My New Macmini do not start
My New Mac mini do not start. No noice from the fan nor from the hard disc. I have tried to restart after I disconnected it from the powercable, but no difference. Do any of you have any explonations or ideas?
Call Apple Support (you have 90 days of free phone support) or your Local Apple Store (AASP) and make an appointment.
Go to > Apple - Support - Contact Apple Support
Similar Messages
-
My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.here is link to the apple product feedback website:
http://www.apple.com/feedback/ -
Old Macmini ignores ownership on external HD's, new Macmini does not.
Hi - my old Mac mini has a couple of external HD's set to "ignore ownership on this volume", as they are just storing personal files, one backing up the other nightly. I transferred them to a new Macmini, only to find my backup software won't update from one external to the other (permissions type error messages), and the "ignore ownership on this volume" checkboxes on each are not checked, and greyed out.
I've tranferred the HD's back to the old Macmini, and presto the "ignore ownership on this volume" boxes are now checked again. How can I make this behaviour transfer safely to the new comp?Thank you! I haven't yet dared try this, but I've found the following info that explains those commands in a fashion even I could understand - I take it this will work for all enclosed folders too? -
chmod stands for "Change Mode".
The numbers part is a little more complicated.... "777" is three numbers..to be nerdy and specific.. it is three 3 digit binary (base 2) numbers converted into three 1 digit octal (base 8) numbers.
The first number stands for "user", the second group stands for "group" and the final number stands for "other". There are three possible things that can be done with a file: read, write, and execute.. Here is a little reference:
execute = 001 in binary = 1 in octal
write = 010 in binary = 2 in octal
read = 100 in binary = 4 in octal
So where does the 7 come from?
7 in binary = 111 in decimal = read, write, execute
So you get:
read write execute = 111 = 1 + 2 + 4 = 7
read write no execute = 110 = 4 + 2 = 6
read no write execute = 101 = 4 + 1 = 5
read no write no execute = 100 = 4
no read write execute = 011 = 2 + 1 = 3
no read write no execute = 010 = 2
no read no write execute = 001 = 1
no read no write no execute = 000 = 0
<http://www.websitebabble.com/uploading-files-ftp/1667-what-chmod-777-a.html>
I'll have a go in the next few days (will need to switch the HD's back to the new comp first etc) when I'm feeling brave.
Message was edited by: midwich
Message was edited by: midwich
Message was edited by: midwich -
My MacBook will not start, I am getting a gray or light blue screen and nothing happens.
Apparently this has a tendency to happen when the ITunes and Photo Booth are open within one session before I shut down the computer.
So far every time that I start the computer I have to press and hold the (control alt P R) keys, then the laptop starts and I get the apple in the screen and the rotating gear.
Please advice what to do?
I should point out that if I open other programs in a session and then shut down the computer, it does start normally when I restart.The 4 times chimes is my old habit since os 7.5.3 sorry if that sound amusing to you, on apple sites 2 times is enough.
It will be the last option to do the re-installation.
But it usually help better, and you can narrow down the problem to other factor since the OS X is well installed and fresh.
I prefer install for the first time method, but you can choose archieve and install if you want to save your data there. Any method you choose make sure you back up your data before doing so.
But do you have a good connection in Thai, since I suggest you to update all the updater after you done the installation process.
Good Luck -
My new iphone does not start up
i bought the iphone6 yesterday and I opened it today. It does not start up and it shows just a low battery sign and then it turns black. What shall i Do?
Well, Apple's policy on the iPhone warranty outside of the country where it was purchased is:
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
So, it is likely that you will not be able to get it serviced here. However, it would be worthwhile to contact your local Apple Store to see if they will take a look at it for you.
Cheers,
GB -
Service created with New-Service does not start
Hello,
I am trying to create a working service using the New-Service cmdlet. I tried a bunch of different examples, I found on the internet like this one from technet:
new-service -name TestService -binaryPathName "C:\WINDOWS\System32\svchost.exe -k netsvcs" -dependson NetLogon -displayName "Test Service" -StartupType Manual -Description "This is a test service."
The service gets created and is listed in services.msc and Get-Service but I cannot start it. Ever. The state changes to "Starting" but that's all.
I tried it on different machines with different Windows- and PowerShell versions using elevated PS-consoles.
