My new MacBook Pro thinks it's an iBook G4.

Okay, so, this is weird.
I'd been using a 14" 1GHz iBook G4 for about four years, and just recently upgraded to a 15" 2.5GHz MacBook Pro. When I got it, I used the Migration Assistant (during the initial setup) to transfer all my files. I connected both computers via FireWire.
Since then, my computer thinks it's an iBook G4. For instance, the "Computer Name" screensaver says "[my name]'s iBook G4." At the OS X user login screen, it says "[my name]'s iBook G4." My phone reads the paired Bluetooth Device as "[my name]'s iBook G4." You get the idea.
It's not really a big deal, and it's in no way affecting functionality, but if there's an easy fix, I'd like to do it.
I'm using the 15" 2.5GHz MacBook Pro model with 2GB RAM and 512MB vRAM. I don't know if this has any effect, but I'm using Boot Camp to dual boot Windows Vista Ultimate OEM, and the disk is partitioned half Mac/half Windows.
Thanks all!
Ninja edit - I reset the PRAM the other day to fix an unrelated problem, and this problem still persists.

Hi There
In System Preferences select the sharing pane and at the top of this window you will see that you can change the name of the computer. When you transferred over everything it obviously transferred over the Computer Name as well.
Hope this helps
J.C

Similar Messages

  • My new Macbook Pro thinks it's 1999, HELP

    I have a new Macbook Pro top of the line. It's great. It zooms at the local internet point both up and downloading but at home it is a total dog.
    My old tired laptop pc that the Mac should replace is lightning fast via the same wifi, my wifes laptop zooms and my kids PC's are very fast...all via wifi.
    BUT...my new big bucks Macbook pro slugs along and is painfully slow both up and down. (it is super fast at the local internet point)
    ANY suggestions as to why this could be?
    I am in Italy and have the best and fastest ADSL that Telecom Italia offers.

    So Mezz, your home wifi network is so 1999. Your MBP is 2007. Have you heard of obtaining a clue about the settings on your home network? There are people, even at Telecom Italia, who could do this quickly for you, by phone or at your home, if they are not all out on vacation or striking or something. Ask the tech to crank up your asdl for your MBP, and make your family's clunker pc boxes crawl? Heh. The tech help on the phone will walk you through your configuration I am sure. Why your MBP works faster at the local Cafe Del Dogge: their configuration is more ... robust? Clone it. Your home wifi should be so robust. You are already paying the big Euros for it to be robust. Make it happen! Let your American side come out! Whine and you shall be served! Call the tech service for Telecom Italia. Maybe it's in Bombay, too? Ciao. Maybe after being on hold a while you'll be at the top of the line there, too.

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.

    Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.

    Hi a,
    http://www.mctiviausa.com/
    There has been "talk" on and off of Apple TV doing it (and people have done it with a hack), but I haven't really followed it.
    It would be a whole lot cheaper getting an adapter (as needed) and cable and simply pluggin it in when you're in the kitchen.

  • New MacBook Pro 13 i5 Wireless Issues.

    I got the new MacBook Pro i5 2.3 the day it came out. So maybe a week and half ago.
    I`m having intermittent wireless issues. I have done some testing and even replaced my older AirPort Base Station with the new Dual-Band one, but still seeing a drops from the network. I have a ping going to my router and to the ABSE. I tried changing the channel and using 5GHZ or 2.4GHZ. I also have a AirPort express and seen similar results. I tried reseting the PRAM, repairing permission, I did not reinstall the OS but I dont see how this would help. I think there is a hardware issue with the wireless card/antenna.
    I did upgrade RAM and HDD was changed to SSD (intel G2 SSD). There are no other issues, machine is fast, no lock ups. Other devices on the network do not seem to drop any connections (ATV, ATV2, iPhone4, iPad etc..)
    The network drop outs are short but are noticeable and if a ping is going I can see the drops
    *-- 192.168.1.1 ping statistics ---*
    *1527 packets transmitted, 1505 packets received, 1.4% packet loss*
    *round-trip min/avg/max/stddev = 0.779/12.203/396.084/42.274 ms*
    Any help is appreciated as I`m really frustrated but this issue.

