My new mac pro tower might have died but i cannot tell. help

Left on my mac pro tower 4-core with 3 gigs of ram on all night as I often do. I merely power down the apple 23" monitor because that's the only that heats up. Came down in the morning, turned on the monitor and all I see is a white screen. just all white. never seen that before in all my years as a mac user. I made sure all connections were secure and rebooted. THen.... whiteness. blinding nothingness. I'm taking a wild guess here that the mother board is okay but the Hard Drive is dead? After work, I'll try to boot up from the start up dvd however.... it doesn't appear to even go through even prelim start up. i don't get the screen of death or anything. just nothingness.
Anyone had this problem? I got the computer and monitor about 6 months ago and it's been flawless. Didn't do anything different last night. no downloads..nothing.
Help!

Hi-
Try resetting your PRAM/NVRAM:
Resetting PRAM and NVRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
If that doesn't work, try booting to Open Firmware (commandoption+of) and reset the NVRAM:
http://docs.info.apple.com/article.html?artnum=42642
If still unsuccessful, but, able to boot to open Firmware, try disk repair using fsck:
http://docs.info.apple.com/article.html?artnum=106214

Similar Messages

I have a brand new Mac Pro Tower that continually kicks me off the internet and sometimes starts up not connecting to the internet?

My brand new Mac Pro Tower that I spent a small fortune on sometimes boots up and does not connect to the internet when every other computer in my office does and other times it just kicks me straight off. My question is, is there a problem with the wi fi on these machines?

Brand new nMP Mac Pro 6,1 Late 2013.... and it is defective - the older silver tower might be easier to find parts but at least it is not 65 lbs and is something that can be taken in - which I think you really need to do.
When you run etrecheck from www.etresoft.com it can show what is installed, drivers and might help point to something on software side.
Grant is the go-to person here I think among others for networking issues.
Airport Express and signal strength, channel it is trying to use, whether the Network control panel settings are "correct" or need to be changed (even the order, what it is trying to look for and use).
If you move it to another spot or put another computer over in that general vicinity...? behaves the same.
I recall reading where the MacBook Pro model in 2012? and switched to a new chipset and some very long (huge) threads in their forum - which means also there was no real solution given.
No, should not be. And other than network tests would be booting into Apple DiagnosticsTest mode - pulls down from Apple servers.
http://support.apple.com/kb/HT5781

FCP won't launch on new Mac Pro Tower

I just got a new Mac Pro Tower and installed Final Cut Studio, but Final Cut Pro won't launch. It just hangs on the opening splash screen and I can't even force quit out of it. Same thing happens if I try to open an FCP project. I have run all the updates, trashed prefs, etc.
Any ideas?

OK....so I think I found the problem even though it makes no sense to me. It seems that if I have my DVCam deck (which is connected via a 4-pin firewire to 9-pin firewire cable) powered on while I try to launch FCP, it causes FCP to hang on the splash screen. If I turn the deck off, and launch FCP, it launches perfectly.....and it continues to work after I power the deck on. Very bizarre behavior but I have tested it about 5 times now and it works fine when the deck is powered off and hangs when the deck is powered on. Anybody else have a simliar issie?

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

Hello Forum Members,
I figured it out. You have to select the actual logo of the Lightroom catalog and then click on "get info" and allow what ever your new user name to "read and write". That worked!
Henri Silberman

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

Can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

Disclaimer: This response assumes that a "new mac pro tower" is the new cylindrical model.
1. You cannot download Final Cut Pro 7. FCP7 is part of Final Cut Studio (2009) a.k.a "FCS3" and it was only released on a DVD set. It can still be purchased online (maybe even from Apple) for prices ranging from a few hundred to $1K and it is 5 years old and unsupported.
2. Although there are reports of systems running FCS3 on Mavericks, there are also a host of problems associated with this OS/software combination.
3. A new version of iMovie Pro Final Cut Pro X has been released which is reportedly very fast and is supported.
It's all a matter of what kind of movies you make...

New Mac Pro Tower Configuration

Hi
I am currently looking at purchasing a new Mac Pro Desktop Tower to run CS 5.5. I am planning to use it for longer video projects with premier and AE. I would also be using audition to some extent.
I don't think that I can afford to go with a twelve core version of the Mac Pro, but I am wondering what is the best way to configure the ram/processor/video card?
Also are there any compatability issues with OSX Lion?
Any help will do.
Thanks