Thanks,
ManuelHi Manuel,
I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
Using Registry Editor incorrectly can cause serious problems:
In Registry Editor, locate, and then right-click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
d.In the Value data text box, type TimeoutPeriod, and then click OK
Refer to:
Error 1053: The service did not respond to the
start or control request in a timely fashion - When trying to start the server service.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
I just opened the box and charge the new ipad. it will not go to the home page. any suggestions?
If you're getting a screen of iTunes and a cable, then you need to activate it by connecting it to a computer that is running iTunes. Getting Started guide : http://support.apple.com/kb/HT4053
The manual, which can be downloaded from here http://support.apple.com/manuals/#ipad , also has a chapter on Getting Started
If you are not getting anything on screen then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear (a reset won't remove content, not that you've got any content on it if it''s new, it's the iPad equivalent of a reboot). -
New Playbook does not start up
i just bought a Playbook from Walmart.
The screen is black. When I charge it a red light stays on for a few seconds then turns white.then goes off (all in a few seconds)
Can anyobne help me start this new machine?
Has anyone received a broken machine from Walmart
BB custome\r support say I am not entitled to any free customer support!http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Play-book-wont-power-up-or-light-just-bli...
I saw this post is similar to your PB problem, you may get some information at this post. -
I purchased a new MacMini BUT not all the apps show in my purchased list on the App Store
I purchased the new mac mini that comes with lion and it started up and works very well, I signed on to the app store with my apple-ID and it downloaded the updates for GarageMand, iMovie, iPhoto and Facetime but even after several days, the the Lion app has not shown up... any idea how long till they realize that I purchased lion and allow me to install it on my other mac mini?
Just curious.Do the non-syncing songs play in iTunes on the computer?
-
i bought a new i pad and i want start to work it can not conneceted with i tune store
Apple's download and activation servers are being hammered because of the new iOS 7 released today. You'll just have to keep trying and/or wait until later.
-
Haven't used my Ipad in awhile? Will I need a new battery? Not starting up.
I haven't Used My Ipad in awhile...Does it need a new battery? Won't start up.
The best thing to do would be to plug into the power adapter and a wall socket and let it charge for at least an hour. Then try to crank it up. If you haven't used it for a while and the battery did not have a full charge, it may be that a recharge will do the trick.
-
I had this problem for a while now with small applications for OSX Mountain Lion that doesnt need to run installation. I can't start them, after double clicking nothing happens. When I do the same on another OSX computer they work fine. Does anybody know what I can do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
My new Iphone will not start up, when I go to charge it all it does is beep every 2 seconds
My Iphone will not come on, all it does is beep every 2 seconds.
Have you taken any troubleshooting steps?
Start by resetting your iPhone, hold both power and home buttons together for 15 seconds until the Apple logo appears, then let go and wait for iPhone to restart. You will not lose any information. -
New X220 will not start up when running on battery
I just received my new Thinkpad X220 4286CTO and found that when the computer is unplugged, I cannot start the computer after hibernation or shutting down.
The battery will charge just fine, and the laptop can run on battery just fine (drained from 100% to about 82% in two hours of use). When running on battery only, the computer can wake up from sleep. However, if I hibernate or shut down and then try to turn it on when unplugged, there is no response (no lights or anything). Then, when I plug the computer back in, it will turn on immediately (without pressing any keys), which surprised me. During this whole time the battery was between 80 and 100% charge.
One other quirk I noticed is that if I turn the laptop back on very quickly (press the power button within 5 seconds of finishing hibernating or shutting down), it will come back on, but if I wait more than 5 seconds, it is completely unresponsive until I plug it back in.
Has anyone else had this problem or know how to fix it? I will probably just send it back for possible motherboard / battery replacement, but I was wondering if there was anything I could try to fix it and avoid this. Thanks!I think you need to call support. Sounds like a defective battery or motherboard, as you suggested.
-
[SOLVED] new install Xorg not starting
I am running a vm install of arch and I cannot get startx to work. I went through the wiki section "Xorg as a systemd user service" and tried what it suggested and still it would not work. Below is my log file. Anyone have any suggestions? Thanks!
[herminio@archlinux-vm ~]$ cat .local/share/xorg/Xorg.0.log
[ 697.138]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 697.141] X Protocol Version 11, Revision 0
[ 697.143] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 697.144] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 697.144] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 697.146] Build Date: 10 November 2014 07:52:13PM
[ 697.148]
[ 697.149] Current version of pixman: 0.32.6
[ 697.152] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 697.152] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 697.156] (==) Log file: "/home/herminio/.local/share/xorg/Xorg.0.log", Time: Sat Nov 15 14:29:26 2014
[ 697.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 697.158] (==) No Layout section. Using the first Screen section.