    Here are some of the pings.
    +*64 bytes from 192.168.1.3: icmp_seq=2190 ttl=255 time=1.138 ms*+
    +*Request timeout for icmp_seq 2191*+
    +*Request timeout for icmp_seq 2192*+
    +*64 bytes from 192.168.1.3: icmp_seq=2193 ttl=255 time=1.701 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2194 ttl=255 time=1.653 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2195 ttl=255 time=1.723 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2196 ttl=255 time=1.470 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2197 ttl=255 time=1.435 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2198 ttl=255 time=1.217 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2199 ttl=255 time=1.115 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2200 ttl=255 time=1.433 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2201 ttl=255 time=1.002 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2202 ttl=255 time=1.057 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2203 ttl=255 time=1.222 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2204 ttl=255 time=0.769 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2205 ttl=255 time=0.821 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2206 ttl=255 time=0.723 ms*+
    +*Request timeout for icmp_seq 2207*+
    +*64 bytes from 192.168.1.3: icmp_seq=2208 ttl=255 time=54.892 ms*+
    +*Request timeout for icmp_seq 2209*+
    +*Request timeout for icmp_seq 2210*+
    +*64 bytes from 192.168.1.3: icmp_seq=2211 ttl=255 time=1.313 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2212 ttl=255 time=0.936 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2213 ttl=255 time=1.839 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2214 ttl=255 time=0.879 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2215 ttl=255 time=63.446 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2216 ttl=255 time=24.384 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2217 ttl=255 time=105.923 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2218 ttl=255 time=41.322 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2219 ttl=255 time=1.853 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2220 ttl=255 time=0.811 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2221 ttl=255 time=0.721 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2222 ttl=255 time=0.791 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2223 ttl=255 time=3.816 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2224 ttl=255 time=1.052 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2225 ttl=255 time=0.688 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2226 ttl=255 time=89.272 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2227 ttl=255 time=49.459 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2228 ttl=255 time=15.891 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2229 ttl=255 time=0.745 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2230 ttl=255 time=0.724 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2231 ttl=255 time=0.680 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2232 ttl=255 time=1.950 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2233 ttl=255 time=0.600 ms*+
    +*Request timeout for icmp_seq 2234*+
    +*64 bytes from 192.168.1.3: icmp_seq=2235 ttl=255 time=0.725 ms*+

  • Strange wifi problem on a brand-new MacBook Pro

    Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
    So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
    Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
    One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
    So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
    I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
    Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

    Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
    mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
    Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

  • What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

    Hi all,
    I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
    I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

    ARealMac(PPC)User wrote:
    ...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
    While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
    If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
    You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could  go on the external.
    In any case, your data is more important than your SSD, so back up, back up, back up.

  • How do I get my New Macbook pro to sync with .mac account????

    I just purchased a new Macbook Pro to replace my Ibook G4 which had been successfully syncing on my .mac account with my Imac G5 desktop computer.
    The new Macbook Pro has Leopard while my G5 has Tiger. The salesperson told me that this would NOT be a problem at all. I configured the Ical to sync automatically in the preferences along with contacts and mail accounts. They both worked fine but the ICal does not sync.
    Any help would be greatly appreciated.
    Thanks,
    Skip

    Thanks for your reply. Yes I did, several times. What finally happened is after about 18 hours, the syncing started to work. I think what happened was that the mac server must take some time for backing up or whatever and all of a sudden when it did, it synced....
    go figure.
    Skip

  • Mid 2010 MacBook Pro 15" i7 or new MacBook pro 13" i7?

    Hi,
    I would like to renew my white MacBook from mid 2009. I haven't decided yet but I have two options in mind, a MacBook Pro 15" from mid 2010 with an intel core duo i7 (I think it's duo) running at 2.8GHz with an integrated card, the intel HD 3000 and a dedicated card, Nvidia Geforce 330m with 512MB of dedicated VRAM, a month old mother board and battery and a hi-res anti-glare display with 7 months remaining of apple care all for £1000. My other option would be a new MacBook Pro 13" with a dual i7 locked at 2.9 GHz and no dedicated graphics card for £1035 from amazon.
    I would mainly use it for photo editing using Adobe programs and occasionally some video editing and video gaming.
    Which one do you think is more powerful?
    ps: I would use an external monitor, 8GB of RAM and an SSD on both
    Thanks

    MacBook Pro 15" 2010
    Intel Core i7 2.8GHz M 640 Arrandale Cores 2  (2867)
    8GB max RAM 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    NVIDIA GeForce GT 330M 512MB (15.85) (369) and Intel HD Graphics 3000 (10) (309)
    MacBook Pro 13" Mid 2012
    Intel Core i7 3520M Ivy Bridge Cores 2 (4519)*
    16GB RAM max actual (8GB Apple) 2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    Intel HD Graphics 4000 (unknown) (465)*
    The 13" is a more powerful machine and it has more RAM capacity.