While the case for building a PC is strong and valid, and while I would build a PC if I needed a new system right now, I also understand the needs of some institutions to build a Mac. Here is my advice in that regard:
1. You don't need dual processors. I have a single 6-core 3.33GHz chip in my 2009 Mac Pro (which I upgraded myself) and it handles heavy work in Premiere and After Effects CS5.
2. Don't buy any RAM from Apple. With the price of hard drives today, it isn't such a big deal to have Apple install extra drives for you, but if you're even slightly technically inclined, you can install more RAM and hard drives for less if you shop and buy from other vendors. There is a great Mac-specialty website where I buy my RAM from called OWC (Other World Computing link) that has excellent deals and service. I think 24GB is minimum ($322), and 32GB is better... only $425 right now.
3. If you have the budget, a proper third party RAID card is a much better deal and performer than Apple's Mac Pro RAID Card, so don't waste your money there unless you really want to limit yourself to an internal RAID 5 of no more than four disks. I got by with a 3-drive RAID (AID) 0 stripe of disks for a year before needing to expand to a proper RAID. With three Apple drives striped together, you'll get a sustained data throughput of 330MB/sec both read and write speed, which is good enough to edit some HD video. I edited a feature-length film shot on P2 at 108060i/24p using only three internal Apple 1TB disks, with backups to external drives holding a safety net for my data.
4. You don't need to buy an NVIDIA /CUDA card (Quadro 4000). I have the 5870 from Apple, and I can edit DSLR 5DMkII footage in smooth real-time, but that is helped by the 32GB of RAM and fast RAID. I have a CUDA card, an older GTX285, and while it was good for Premiere, I felt it was slower than the 5870 in After Effects, which is where I spend more time rendering anyway.
I'm not sure how much weight you'll be placing on student projects being safe from loss in the event of a drive failure, but you could either have them back their projects up themselves on their own external drives, or build a robust RAID. I have an Areca RAID card that runs eight 2TB disks in RAID6, which yields 12TB of very fast data that is also still safe if any two of the eight drives fails before being replaced. Depending on the number of students using the system, it could cost less to build a similar RAID than have each student buy their own drives. Question is, does the school eat that cost of security for the students, or let them shoulder that cost themselves?
I was a film school student myself, and I know what it's like to sign up for a four-hour block on a limited number of edit suites. You want the system to run faster than the students, so they can be creative without wasting their time slot waiting for the computer.
With your education discount from Apple, you should be able to get a 6-core 2010 Mac Pro, RAM, disks (and RAID if you go that route) from 3rd parties about $6000... much less if you skip the RAID system. If I can help in any way, let me know. I love my system, even if I could build it in a PC today at half the cost. Adobe works the same (or better) on a PC as it does on a Mac once you're in the software, but if you have to go Apple and can't wait for what may come out in the future, consider a system like mine.
2009 Mac Pro (updated to 2010 firmware... you'd buy a 2010 and not worry about that.)
3.33GHz 6-core CPU
ATI Radeon HD 5870 (still runs software acceleration very nicely)
32GB RAM @1333MHz
(4) internal hard disks (1=OS X, Adobe CS5, 2+3=RAID0 (stripe) for scratch files, 4=other backups and storage)
Areca 1880ix-12 RAID card
Sans Digital 8-bay tower
(8) 2TB WD RE-4 hard disks in RAID6 = 12TB parity array (sustained 816MB/sec write, 714MB/sec read speeds)
Various backups in external disks.
Good luck!

New Mac Pro seems to have problems - what type of re install?

I have a relatively New Mac Pro (2x 2.8 ghz 8 core with 4GB ram). I upgraded from a G5 and ran the migration assistant as normal. I use a lot of programs and use it daily on a professional basis. Mostly used programs are Mail, Safari, Photoshop, Bridge, Indesign, iview media Pro, Rapidweaver, to name but a few.
I have noticed some issues, such a computer running slow, taking its time to do very simple operations. I also have Adobe software misbehaving and crashing, especially Bridge and Photoshop that often comes up saying "could not complete request because of a program error"
I thought that I would completely wipe the drive and start again, but this a lengthly process - especially when it comes to preferences, settings, mailboxes, etc etc.
The question is should I archive and install, or reinstall or indeed try anything else first?
Thanks in Advance..... Mark

There are some simple troubleshooting you can take.
Create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If the issue is systemwide then, you may be able to repair this with the 10.5.6 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

When the new Mac Pro's with E5 Processor coming out? Please help

Hello People.
I am in desperate situation at the moment. I had a late 2008 Mac pro which i recently sold and bought the new 8core 2.4ghz Mac pro from best buy about a week ago. As soon as i bought it, i found out that Apple is coming out with a new Mac Pro loaded with the new xeon E5 processor. My question is that when Apple is coming out with the computer since the rumor said its coming out in the beginning of March. I paid $3400 for the new computer and i really want the one which has all the new stuff in it. I have about 2 weeks left to return the computer to Best Buy and at the moment don't know what do.
Does anyone has answer to my question?
Thanks

Seeing no one, not WSJ or ComputerWorld or CNBC, just speculation. For all we know it will be another mid-Summer too..
I do think the 2.4 8-core is a ''weak' system choice. More apps and more productive to go with a higher clocked 6-core or something.
I'd direct attention to www.macperformanceguide.com that argues, if you need it don't postpone for what might be.
http://macperformanceguide.com/blog/2012/20120319_1-MacProNowOrWait.html
Even if there was an annoucement it often takes time to sort out, ship, etc.

