My new Mac OSX 10.7 does not recognize my existing hp j5750 all-in-one?

Error message: You can't open the application HP Installer because PowerPC applications are no longer supported. How can I get the new Mac to recognize the all-in-one?????
This question was solved.
View Solution.

Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Mac OSX 10.8 does not recognize HP LaserJet Pro M1213nf MFP

This is probably an obsolete system support problem.
This LaserJet Pro M1213nf is an old product from HP that I just recently (~3 months) purchased from a vendor as new. The MFP system is flawless and except for the occasional scanner tilt in grabbing the sheet from the automatic document feeder, works perfectly.
Unfortunately, when I bought it, I used an old Macbook with Snow Leopard to test it. Worked beautifully. I recently purchased a new Macbook Pro with Mountain Lion, and it does not work with that. This Macbook is going to be my primary system from now on.
Googling this problem has convinced me that neither HP nor Apple intend to support this, at least not anytime soon. Updating drivers from the store has not helped. In fact, each time it has happened, I have had to uninstall the new driver, and install the old Lion version of the drivers (see below).
Current status:
1. It prints without a problem. It copies too, but I don't really use that a lot.
2. It scans but only with the HP Scan application bundled with the Lion version of the driver. (which was the last major version where this was supported)
3. Image Capture, Preview, etc. do not work with this and the OS does not even recognize the scanner.
I installed sane-backends to work around the problem but I have not really invested a great deal of time into it and that did not help.
My question is - how do I hack it to work with my Mountain Lion install natively? I use Linux regularly, and have absolutely no issues compiling software, tinkering with things, using open source software, etc. My understanding is that Mountain Lion has changed the interface for scanners and that new interface is not available for older scanners.
Why do I need this to work? Well, I scan a lot of documents and there are some AppleScripts I want to use to do some standard post scan processing to reduce PDF size. The native HP scan application that comes with the drivers is an irritating piece of crap that wastes my time everytime I need to do something.
And I am not going to throw out a perfectly good MFP just because Apple and HP want to generate some undeserved profits off me. Good hardware always trumps artificial commercial software choices for this engineer.

Just saw your reply. I am not sure what you are suggesting.
I have the following in my Mac Harddrive/Library/Image Capture/Devices folder:
Canon IJScanner2
Canon IJScanner4
EPSON Scanner
HP M1130_M1210 Scanner
However, the icon for the last mentioned is different. It does not have the Image Capture icon. It simply has the generic application icon (two white papers with an "A" formed out of a ruler, a pencil and a brush). I doubt that the icon makes a difference, but it is what I observe.
The permissions for the first three and the last are identical.
The file sizes for all the files are in the same size range (except for EPSON, which is much bigger).
I should reiterate that I am using the Lion version drivers on Mavericks (just upgraded from Mountain Lion yesterday). Those are the newest drivers for this MFP.

Elements 13 does not recognize my Epson Workforce 633 All in One, as a scanner. Did I upgrade to lower functionality?

I've installed all the latest drivers. The scanner scans, the printer prints, yet E13 is unable to find my scanner. I've checked the FAQ pages and most links I've tried are broken or the info makes no sense. I'm tired of digging for a solution that should have been solved in my $128.00 "upgrade". Where can I find the Plug in to fix this issue? Why is it so difficult? This is really popular software and a really popular All in One. Somebody dropped the ball.

Elements Organizer 13.0.0.0
Core Version: 13.0 (20140831.m.62014)
Language Version: 13.0 (20140831.m.62014)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 30.3MB
Catalog Cache Size: 164.1MB
System:
AZUS Z87-PRO Motherboard
Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz 3.50GHz 3.50GHz 3.50GHz
GeForce GTX 760
Operating System Name: Windows 7 Home Professional 64 bit
Operating System Version: 6.1 Service Pack 1
System Architecture:
Built-in Memory: 7.9GB
Free Memory: 3.8GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (HL-DT-ST BD-RE BUS: 2 ID: 2 Firmware: BH16NS40)
G: (TSSTcorp CDDVDW BUS: 2 ID: 2 Firmware: TS-H653Q)

Itunes on my Mac 10.4.11 does not recognize my iphone

itunes on my Mac 10.4.11 does not recognize my iphone 4S
also, once I plug in my iphone, it is recognized as a camera, but nothing to do with music.
if i have to upgrade software, how do i do that?

You get Mac OS X 10.5 on DVD if you have a PowerPC G4 or G5 Mac, or Mac OS X 10.6 on DVD if you have an Intel Mac. If you're using a G3 Mac, you need a newer computer.
(66587)

HT201302 I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them Do you have to use PhotoStream to do this. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Tha

I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?

How did the photos that you want to copy off get on the iPad ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

My new Dell Win 8 PC does not recognize my CS5 installation disk.

My new Dell Win 8 PC does not recognize my CS5 installation disk.
I'm willing to download from the web, but I can't find the right site.

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ?

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Cedip,
in September 2012, following the release of Mountain Lion, Phonic advised Firefly owners that their products’ support ended with Lion — with the possible exception of the Firefly 302 USB. Since they didn’t support the Firefly 302 FireWire under Mountain Lion, they’re not going to support it under Mavericks either. (Note that Mavericks was first released eight months ago, not one year ago.)