  • New Macbook Pro (2010) 15 inch battery issues!!!!

    Hi,
    Please help me.I sense a fraud act by the macbook servicing center in my city.
    My macbook was bought in 2010 and after having used many times I was said tha the machine was getting heated up due to poor standard of the battery and that the battery needs to be replaced.So here are my questions in points-
    1.When I get my battery replaced without warranty,Should I get the Old battery or does the servicing center replaces my battery with a new one and does nt return me my battery.
    2.The battery,when i tested through COCONUT BATTERY appliocation shows 89% capacity with 374 cycles,which means its not new.Because in 1 day it cannot be upto 374 cycles.
    3.What should be th ideal battery standby time for a new battery of macbook pro.Currently its showing only 3 hours!!!I think its totally unbelievebale.
    4.Is there any opther application to check the battery isd new or not??????

    Thanks a lot for your info, Glynn. I appreciated much.
    Unfortunately, the Apple dealer said that currently there is no this type of mac in their inventory. Therefore they can not do a complete replacement & they referred me to Apple authorized service center. Today, I got more news from this Apple authorized service center & they suggested to return my new macbook pro to the Apple Dealer where I purchased my Mac. After sent Email to Apple, tomorrow they will contact me. Hopefully they will not referred me again to other place...
    This is like they sent me back and forth and it's really frustrated. This is the worst experience I ever had in buying computer & I am feel that I paid to much for such low quality product & service.
    Sorry Apple, but this is really disappointed me.

  • Brand New MacBook Pro Cannot Connect to Airport Express

    Hi all,
    Been reading through these pages and I think there are many others with the same problem as me but with no real answer, I thought it wouldn't hurt to ask anyway.
    I have an Airport Express which I bought a couple of years ago. It initially worked fine on my old MacBook, I moved house and then it stopped working (flashing amber light syndrome). I got so fed up with it that it has been languishing in the loft ever since.
    After a brief stint with a Windows laptop I decided it was time to return to Apple, and I haven't regretted it for a second.....until I got the Airport Express from the loft!
    It simply, fundamentally and irrevocably...doesn't work! It's plugged in, amber light flashes but my nice new MacBook Pro just doesn't even recognise it exists. I have tried running the setup utility but at the first screen I am told that no unit is detected, I'm then told to check my Airport card (I assume it means the inbuilt modem which clearly works as I am writing to you guys now!). I can't even progress with the setup after this.
    I have tried each of the Airport setup utilities to no avail (lap top cannot "see" AX).
    Just as an update, I just connected my AX to my wireless router with an ethernet cable, a new network called 6ad16d appears to be available. Airtunes then works and I can connect to the internet (albeit slowly). I am not happy with this arrangement though as there is no padlock next to the new Apple network so I am worried that it isn't secure and surely I should be able to just plug my AX into the main and my hifi and it should work anyway?....just like it used to!
    My apologies for the rambling post and please excuse my lack of computer knowledge. I really hope someone can help!

    Fixed! You jut need a girlfriend with a lot of determination....not even sure she knows how she did it. Involved a lot of menus and a lot of swearing.
    Surely this should be easier?!

  • How to install Mountain Lion on New Macbook Pro from APPS

    How can I install Mountain Lion into a VM on a New Macbook Pro running YOSEMITE  from APPS
    I have it in my apps purchased but It tells me the system is to New to download/run it
    I have tried mounting my install ESD copy but it has the same Problem
    I don't have another Mac
    Thanks

    I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
         1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
         2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
         3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
         4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
    Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
    Have a good backup of everything before starting in case there are problems.
    Good luck...

  • New macbook Pro setback for Audio Production.

    the new macbook pro don't come with a Firewire 400 port anymore.
    everybody knows that usb is too slow for audio transfer and Firewire 800 is usual.
    audio interfaces that use firewire 400 can't be used and with only one firewire 800 port there's no room left 'cause we need that to connect the external drives with audio files.
    most interfaces need to be connected directly to the computer.
    Any Ideas????