Anyone using a 12 Core Mac Pro? I have HORRIBLE performance issues .. Help!

After the latest 10.7.4 Mac OS X update I have extremely horrible performance issues with AE ... and they were not so great before the update.
It is still stabilizing ... but an 1:19 clip in SD is taking 12 HOURS TO analyze and stabilize. !!!
The 12 cores are barely being used and this problem has been an issue since I purchased the suite over a year ago.
Does anyone else have problems using AE on their 12 CORE MAC PRO?
REPLY ONLY IF YOU HAVE A 12 CORE MAC PRO PLEASE.
There must be a problem because since the update ... Adobe Encore is PERFECT .. and ALL 12 CORES MAX OUT and the encoding is quick!!
I also have major problems between PP and AE using Dynamic link .. and slow renders in PP.
Everything else works fine .. other apps / other vendors.
I am calling Adobe today.

Thank you for your time.
I am using a 12 Core 2.93 GHZ with 32 GB RAAM and a NVidia GTX 285.
I also have a Areca 1212 PCI RAID Card. ( NOTE: I HAVE A SERIOUS RAID DRIVER PROBLEM NOW. THE RAID IS DISCONNECTED )
Mac OS X 10.7.4
Adobe Master Suite 5.5
The Apple "Console" app logs a whole lot of these three Adobe related errors:
1. 5/18/12 2:10:16.260 AM aeselflink: CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/System.framework' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
2.) 5/18/12 2:10:16.331 AM aeselflink: -[NSMenu menuID]: unrecognized selector sent to instance 0x1183100e0
5/18/12 2:10:17.333 AM aeselflink: -[NSMenu menuID]: unrecognized selector sent to instance 0x115625740
3.) 5/18/12 2:11:18.596 AM [0x0-0x9b09b].com.adobe.aerendercore: You have at least one output module template that refers to a missing output plug-in. Please check your Output Module Templates.
Only half of my hyperthreaded processors are active when using AE "Warp Stabilizer". This issue was addressed before in the Forums. There was no solution. I dont' know if it is any better in CS 6.
Also the automatic saving of all linked compositions while using the dynamic link feature bewteen PP and AE causes huge inoperatable waiting times .. unbearable. My guess is that the new "Global Performance Cache " fixes this ... which I consider update to a terrible problem .. but they sell it as a feature ( Ill go into that later.
Question:
What RAID card are you using?
Do you use the Warp Stabilizer?

New Mac Pro. Lion upgrade completed but OS having problems

I upgraded last night my Mac Pro to Lion, I bought my machine 3 months ago.
The machine was already having issues right after the install, its running very slow. Been trying to fix it but cant find whats slowing it down, I have Office 2011 and Skype installed.
I don't think I have much choice but to reinstall, but Lion does not seem to allow but media to be burned so I can do a clean reinstall.
I have found on the internet ways to burn the OS, but this only seems to work before the OS is installed. Is there any way to redownload it if you have Lion installed?

How to Create & Burn a Bootable Mac OS X Lion Install DVD
Summary
OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
http://support.apple.com/kb/HT4718

I have an apple mac pro I can send emails but i cannot receive them from anyone

I have an apple mac pro, I am able to send emails , but not receive them? I have tried deactivating and deactivating my account but so far no joy, any ideas would be most helpful.
Cheers pete

Hello, sadly Apple pays more attention to iDevices Mail than Mail for Macs.
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

I have new Mac Pro, where I have iWorks available. On older iPhone 5 and Ipad 4th I don't have it. Do I really have to Buy it for iOS when I already have it for OS X ?

I read that with new device I would have iWorks available. Please help.
The problem is also that I have another 5C - company phone, where I have it. But on different ID, because I did not want to mix it.
This is annoying.
May I for example switch my company phone to my ID for some minutes to get the iWorks on my ID and then switch back to company ID ?

It doesn't work that way. When going to ID #2 to get an app on the device, and then returning to ID #1, you lose that app, since it is associated with ID #2 only. If you want it on the other ID, you have to buy it.

Brand new Mac Pro tower fan suddenly runs full-tilt, CPU is idle

My Quad-Core MacPro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was.
At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive.
It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth.
Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures?
Thanks
EDIT: Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell.
Here are my temps: http://imgur.com/J6BLf.png
Message was edited by: armhold

Hi armhold;
Do you see anything using huge amounts of CPU cycles in Activity Monitor?
Allan

I have old CS5 disc, but my new mac book does not have disc drive and cannot figure out how to download it from adobe. they give several choices of cs5 but I do not know which one to choose. Even when I do choose one, it does not take me to a download bu

I have a CS5 disc but cannot find out which one is mine in the long list of choices. When I click on one, it doesn't go to a place to enter
serial # or a download button

Ohrita you can download the installation files for Creative Suite 5 at Download CS5 products. You can verify the software license you purchased by checking your account at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

My new mac pro tower might have died but i cannot tell. help

Similar Messages

Maybe you are looking for