Mavericks on my late 2013 Mac Mini (8gb RAM) does not recognize my APC650CI UPS as a UPS

I have a late 2013 model Mac Mini running Macvericks.
I just bought a an APC Back-UPS XS 650CI for it (I have 3 other Back-UPS 650CI for other systems - Windows 7 and 2x Netgear NAS setups).
In the Energy Saver panel of System Preferences the Back-UPS 650CI is not recognized, but it IS correctly listed in the USB section of System Profiler.
I have tried other UPS monitor programs: PowerSave UPS does NOT recognize it, but apscupsd DOES recognize it.
The Netgear ReadyNAs DOES recognize the new unit (I tried swapping the two Back-UPS XS 650CI's around)
I have reset the UPS - still not recognized.
I have tried on of the other Back-UPS XS 650CI's that I have around - not recocognised.
I have reset the Mac's Pram - still not recognized
I have reset the Mac's SMC - still not recognized
I have reset the com.apple.PowerManagement.plist - still not recognized
My ancient Macmini1.1/Intel Core Duo DOES recognize the Back-UPS 650CI in the Energy Saver panel of System Preferences.
Thanks for your help
Andrew

Answering myself
Had long conversations with APC/Schneider (quite helpful once you get past the drones)
They weren't aware of the problem but it does seem that Apple have removed/omitted the code that used to recognize the APC Back-UPS XS650CI at some point after Snow Leopard - Lord knows why. This despite the fact that it is correctly listed in the USB section of System Profiler.
The only solutions that I can see is either for APC/Schneider to get Apple to reinstate the relevant code (unlikely) and/or for APC/Schneider to issue an updated version of PowerChute for Mac (long overdue), which is possible but don't hold your breath.
I bought the (rather expensive) PowerSaveUPS app from the Apple Store but that doesn't work either (http://www.powersaveups.co.uk/) - I've emailed them to grumble but no reply yet.
In the meantime best bet is to use apcupsd for Mac - it isn't ideal but it works - RTFM.
The latest iteration is available on http://sourceforge.net/projects/apcupsd/files/osx-binaries%20-%20Stable/3.14.11/
Cheers!

LR 4 on OSX 10.8 does not recognize iPhone

Ever since upgrading my Macbook Pro to 10.8 LR 4 does not recognize my iPhone 4 (iOS 5.1.1) on the import menue.
No problem with iTunes, same problem with iPhoto. Help anyone?
Gabriel

Just saw your reply. I am not sure what you are suggesting.
I have the following in my Mac Harddrive/Library/Image Capture/Devices folder:
Canon IJScanner2
Canon IJScanner4
EPSON Scanner
HP M1130_M1210 Scanner
However, the icon for the last mentioned is different. It does not have the Image Capture icon. It simply has the generic application icon (two white papers with an "A" formed out of a ruler, a pencil and a brush). I doubt that the icon makes a difference, but it is what I observe.
The permissions for the first three and the last are identical.
The file sizes for all the files are in the same size range (except for EPSON, which is much bigger).
I should reiterate that I am using the Lion version drivers on Mavericks (just upgraded from Mountain Lion yesterday). Those are the newest drivers for this MFP.

I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly. I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

Transferring programs does not work well with Adobe applications. You should install them.
As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

I am trying to create a new Apple password but Apple does not recognize my one and only email so stuck on a merry-go-round. Any suggestions?

I am trying to create a new Apple password but Apple doe not recognize my one and only email address, so I'm stuck on this merry-go-round. Any suggestions?

inabird
you haven't told us what "Park" the "merry-go-round" is in
tell us what actions you take to get Apple not to recognize your email address...
Are you formatting it correctly? - username @ someDomain .com <- NO Spaces (I did it so the system wouldn't make an email link out of it)
Tell us what happens when you realize that Apple is "not recognizing" your email. What message do you get, exactly? Take screenshot of the entire screen for context
ÇÇÇ

My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

Hi.
I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

I imported M2T into CS4 Premier Pro on Mac OSX Snow Leopard does not play

I imported several M2T files into CS4 Premier Pro on Mac OSX Snow Leopard, the files import just fine and when I double click on them, I see the video in the preview panel. However when I hit play, nothing happens. It does not play, just sits on the first frame. Even when I drop it into the timeline, same thing happens. Does not play but if I export what I put into the timeline, the video exported is fine. So I can't edit it, because I cant see where to put edit points. I really need help, need to get this project done asap.

I have fixed this problem myself by searching the forum with argument "playback" "playback_issue". This a known problem. Go to link for a solution http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html
Thanks to myself.
Jim

OSX 10.5 Does not Recognize Login Password- Please Help!! This is insane!!

Ok, so this problem is incredibly annoying and has got me perplexed. I recently re-installed Mac OSX 10.5 for various reasons.I am running a Macbook Pro that is 2 years old apprx. I did the following steps:
1. Booted from Install DVD (authentic)
2. Erased/zeroed out HDD
3. Installed OSX 10.5 on the Drive. And OSX is the only OS on the computer.
4. I went through the set up, and created a login name and password. The password is long, like around 30 characters. This is the same password I had used before, on the same OSX 10.5 from the same disk with absolutely no problem.
5. I slowly typed each character, having wrote each character down and did it for both pass and verification boxes on the initial screen when you boot for the first time and set up the user account.
6. This was all accepted, and I finished the process.
Now here is the rub, the password does not work! It logs in to my user name automatically using, I assume, the password I gave. But when I go to install my programs again, and it asks for the system password, it tells me the password is incorrect. I type it out completely and correctly off the piece of paper, and it says it is not correct. I have now retyped it 15 times, so there is no chance of it being a typing error (and same thing after re-re-install). ***!! I just put it in, what other passwords could it be!! I even erased the entire HDD clean a second time, and re-re-installed the OS and repeated the above. Still the same problem.
Can someone give me any idea what might cause this? I have tried everything I can think of, and cannot think of any cause.
Thanks everyone,
DpDimick
Message was edited by: DpDimick

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

My new Mac OSX 10.7 does not recognize my existing hp j5750 all-in-one?

Similar Messages

Maybe you are looking for