My new Mini DVI to VGA apapter does not fit into MacPro port

I have a 2010 Mac Pro and just got a the Mini DVI to VGA adapter so I can connect it to a projector. The mini-dvi port however seems to be too small for the adapter. What should I do?

MeeceDO2015 wrote:
What should I do?
Return it for one that is compatible with your mac.

Similar Messages

  • Mini dvi to vga adapter doesn't fit Mac Book port

    I bought a "mini dvi to vga" adapter at the local Apple store at the mall and it does not fit the mini DVI connection on my Mac Book. What is the correct mini dvi configuration or part number for the Mac Book Mini dvi port?

    It may be. I threw the bag out so I can't check. I was in a hurry and thought I picked up the right adapter but guess not.
    Thanks for your help. Know anyone that needs a mini vga to vga adapter?

  • I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

    The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2.  Has anyone seen anything like this before? I've included a picture

    You can return a new Mac within 14 days of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.

  • Getting "Table %TEMPLATE does not fit into window" error

    Hello,
    I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
    This only happens when I go to that printer.  I can print fine to a laser printer.
    I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
    I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
    Has anyone seen this before?  Please help.   Thanks.

    Hi James,
    You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
    What ever you create should be within this width and height .
    So accordingly adjust the width and height of your windows and components within them
    Regards,
    Dep

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

    While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
    Can someone help us in resolving this
    Thanks and regards
    RS

    Please expand the log also please check the SAP note 1835436
    Regards
    Aneesh

  • Table does not fit into window.

    Hi Guys,
    When I execute the Smartforms I get this message ? '
    "Table does not fit into window."   any guess why this message ?
    Regards

    >
    P R Raghu wrote:
    > "Table does not fit into window."   any guess why this message ?
    > Regards
    If TABLE does not fit WINDOW try to take it through the DOOR LOL
    Doesn't the error seems self explanatory to you?
    Regards
    Karthik D

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Template does not fit into the window

    Hello all,
    <b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
    I am getting the above error in when i try to preview my smartform.
    The template is in footer window. I have only 3 lines in the template.
    And the size of template is less than window size.
    I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
    If you have any suggestions Please help.
    Thanks.

    Hi,
    Please check the following points:
    1. Font size and font family.
    2. Line spacing
    3. Allignment.
    4. Left and right margin
    Deserve Rewards.
    regards.

  • Using external Display via Mini-DVI to VGA Adapter does'nt work

    Hey Guys,
    i recently bought a mini-dvi-to-vga adapter.
    When I plug it into my macbook and connect it to my 19" external TFT, the MB recognizes the TFT as [Medion] MD30219PH but the display stays blank (no matter if i choose mirroring mode or extended desktop)...
    Already changed the Hz-Rate between 59.9, 60 and 75 Hertz and the Resolution also... but nothing happens.
    In extended Desktop mode i can even slide the cursor into the area where the display is supposed to be...
    Hope u can help me
    thx

    From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
    -Brian

  • Mini DVI to VGA cable won't fit.  Too big for slot on 12 PowerBook G4

    Are there more than one type of cable?

    http://support.apple.com/kb/HT2369 shows only one kind of mini-DVI port for the 12" Powerbook.  Sounds like you got something that is not an mini-DVI port based cable.  Mini-VGA cables look very similar, and can be misidentified.  What are you connecting to from the Powerbook G4?  Make, model # is important.  Often DVI-HDMI adapters are better than DVI to VGA if there is an option.  Cause DVI-VGA you need a proper digital/analog converter in the cable in question.

  • 3.3V CardBus Card does not fit into T500?

    I got a new T500 2055WVJ last week with Win 7 64bit.
    I have only one problem. The cardbus slot (it must be one, because the device manager says RICOH compatible CardBus controller) does not like my Adaptec SCSI CardBus card (Type II). Other PCMCIA cards (5V, non Cardbus) in the same slot fit in perfectly, but the 3.3V SCSI card goes in but stops about 5 mm before they is completely in. The same card works in all other laptops including my old T60, where is slides in and is recognized perfectly. Also CompactFlash cards inside an PCMCIA adaptor fit in perfectly on my new T500 and appear as ATA devices.
    Looking into the slot with a lamp shows that on the left side, the notch for differentiating between 5V and 3.3V cards only allows 5V cards. But the CardBus spec says, that Cardbus cards must be 3.3V. You can see a picture of the difference between cardbus and pcmcia pccards here: http://de.wikipedia.org/w/index.php?title=DateiCCard_CardBus.jpg&filetimestamp=20061112220451 (you see the different notch on the right side).
    So whats wrong here? Does the new Thinkpad really does not like 3.3V CardBus cards, although the controller is CardBus?
    Solved!
    Go to Solution.

    Congrats on getting it to work!
    Thinking back, I remember how reluctant I was to force a card into my new T500. I do think there is something slightly off about the slot, because the same card had been working fine in my old T42. (Or maybe the T42 was similarly stiff when it was new way back when?)
    Anyway, congrats again!
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • My Iphone Touch 4rd gen does not fit into Bose system

    I got me a new Ipod touch 4rd gen. Now it doesn't fit into my Bose system? Also not in my daugters Sony?
    Cable fits and it charges.

    If the docks use the universal dock system then you need to purchase these:
    http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc
    Otherwise you can use a dock extender cable or use a knife and tape or similar to make the iPod fit.
    Cable:
    http://www.amazon.com/Connector-Extender-Extension-Cable-iPhone/dp/B004BJLXAM

  • Airport Extreme Card does not fit into my laptop.

    I recently purchased an Apple iBook G4 and a separate Airport Extreme Card. Maybe I'm just Mac-illiterate, but I can't figure out how to install the card. I've studied the directions in the manual and online but the diagrams don't seem to correspond with my laptop. For example, my laptop does not have the grey wire or metal bracket that are shown in Figure 6 at http://www.info.apple.com/usen/cip/pdf/ibkg4/ibg4-apc-cip1.pdf. In fact, that whole area in my laptop looks very different from the way it looks in the image. The card doesn't fit/snap in anywhere under the keyboard.
    Am I totally missing something? Is the card supposed to be installed elsewhere? Did I perhaps purchase the wrong card?
    Any support you can offer will be greatly appreciated. Hopefully my question isn't too stupid!

    Current generation iBook G4's have a built in Airport Extreme interface - they don't make use of a user-installable Airport Extreme card.
    Does your Mac have an Airport menu item (the fan-shaped icon near the right side of the MacOS menu bar)? If so, it already has an installed Airport interface.

Maybe you are looking for