[ 697.158] (==) No screen section available. Using defaults.
[ 697.158] (**) |-->Screen "Default Screen Section" (0)
[ 697.158] (**) | |-->Monitor "<default monitor>"
[ 697.158] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 697.158] (==) Automatically adding devices
[ 697.158] (==) Automatically enabling devices
[ 697.158] (==) Automatically adding GPU devices
[ 697.158] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 697.158] (==) FontPath set to:
/usr/share/fonts/misc/
[ 697.158] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 697.158] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 697.158] (II) Loader magic: 0x818d80
[ 697.158] (II) Module ABI versions:
[ 697.158] X.Org ANSI C Emulation: 0.4
[ 697.158] X.Org Video Driver: 18.0
[ 697.158] X.Org XInput driver : 21.0
[ 697.158] X.Org Server Extension : 8.0
[ 697.161] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 697.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 697.161] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 697.200] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 697.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 697.200] (II) LoadModule: "glx"
[ 697.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 697.245] (II) Module glx: vendor="NVIDIA Corporation"
[ 697.245] compiled for 4.0.2, module version = 1.0.0
[ 697.245] Module class: X.Org Server Extension
[ 697.245] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 697.246] (==) Matched vmware as autoconfigured driver 0
[ 697.246] (==) Matched vmware as autoconfigured driver 1
[ 697.246] (==) Matched modesetting as autoconfigured driver 2
[ 697.246] (==) Matched fbdev as autoconfigured driver 3
[ 697.246] (==) Matched vesa as autoconfigured driver 4
[ 697.246] (==) Assigned the driver to the xf86ConfigLayout
[ 697.246] (II) LoadModule: "vmware"
[ 697.246] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 697.280] (II) Module vmware: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 13.0.2
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "modesetting"
[ 697.281] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 697.281] (II) Module modesetting: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 0.9.0
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "fbdev"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 697.282] (II) Module fbdev: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 0.4.4
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) LoadModule: "vesa"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 697.282] (II) Module vesa: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 2.3.2
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 697.282] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 697.283] (II) FBDEV: driver for framebuffer: fbdev
[ 697.283] (II) VESA: driver for VESA chipsets: vesa
[ 697.283] (++) using VT number 1
[ 697.283] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 697.283] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 697.283] (WW) Falling back to old probe method for modesetting
[ 697.283] (WW) Falling back to old probe method for fbdev
[ 697.283] (II) Loading sub module "fbdevhw"
[ 697.283] (II) LoadModule: "fbdevhw"
[ 697.283] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 697.283] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 697.283] compiled for 1.16.2, module version = 0.0.2
[ 697.283] ABI class: X.Org Video Driver, version 18.0
[ 697.283] (EE) open /dev/fb0: Permission denied
[ 697.283] (WW) Falling back to old probe method for vesa
[ 697.283] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 697.284] (II) vmware(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 697.284] (--) vmware(0): DRM driver version is 2.6.1
[ 697.284] (EE) vmware(0): Failed to detect device screen object capability.
[ 697.284] (WW) vmware(0): Disabling 3D support.
[ 697.284] (WW) vmware(0): Disabling Render Acceleration.
[ 697.284] (WW) vmware(0): Disabling RandR12+ support.
[ 697.284] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
[ 697.284] (II) Loading sub module "vgahw"
[ 697.284] (II) LoadModule: "vgahw"
[ 697.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 697.284] (II) Module vgahw: vendor="X.Org Foundation"
[ 697.284] compiled for 1.16.2, module version = 0.1.0
[ 697.284] ABI class: X.Org Video Driver, version 18.0
[ 697.299] (EE)
[ 697.299] (EE) Backtrace:
[ 697.300] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593d36]
[ 697.300] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197e89) [0x597e89]
[ 697.300] (EE) 2: /usr/lib/libc.so.6 (0x7f1fe4f6b000+0x339f0) [0x7f1fe4f9e9f0]
[ 697.300] (EE) 3: /usr/lib/libpciaccess.so.0 (pci_io_write8+0x3) [0x7f1fe631a923]
[ 697.300] (EE) 4: /usr/lib/xorg/modules/libvgahw.so (vgaHWSaveColormap+0x5b) [0x7f1fdb2adfbb]
[ 697.300] (EE) 5: /usr/lib/xorg/modules/libvgahw.so (vgaHWSave+0x55) [0x7f1fdb2afd55]
[ 697.300] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f1fdeedc000+0x7dce) [0x7f1fdeee3dce]
[ 697.300] (EE) 7: /usr/bin/Xorg.bin (InitOutput+0xa9f) [0x47a28f]
[ 697.300] (EE) 8: /usr/bin/Xorg.bin (0x400000+0x3b65a) [0x43b65a]
[ 697.300] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f1fe4f8b040]
[ 697.300] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 697.300] (EE)
[ 697.300] (EE) Segmentation fault at address 0x8
[ 697.300] (EE)
Fatal server error:
[ 697.300] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 697.300] (EE)
[ 697.300] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 697.300] (EE) Please also check the log file at "/home/herminio/.local/share/xorg/Xorg.0.log" for additional information.
