My new MBP can't see my Time capsule

Hi
Thanks for any help with this :
I use my capsule about once every 2 weeks to back up the MBP.
Have a new MBP and wanted to back it up for the first time. The MBP is running 10.7.2.
It could see the Time Capsule originally but said it needed a firmware update as its an original 1TB capsiule:
I don't have the capsule connected to the internet directly because I just don't like the idea of that.
When you'd disconnect the MBP from the internet WiFi, to connect to the Capsule, the capsule would say it needed an update - HOWEVER when you'd connect back to the WiFi network then airport utility didn't see a capsule to see a need for the firmware update:
My questions are:
1) can you download the firmware manually.
2) can the USB slot be used for connecting to the computer ??? It seem not to be possible as nothing comes up on the computer when the two are connected
I tried other strategies like setting up the Capsule on the house WiFi - now the MBP can't see the Capsule at all at all, ----green light on, soft resets done, USB in the back.
The only thing I havn't tried yet is to get an Ethernet cable - years since I had one and lost. Guess I'll have to go out and get one
Thanks
Tom

partial solution - hold the reset button down for longer than one sec, held it down for 5-6 sec and this reset the connection info to default so the computer could see it again.
Getting the firmware onto it remained a larger problem.

Similar Messages

  • Intermittently can't see the time capsule

    Greetings! For the past little while, my Macbook Air is intermittently losing the Time Capsule under "shared" in my computer. We have another Macbook Air, and a couple PC's in the house and they never drop the Time Capsule. We have named the Time Capsule, and so when you look under "shared" in the working Macbook, you'll see the Time Capsule as we have named it, then when you click on it, you'll see the Time Capsule which you can click on the see the files. On my Macbook, the named Time Capsule is usually there, but now and then, it just won't show. A restart doesn't seem to be a reliable fix. It's a strange problem. Does anyone have any ideas why this could be happening? Thanks very much! 

    First of all the TC has to be connected in bridge usually or at least so the computers are behind it's NAT if in router mode.. does the PC get the same IP range as the TC?
    Then ping the TC to make sure it is not blocked by firewalls.. if the PC is set to homegroup for instance then you may have issues. And networking is set on the PC to home.
    I presume you have access to the TC setup via a Mac..
    1. The default TC name is usually not compliant with SMB network names.. nor is wireless name.. so reduce all names to short, no spaces no special characters.. passwords can be longer but still no spaces no special characters.
    2. You haven't said if access is wireless or wired but guessing wired and you want disk access, go to the disk page sharing in the TC and set WORKGROUP.. to same name as PC. Also it is usually easier to turn on the guest account to have read write access. In your work situation maybe.. maybe not.. anyway that depends on how it will be used. You can also change the security to user passwords but that will stop all existing access to files.

  • My PC (Windows) can't see my Time Capsule wireless Network

    I just installed a wireless network with a Time Capsule and it's working fine for the three Macs and the printer in the household.  However, I still need to have access to the wireless network for one PC running Windows.  Problem is the PC doesn't "see" the Time Capsule Network.  What am I missing and how can I set up the PC on the wireless network?

    Try downloading AirPort Utility for Windows here:
    http://support.apple.com/kb/DL1391

  • Can not see the Time Capsule disc in Time Machine what can I do??????

    I just set up my new TC with my MacBook Air. The Wireless network is working fine but I can not find (see) the TC hard drive on my MacBook air so I can not set up Time Machine to back up my stuff. :=(
    Can someone help me with this... ?

    As it was in the beginning, is now and ever shall be, world without end.. amen!!
    Welcome to ML excellent standard networking.. I am awarding it the golden vista OS of the year.
    Did you turn it off and on again??
    Will no longer be the first phrase of all windows servicing.. it now extends to Macs as well.
    Maybe an auto electrical clock where you setup a timed daily reboot.. !!
    A mechanical one of course.. cannot trust those electronical versions.. they might use OS as reliable as Vista!!

  • I can't see my time capsule in the finder menu

    I just bowgth a new airport extreme time capsule 2T and it´s working fine with the wireles network but I can select it in the finder menu to use it as a back up disk. ¿why?

    That's not the way of setting up your Time Capsule as a backup disk.
    Instead, you need to set up Time Machine. Open System Preferences > Time Machine > Select Disk, choose your Time Capsule and your Mac will start making backups to your Time Capsule.
    Also, are you sure you have bought an AirPort Time Capsule? Maybe you have bought an AirPort Extreme, and this one does not come with a hard drive, so you cannot see it in the Finder sidebar to copy files to it

  • HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

    i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
    . .....but i couldn't find the time capsule from airport utility..... why?

    Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
    You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
    http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
    See page 12.

  • Updated to Airport Utility 5.3.2 - now can't see my time capsule disk!

    I updated to 5.3.2 of the Airport Utility through software update but, after rebooting both my Mac and Time Capsule, I can now no longer access my Time Capsule's disk. Airport Utility says 'no disks found'
    A similar thing happened after the update to 5.3.1 but I could still see the disk in Disk Utility, and once I'd verified it, it all worked OK again.

    Okay guys. I called apple support, and the guy there fixed it for me. Reset the TC, and go through AirPort Utility again. The disk is there! Very happy that it was that easy, but bummed that they let the firmware go out like that. Seems like they'd catch that sort of thing.
    The support guy was great, though. Very quick.
    Good luck, hope this works for everybody!
    -B

  • I can't see my time capsule hard drive anymore

    I have a macbook pro connected to time capsule (1tb) and a printer. I can access the internet and can print but my machine has stopped backing up and cannot find the time capsule hardrive anymore. I have tried resetting everything (several times) to no avail. Help!

