be linked to Nik software. I wonder if Nik's putting a file there with different permissions - did you install Nik first, by any chance?
Anyway, to fix, you can just copy the files over from the other account. Copy the folder from the guest account after you've entered your serial number in LR3 in the guest account. You might need to transfer them to another shared location temporarily.
From memory, primary folder to transfer is Macintosh HD / Users / [username] / Library / Application Support / Adobe / Lightroom /
Give that a shot and see if it does the trick.
Similar Messages
-
Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
How to open Camera Raw in Bridge, it comes up with the following error
How to open Camera Raw in Bridge, it comes up with the following error Bridge parent application is not Active Bridge requires that a qualifing product has been lanched at least once to enable this feature. It opens in Photoshop CS6 & Elements 10 but not Bridge?
You need to look at all programs in your uninstall list, and see if you spot any old trials that are no longer active.
Camera Raw in Bridge and PS are the same program, so its not the program but access. Would have been nice it you had stated OS, but here are locatons of camera raw for both OS.
Win Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings note: appdata a hidden file.
Mac Users/[user name]/Library/Preferences -
this has just begun lately--what is the fix??is it a setting preference by any chance???
We simply must figure this out for you. Can you recall if there have been any changes to the phone since this began? Have you tried the power/off trick?
Does the navigation bar move at all?
TamaraH_VZW
Follow us on Twitter @VZWSupport -
can any anyone help i have been trying to install itune's onto a new computor with windows 8 i keep getting an error #2324.i also tried to unstall itunes,quicktime etc. and get the same message please help!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
i am connected to the internet when i start the download and at no point do i get disconnected? ive tried using my friends wifi's too and the same happens? HELP!
Hey mikeefosteer,
Thanks for the question. I understand you are experiencing issues updating to iOS 7. The following article may help to resolve your issue:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
If you are experiencing error 3194, see this article:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
http://support.apple.com/kb/TS4451
If you are experiencing a different error message, see this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks,
Matt M. -
I cannot install LR 4 on my macbook pro. It comes up with the following error message:
Operation could not be completed. (com.apple.installer.pagecontroller error -1.)
Can you help?You computer doesn't meet the minimum system requirement to install the LR4.
Check it from here :- www.adobe.com/products/photoshop-lightroom/tech-specs.html -
I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on
Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.
-
I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...
iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2 -
Does the new macbook pro 13" with i7 usually heat up a lot?
Hi Guys, Ive got a brand new 13" macbook pro with the i7 processor. It gets really hot when im doing something simple like watching online videos. is this usual? i only got the machine yesterday
From a processor standpoint, watching videos is anything but "something simple." Lots of stuff has to happen to make nice movies on-screen. So the answer is "yes"--it's normal.
The limits on my 13-inch 2012 MBP for core temps are shown as 221F/105C. What you "feel" may be warm but probably not to those levels. Macs are designed to do a safety shutdown if the internal temps get too close to the point of being dangerous.
When watching videos, place the MBP on a firm flat surface so air gets underneath, and make sure nothing obstructs the hinge area on the back of the case. The air intakes and exhaust are both there. Don;t set it on your lap without a lab board or use it on a blanket of pillow.
If you wish to monitor your temps in real numbers so you don't have to guess, I recommend this free utility:
http://www.bresink.com/osx/TemperatureMonitor.html
i only got the machine yesterday
If it continues to be a concern to your peace of mind, by all means have Apple check it out. It's under warranty. -
I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?
With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another. -
Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another. -
I tried to access my itunes account on my new iphone 5s i couldn`t remember my id and password and tried to set upa new account but this failed, but have since found all the id and password for my original account but my phone only comes up with the alternative email i tried to use and i can`t change this,can you help please?
Hi ruffdog64,
If you are having issues changing the signed in Apple ID on your iPhone, you may find the following article helpful:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Regards,
- Brenden -
I have a new laptop running Windows 8.1. The 10.3.1 version downloaded, but it was incompatible with Windows 8 and 64-bit. Then I tried to download Itunes 11.1.5 and it comes up with the box asking me to save. When I click on save...NOTHING happens. AAAAAHHHHH!!! I even clicked on the download list to see if it is possessed and downloaded somewhere I didn't choose, but that's NOT happening either. Please help me! I have been messing with this and 4 other problems on this laptop for the last 32 hours. I'm getting tired and frustrated. Also, I haven't even put music on THIS Laptop because on my other one, I ended up with at least 5 copies of EACH SONG. Let's see 636 X 5 = 3,180 and they were in EVERY POSSIBLE LOCATION!!!
Thanks for your time,
LauraSee the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2
Maybe you are looking for
-
Drag and drop not working correctly.
I've got a 2nd monitor connected to my iMac 27". Before, whenever I had a finder (also happens on Adobe Bridge) window open on the other monitor and I drag and drop to the desktop, it would drop the file in the exact spot I dropped it at. Now, for so
-
Problem accessing smb share since change to Windows 8
Hy, I have a smb share folder on my router (I connect a pen and is shared in the network), with no password. I am able to access from Windows 7 and Linux, but not from Windows 8. The reported error is: The device or resource (SERVER) is not set up to
-
How to get templates visible in assets panel
Hello! My problem is to get the templates visible in the assets panel. I created a site where the templates are visible in assets panel (the first phase of the pic). In order to meet the demands of the server, I had to change the folder structure of
-
How can I find the largest BLOB in a table and how big it is?
Hi I have a massive table with 10 million rows storing images as BLOBS as well as some other data. Is there a way that I can find which is the largest BLOB in it and how big it is? Any help would be appreciated Flaz
-
I want a script to exit when it executes successfully and to stop when there is a error, so instead of WHENEVER SQLERROR EXIT, I want something like WHENEVER SQLERROR CONTINUE, ELSE EXIT. How can it be done?