[ 697.300] (EE)
[ 697.308] (EE) Server terminated with error (1). Closing log file.
[herminio@archlinux-vm ~]$
Last edited by rican-linux (2014-11-17 07:45:54)Here are the packages I installed
[herminio@archlinux-vm ~]$ sudo pacman -Q | grep xf86-video
xf86-video-ark 0.7.5-5
xf86-video-ast 0.97.0-5
xf86-video-ati 1:7.5.0-1
xf86-video-cirrus 1.5.2-4
xf86-video-dummy 0.3.7-3
xf86-video-fbdev 0.4.4-3
xf86-video-glint 1.2.8-5
xf86-video-i128 1.3.6-5
xf86-video-intel 2.99.916-3
xf86-video-mach64 6.9.4-4
xf86-video-mga 1.6.3-3
xf86-video-modesetting 0.9.0-2
xf86-video-neomagic 1.2.8-3
xf86-video-nouveau 1.0.11-2
xf86-video-nv 2.1.20-5
xf86-video-openchrome 0.3.3-4
xf86-video-r128 6.9.2-3
xf86-video-savage 2.3.7-3
xf86-video-siliconmotion 1.7.7-5
xf86-video-sis 0.10.7-6
xf86-video-tdfx 1.4.5-5
xf86-video-trident 1.3.6-6
xf86-video-v4l 0.2.0-14
xf86-video-vesa 2.3.2-5
xf86-video-vmware 13.0.2-2
xf86-video-voodoo 1.2.5-5
I made some edits to the org.conf and now I am seeing this:
[herminio@archlinux-vm ~]$ startx
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
VMware: No 3D enabled (0, Success).
^Cxinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 896 requests (896 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
(EE) Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
Couldn't get a file descriptor referring to the console
[herminio@archlinux-vm ~]$ cat /var/log/Xorg.0.log
[ 2861.854]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 2861.854] X Protocol Version 11, Revision 0
[ 2861.854] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 2861.855] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 2861.855] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 2861.855] Build Date: 10 November 2014 07:52:13PM
[ 2861.856]
[ 2861.856] Current version of pixman: 0.32.6
[ 2861.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2861.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2861.858] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
[ 2861.859] (==) Using config file: "/etc/X11/xorg.conf"
[ 2861.860] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2861.860] (==) ServerLayout "X.org Configured"
[ 2861.860] (**) |-->Screen "Screen0" (0)
[ 2861.860] (**) | |-->Monitor "Monitor0"
[ 2861.860] (**) | |-->Device "Card0"
[ 2861.860] (**) |-->Input Device "Mouse0"
[ 2861.860] (**) |-->Input Device "Keyboard0"
[ 2861.860] (==) Automatically adding devices
[ 2861.860] (==) Automatically enabling devices
[ 2861.860] (==) Automatically adding GPU devices
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2861.860] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 2861.860] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2861.860] (WW) Disabling Mouse0
[ 2861.860] (WW) Disabling Keyboard0
[ 2861.860] (II) Loader magic: 0x818d80
[ 2861.860] (II) Module ABI versions:
[ 2861.860] X.Org ANSI C Emulation: 0.4
[ 2861.860] X.Org Video Driver: 18.0
[ 2861.860] X.Org XInput driver : 21.0
[ 2861.860] X.Org Server Extension : 8.0
[ 2861.863] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2861.864] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2861.865] (EE) systemd-logind: failed to take device /dev/dri/card0: Operation not permitted
[ 2861.886] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 2861.886] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2861.886] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2861.886] (II) LoadModule: "glx"
[ 2861.887] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2861.931] (II) Module glx: vendor="NVIDIA Corporation"
[ 2861.931] compiled for 4.0.2, module version = 1.0.0
[ 2861.931] Module class: X.Org Server Extension
[ 2861.931] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 2861.931] (II) LoadModule: "vmware"
[ 2861.932] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) LoadModule: "vmware"
[ 2861.959] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) UnloadModule: "vmware"
[ 2861.959] (II) Unloading vmware
[ 2861.959] (II) Failed to load module "vmware" (already loaded, 0)
[ 2861.959] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 2861.959] (--) using VT number 2
[ 2861.963] (--) vmware(0): DRM driver version is 2.6.1
[ 2861.963] (==) vmware(0): Depth 24, (--) framebuffer bpp 32
[ 2861.963] (==) vmware(0): RGB weight 888
[ 2861.963] (==) vmware(0): Default visual is TrueColor
[ 2861.963] (--) vmware(0): Min width 1, Max Width 8192.