    Open a Finder window and look for your TC in the sidebar, then click on it. It will then display one of the following messages: "Connected as <your user name>" or "Connection failed." If it's the latter, click on the "Connect..." button and enter the TC password. Make sure the checkbox for "Remember this password" is selected before you hit OK.
    Once this is done, your backups should work. Your TC should be connected whether or not it's mounted on the Desktop, even after you logout/login or restart or even wake up from sleep.
    Hope this helps.

  • Can not see my time capsule in airport utility

    I was trying to add a password so my time capsule could access ATT for internet and during the process it disappeared from the airport utility on my MAC?
    I've tried resetting both devices, but it won't come back to the utility so I can configure it.  Rescanned several times.

    Remove any other connection to the TC except one computer by ethernet. Press the reset again, and hold it for 10sec and wait for the TC to restart.
    Restart the airport utility. If it fails to find the TC try plugging it into a different computer.
    If the issue follows the TC take it to Apple Genius to be checked.

  • By accident i pressed the forget button on aiport utility and now i can't see my time capsule?

    what can i do? :/

    partial solution - hold the reset button down for longer than one sec, held it down for 5-6 sec and this reset the connection info to default so the computer could see it again.
    Getting the firmware onto it remained a larger problem.

  • Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17).  Help

    Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17).  Help!

    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
    Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
    Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
    Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
    Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
    Quit Keychain Access and try again to back up.

  • I'm using iPhone 5s, I can't see face time in my settings

    I'm using iPhone 5s, I can't see face time in my settings

    Can you purchase a new iPhone in India that has FaceTime - yes.
    Can you take your current iPhone to India to download FaceTime onto it - no.

  • New Mavericks install. Can't access old time capsule :(

    I've been running Mountain Lion since January 2013 and have had my Time Capsule / Time Machine set up since.
    I just reformatted my computer's drive to install Mavericks and I forgot to backup my iTunes Library.
    I did NOT unplug timecapsule during the whole reformat / Mavericks install process.
    In Mavericks, I enabmed Time Capsule and found that I have 2.75TB free of 3TB and that the oldest backup is Jan 2013.
    Has my time capsule drive been formatted? my iTunes library alone is probably 50GB.
    Is there a way I can access my old Time Capsule backups so that I can restore my iTunes Libarary??
    -Frank

    In Mavericks, I enabmed Time Capsule and found that I have 2.75TB free of 3TB and that the oldest backup is Jan 2013.
    Has my time capsule drive been formatted? my iTunes library alone is probably 50GB.
    Is there a way I can access my old Time Capsule backups so that I can restore my iTunes Libarary??
    -Frank
    Not looking good.. if there is 2.75TB free hardly any of the TC has been used.. it is unlikely the format changed anything.
    Attempt a migration of the itunes..
    http://pondini.org/OSX/MigrateLion.html
    We don't have details of Maverick of course but it should be very similar to Lion or ML.
    Other than that then I have to say your chances are slim..
    If you are sure the iTunes was backed up and you checked the disk usage before you reformatted the computer and know it was using at least as much space as the hdd in the computer then you could pull the hard disk from the TC and use a software like data rescue 3 to see if there files were deleted..
    Did you allow a new TM backup to start.. that could wipe out the original backup?
    Other than that.. recovery on the disk is not possible if you reformatted instead of upgrade installed.
    Sorry to be the bearer of bad news.

  • After port forward, airport utility can no longer see my time capsule

    I tried to forward public port 1025 to private port 80 on a raspberry pi using  airport utility. But after I did that,  the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
    Thanks,
    Michael

    It doesn't sound like a port that is used.
    From the standard google search.. nope.
    Reboot the whole network..
    No luck tell me what OS version you are running the utility on and what model and firmware TC???
    Note with Yosemite, anything can and will happen.

  • Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

    Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable. 

    Hi CJR
    I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
    Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
    TC will back up until full and then begin deleting the oldest back-ups.  Mine is a 2TB Time capsule.
    My back-up plan is as follows:
    1.  Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
    2.  Contacts, reminders, appointments, notes, email are backed up through iCloud.
    3.  iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
    4.  Photos are on my MacBook Air and are backed up on my HP external drive.
    5.  Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS  cloud and my old PC and does not alter their native format like storing in iCloud would do.
    Cheers

Maybe you are looking for

  • My Macbook Pro is too slow!

    I am only running Firefox, Papers2 and Pages and 3.99GB of my 4GB ram is being used up. A detailed description of my system I took with EtreCheck is below. There is a kernel task that is using a lot of my memory, does anyone know what this is ? I hop

  • Safari Hangs and Can't Sync or backup My iPhone Windows XP on PC

    I had this problem where I could not Sync my iPhone because it could not backup and at the same time, my Safri would open but just hange. This happend after doing some Widows updates and Safari and iTuines updates.The CPU usage went up to 50% for Saf

  • Simultaneous volume failing

    Hi, I have 2 Seagate FreeAgent GoFlex 1.5TBs. Recently, one of the partitions on one (I'll refer to it as the first one) won't show up in Finder, but still would show up in Disk Utility (although grayed out). Therefore, I hit "Repair Disk", and it sh

  • Error in reading Text by CRM_ORDER_READ -- ET_TEXT

    Hello experts, I am reading text from structure ET_TEXT in FM CRM_ORDER_READ for a transaction, however, when it comes across the symbol '&' in the text it reads it as '<(>&<)>'. Can anyone shed any light on this? Thank you, Khushboo

  • Newb Question for burning DVD/CDs

    I have an external DVD writer on my iMac. I got the thing last month and an completely new to Apple (sorta) Now how do I make a data CD and DVD? On Winblows XP all I need to do is select the files, right click and click on SEND FILES TO CD for making