My new MAC 10.10.3 will not recognize my Canon cameras or my Kodak camera. Help from the Geek Squad was useless.
My iMAC 10.10.3 Yosemite will not recognize any of my two Canon cameras or my Kodak camera. What's the solution?
Can you temporarily connect some other USB device to verify that your PowerBook's USB ports are in working order? Do you have another computer to which your camera can be connected to verify that a working USB connection is being made from the camera?
If we can somehow eliminate a hardware issue, then you can focus on software. Have you tried creating a new admin user account? If the new account recognizes your camera, it would narrow the problem down to something within your regular user account.
Similar Messages
-
Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it. -
I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
Have a new IPad with IOS6. Will not send emails. Addresses are valid but get notice each time that "recipient was rejected by the server." Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do. Really miss Steve Jobs.
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works
-
ipod 7th generation not recognized by windows 8? it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer. help?
Hi stitchinstar!
I have an article for you that will help you troubleshoot this issue with your iPod and iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Firefox will not open at all. I tried to remove it from the programs to try to reinstall it but it wont let me remove it. So I tried to download again anyways and ff still wont open. My email is alicia@****
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites -
i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!! please help! thanks maggibnd
Do they play in iTunes?
Can you directly redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.
Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G -
My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
Mac osx 10.6 will not recognize disk image of HP driver download
Wanted to scan from my HP officejet pro 8600 and send to my Mac desktop. Message said that I had to download a driver first, so I did, but now the computer will not recognize the disk imag. I don't know what to do so that the Mac will recognize the disk and allow me to install the download.
Hi @dabeck
I would like to help you install the software for your 8600 onto your Mac. Since the Mac is unable to recognize the disk image file, I would first suggest we repair the disk permissions. Please use the steps below to troubleshoot the issue;
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > Officejet-Pro-8600_v12.23.0.dmg
Please let me know the outcome of these efforts. I hope to see this resolved quickly for you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Downloaded new iTunes and now it will not recognize my iPhone or iPad
I just installed the latest version of iTunes yesterday. Now it will not recognize neither my iPhone nor my iPad. Is there a fix coming for this?? I can see from the comments that numerous other folks are having the exact same issue.
http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started. -
IPhoto 08 Will not recognize a Canon EOS 450D
I am trying to download some photos from a friends camera to my Macbook and it will not recognize the camera, can you please help me. Mac OS10.5.7 with plenty of RAM. The camera was purchased in England and I am in Canada.
Thanks.
LizSince there is no detail I'll guess - if the photo is in sRAW mode Canon has not released the specs for sRAW and it can only be processed by their software
If the camera is in normal RAW or JPEG then post back
LN -
Photoshop CS5 will not open my Canon D6 images in raw. Tried both ps and bridge. Have run updates. Have installed Canon utility files. Still does not recognize the format. Any suggestions?
Hi,
Photoshop cs5 won't update to the camera raw plugin required (7.3) for the canon 6d camera raw files.
Other than upgrading to photoshop cs6 you could use the free 7.3 DNG Converter to convert your files to dng copies which cs5 should then open.
Or look at Lightroom which is cheaper than an upgrade to cs6.
dng converter:
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519 -
My 15" iMac G4 800mhz will not recognize my iPhone 4s at all. It charges but doesn't load as external memory or in itunes.
I am running OS X 10.4.11 and using iTunes 9.2.1.
I have tried to be as specific as possible, I hope somebody can help as this is the main thing I will be using my mac for.
Thanks in advance.....and an 800mHz Mac cannot officially run 10.5.8. There may be some third-party hacks to allow tricking the installer into thinking the computer qualifies and permit the install to continue, but 10.5 will be very sluggish on that machine even if you have a lot of RAM.
The other problem is valid 10.5 retail install disks. They are getting hard to find, only on DVD (not all early iMacs have DVD-capable drives), and often sell today for more than their original price of US$129.
Maybe you are looking for
-
Can I use my iPhone charger for the ipad
Is it okay to charge my ipad with my iphone 4 charger?
-
When I creat setup project in Visual Studio 2005 with only cvirte.msm merge module installer finish the unstallation successfully, however the program asks for MESA.DLL. When the NImesa.msm is added to the installation package the installer fails wit
-
Why all RAW files open as 0.1MP images
Help! Suddenly All Canon RAW files shown as small 0.1 MP images in ACR 8.3 on Mac OS 10.9 (rather than their normal 20 megapixel size). Even ones that I successfully edited before. This does not occure on my iMac running the same OS and using the
-
E-mail via Workflow task is not send they say aprox once a month
Hi there I am asked to check one system with a workflow running 2+ years. It is actually an task with method which sends an e-mail when Purchase requisition is created. It istriggered by event in user exit(via function). The version is IS oil 4.6C.
-
I need some help coding in labview 2012. I am hooking up a Pololu High-Power Motor Driver 18v25 CS to a Concentric LACT12P-12V-5 Linear Actuator with Feedback: 12" Stroke, 12V, 1.7"/s. Thanks!