[ 2861.963] (--) vmware(0): Min height 1, Max Height 8192.
[ 2861.964] (II) vmware(0): Output Virtual1 using monitor section Monitor0
[ 2861.964] (II) vmware(0): Output Virtual2 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual3 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual4 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual5 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual6 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual7 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual8 has no monitor section
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Printing probed modes for output Virtual1
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): EDID for output Virtual2
[ 2861.965] (II) vmware(0): EDID for output Virtual3
[ 2861.965] (II) vmware(0): EDID for output Virtual4
[ 2861.965] (II) vmware(0): EDID for output Virtual5
[ 2861.965] (II) vmware(0): EDID for output Virtual6
[ 2861.965] (II) vmware(0): EDID for output Virtual7
[ 2861.965] (II) vmware(0): EDID for output Virtual8
[ 2861.965] (II) vmware(0): Output Virtual1 connected
[ 2861.965] (II) vmware(0): Output Virtual2 disconnected
[ 2861.965] (II) vmware(0): Output Virtual3 disconnected
[ 2861.965] (II) vmware(0): Output Virtual4 disconnected
[ 2861.965] (II) vmware(0): Output Virtual5 disconnected
[ 2861.965] (II) vmware(0): Output Virtual6 disconnected
[ 2861.965] (II) vmware(0): Output Virtual7 disconnected
[ 2861.965] (II) vmware(0): Output Virtual8 disconnected
[ 2861.965] (II) vmware(0): Using exact sizes for initial modes
[ 2861.965] (II) vmware(0): Output Virtual1 using initial mode 1280x768
[ 2861.965] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2861.965] (==) vmware(0): DPI set to (96, 96)
[ 2861.965] (II) Loading sub module "fb"
[ 2861.965] (II) LoadModule: "fb"
[ 2861.965] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2861.965] (II) Module fb: vendor="X.Org Foundation"
[ 2861.965] compiled for 1.16.2, module version = 1.0.0
[ 2861.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2861.965] (II) Loading sub module "dri2"
[ 2861.965] (II) LoadModule: "dri2"
[ 2861.965] (II) Module "dri2" already built-in
[ 2861.965] (==) Depth 24 pixmap format is 32 bpp
[ 2861.966] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[ 2861.967] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[ 2861.967] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[ 2861.967] (--) vmware(0): Render acceleration is disabled.
[ 2861.967] (==) vmware(0): Rendercheck mode is disabled.
[ 2861.967] (--) vmware(0): Direct rendering (3D) is disabled.