    I, too, have an issue with the port configuration on MBPs -- too many USB2.0 ports, not enough FW800 ports. Nevertheless, please note that:
    1. Bilingual FW800 FW400 cables (really good ones) are available for less than $20.
    2. You can daisy chain external FW HDDs (even heterogeneously, i.e. you can cable your computer to a FW800 device using a FW800 cable and then use a FW400 cable to connect the first drive to a FW400 HDD, etc.). This capability is dependent on having redundant or multi-protocol drive enclosures (that is, you will need drives that have at least two FW ports, such as two FW800 ports or a FW800 port plus a FW400 port, not just a single USB2.0 port).
    3. You can go hog wild and purchase a full-on FW800 hub/repeater like the NitroAV Professional Firewire/1394b 8-Port device (google it). I use this device to connect five external HDDs to my MBP (four FW800 drives and one FW400 drive). This hub will set you back $150 -- not trivial, but an elegant solution if you use multiple drives, and it comes with the AC power adapter (believe it or not, some hub manufacturers require you to purchase the AC adapter separately). In my configuration, six ports are used -- five for the drives and the sixth to connect the MBP via a FW800 cable. The hub has the additional advantage of eliminating several of the cables that would otherwise connect directly to my computer, which is, after all, a laptop; the fewer things I have to connect/disconnect when I move my MBP around, the better. You can think of this as a do-it yourself version of the docking station that Apple forgot to give us, at least as far as drive connectivity is concerned!
    As an aside, my MBP (see model notes below) does in fact have both a FW800 and a FW400 port. I wish Apple configured unibody MBPs to include two USB2.0 ports and two FW800 ports -- but the above tips make the world right.
    Finally, I just don't get the gripe about cabling costs. The unibody MBPs are high end laptops -- most purchasers will have invested well over $3K in their machines. There are a thousand usage patterns; I would much rather buy what I need for my applications without incurring the expense of purchasing bundled stuff that I don't need and which winds up in a (bursting at the seams) cable/doodad drawer.

  • How to connect my old 20in Cinema Display to my thunderbolt new MacBook Pro?

    Hi everyone, I just brought a new MacBook Pro to replace a older model(brought earlier 2010), and a new thunderbolt Cinema Display. I have a old 20 inch LCD Cinema Display all the way from 2005 and brought a mini display port for my old MacBook Pro, worked just fine. However with the new Thunderbolt Display, I noticed there's another thunderbolt port behind and was thinking to connect my old Cinema Display as a secondary monitor. I've brought a thunderbolt port from amazon (http://www.amazon.com/dp/B007KB0EGC/ref=pe_175190_21431760_M3T1_ST1_dp_1 ), but my old monitor still shows black. What did I do wrong here? Thanks!

    So currently there are two displays and you expect there to be three?
    Can you swap the displays just to make sure there is nothing else wrong?
    That is confirm:
    1) MBP -> Display A works
    2) MBP -> Display B works
    Then try:
    MBP +-> Display A
        |
        +-> Display B

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Maybe you are looking for

  • Create action with entered text?

    Is there a way to create an action in PS CS3 with the ability to type different words in the middle of the action? For ex, I have a series of steps, then need to save the image to 2 different sizes/resolutions, with a different name. So I want the ac

  • Looking for LABView Programmer with Electrical Engineering Experience ($75K-$85K)

    If you wish to apply send resumes to: [email protected] Position Summary: Systems Engineer with experience in LabVIEW development, instrumentation interface and system control. The engineer is expected to develop the software and GUI, select and inte

  • Disabling partner data tab at header and item.

    25.11.2008 Hi friends, Is there any user exit to disable 4 out of the 5 partners in the partner functions tab at header and item level as my requirement is not to allow the user to change the partner functions SP, SH,BP,PY. I cant use SHD0 or  use th

  • Can not open itunes app after updating to ios7

    i updated to ios7 and now i can not open the itunes app.  it keeps crashing.  anyone else having this issue?  need help

  • Blog formatting problem

    I am trying to set up my Muse blog on BC and the formating of the layout and text is horrible. I need help on how to do that. I have tried everything and read everything I have found. Please help!!! Elvi www.renewedlife-counseling.com/blog.html