[ 2861.967] (==) vmware(0): Backing store enabled
[ 2861.967] (==) vmware(0): Silken mouse enabled
[ 2861.967] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2861.967] (==) vmware(0): DPMS enabled
[ 2861.967] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[ 2861.967] (--) RandR disabled
[ 2861.981] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 2862.011] (II) vmware(0): Setting screen physical size to 338 x 203
[ 2862.235] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2862.235] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2862.235] (II) LoadModule: "evdev"
[ 2862.235] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2862.236] (II) Module evdev: vendor="X.Org Foundation"
[ 2862.236] compiled for 1.16.0, module version = 2.9.0
[ 2862.236] Module class: X.Org XInput Driver
[ 2862.236] ABI class: X.Org XInput driver, version 21.0
[ 2862.237] (EE) systemd-logind: failed to take device /dev/input/event1: Operation not permitted
[ 2862.237] (II) Using input driver 'evdev' for 'Power Button'
[ 2862.237] (**) Power Button: always reports core events
[ 2862.237] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2862.237] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2862.237] (--) evdev: Power Button: Found keys
[ 2862.237] (II) evdev: Power Button: Configuring as keyboard
[ 2862.237] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 2862.237] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2862.237] (**) Option "xkb_rules" "evdev"
[ 2862.237] (**) Option "xkb_model" "pc104"
[ 2862.237] (**) Option "xkb_layout" "us"
[ 2862.284] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event3)
[ 2862.284] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.285] (EE) systemd-logind: failed to take device /dev/input/event3: Operation not permitted
[ 2862.285] (II) Using input driver 'evdev' for 'VMware VMware Virtual USB Mouse'
[ 2862.285] (**) VMware VMware Virtual USB Mouse: always reports core events
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: Device: "/dev/input/event3"
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Vendor 0xe0f Product 0x3
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found 12 mouse buttons
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found scroll wheel(s)
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found relative axes
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found x and y relative axes
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Configuring as mouse
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Adding scrollwheel support
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: YAxisMapping: buttons 4 and 5
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2862.285] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/0003:0E0F:0003.0001/input/input5/event3"
[ 2862.285] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 7)
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: initialized for relative axes.
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) keeping acceleration scheme 1
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration profile 0
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[ 2862.286] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse0)
[ 2862.286] (II) No input driver specified, ignoring this device.
[ 2862.286] (II) This device may have been added with another device file.
[ 2862.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2862.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2862.286] (EE) systemd-logind: failed to take device /dev/input/event0: Operation not permitted
[ 2862.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2862.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 2862.286] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2862.286] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2862.286] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2862.286] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 2862.286] (**) Option "xkb_rules" "evdev"
[ 2862.286] (**) Option "xkb_model" "pc104"
[ 2862.286] (**) Option "xkb_layout" "us"
[ 2862.287] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "vmmouse"
[ 2862.287] (II) LoadModule: "vmmouse"
[ 2862.287] (II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so
[ 2862.287] (II) Module vmmouse: vendor="X.Org Foundation"
[ 2862.287] compiled for 1.16.0, module version = 13.0.0
[ 2862.287] Module class: X.Org XInput Driver
[ 2862.287] ABI class: X.Org XInput driver, version 21.0
[ 2862.287] (II) VMWARE(0): VMMOUSE module was loaded
[ 2862.287] (II) Using input driver 'vmmouse' for 'ImPS/2 Generic Wheel Mouse'
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 2862.288] (II) VMWARE(0): vmmouse is available
[ 2862.288] (**) Option "Device" "/dev/input/event4"
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: ZAxisMapping: buttons 4 and 5
[ 2862.334] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 2862.334] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_INIT
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_ON
[ 2862.334] (II) VMWARE(0): vmmouse enabled
[ 2862.335] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 2862.335] (II) No input driver specified, ignoring this device.
[ 2862.335] (II) This device may have been added with another device file.
[ 2862.336] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 2862.336] (II) No input driver specified, ignoring this device.
[ 2862.336] (II) This device may have been added with another device file.
[ 2865.760] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2865.883] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2866.184] (II) VMWARE(0): VMMouseUnInit
[ 2866.184] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: VMware VMware Virtual USB Mouse: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: Power Button: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.219] (EE) Server terminated successfully (0). Closing log file.
[herminio@archlinux-vm ~]$
Maybe you are looking for
-
Black ink cartridge will not print even after installing a new cartridge
my black ink cartridge is brand new and will not produce any print. The other 3 color cartridges are also new and they print fine. The set up cartridge is out of ink. Is it needed once the printer has been set up?
-
When I open my "fotos" (Photo) standard app in Iphone4 the the bar "Album is above the row with access to my photos taken - how do I solve this?
-
I have tried reconfiguring my mouse including downloading up to date drivers. The frustrating part is it works fine on laptop
-
How to connect MBA to Windows domain over Wi-Fi?
Hi. I`m on a university campus. MBA automatically picks up wi-fi connection, which is great. Because MBA does not have an Ethernet port, how do I join my office's Windows 2003 network domain over Wi-Fi? Thanks for any help I can get!
-
How to Split 1 Order into Multiple Deliveries based on Partner Function ?
Hello, How can I split one Sales Order into multiple deliveries, based on the partner function "managed by" ? The requirement is that one order will be created for different "managed by". If partner function "managed by" is same at line item level in