My new MP doesn't see LMP bluetooth numeric keypad

I just got my new Mac Pro and I'm quite excited with it... But I can't make my LMP Bluetooth numeric keypad working...
The bluetooth keyboard and trackpad matched regularly, but MP doesn't see the LMP. I tried in all ways but... none...
Any help please?
Thanks

Hello mnstudio,
The following article provides some useful steps that can help get your numeric keyboard paired with your Mac Pro.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Cheers,
Allen

Similar Messages

  • Belden Bluetooth Numeric Keypad and FCP X

    Hello all.
    Just a question about FXP X and multiple Bluetooth keyboards
    Belden has lauced a Bluetooth numeric keypad.
    http://store.apple.com/uk/product/HD389ZM/A/belkin-wireless-yourtype-numeric-key pad-for-imac-and-macbook
    Used in conjunction with the Apple Bluetooth keyboard it makes a wireless replacement for the big wired Apple keyboard.
    My question is this.
    How does FCP X deal with multiple Keyboard devices with regards to mapping FCP X commands to buttons inside the Command editor?
    Has anyone tried this ?
    Can you map to the keyboard and not the keypad,,,, or is it like..  suddenly you have a large wireless keyboard only split in two ?
    Regards Nils M Alexandersen

    Hello:
    Before you return it, try a couple of things:
    1.  Reset the SMC.
    2.  Reset the PRAM.
    If that does not help, take it back for replacement.
    Barry

  • New laptop doesn't see iPhone after user import from old laptop

    Transferred my user account from my MacBook to new MacBook Pro, and now the MBP doesn't see my iPhone. Anyone else have this issue and know the solution? I don't mind wiping and restoring the iPhone. (Though I'd prefer not to.)
    BTW - deleted my account and all files from the MacBook prior to verifying my iPhone works on the new MacBook Pro. So I can't "go back" to my old machine.

    Once again, I answer my own question... Leaving the iPhone plugged in during a restart worked.

  • New iMac doesn't see old iMac data on Time Capsule

    I have a brand new iMac - my Time Capsule doesn't see my backup, it sees my Mac Book Pro backup but not old iMac (which is broklen, hence new one from Apple). I can see old iMac data is there through browser but not seen by Migrate assistant. Any ideas?

    Look at manual resstore methods.. I would be careful migrating to a later OS.
    Q14-17 in pondini.
    17 in particular.
    http://pondini.org/TM/FAQ.html

  • New MBP doesn't see HDV Camcorder

    I have a new 17" MBP that doesn't see my Canon HV10 connected via firewire. Neither imovie HD or FC Express HD report seeing the camera. I've read the many articles/discussions here. I am using the correct firewire connection. I've tried the camera in many modes playing many tapes.
    Is there a way to tell if the firewire port sees anything connected? I'm down to trying to figure this out at the most basic level.

    You might get more responses posting your question on the iMovie and/or Final Cut discussion boards.
    http://discussions.apple.com/category.jspa?categoryID=141
    http://discussions.apple.com/forum.jspa?forumID=936

  • New Mac doesn't see library

    Howdy.
    My iTunes library is on an external hard drive.
    I have iTunes Match.
    I had been using with Mac Book, and realized would make a lot more sense to use Mac Mini, since I wouldn't have to haul the external drive around.
    Logged into iTunes on Mini.  Pointed Advanced Preferences to my external hard drive, and the iTunes folder.
    Doesn't see my files, and instead considers everything to be only in the Cloud.
    I know from past (bad) experience that if I download again, they'll all be duplicated.  How can I get iTunes on this Mac to realize that my music is physically there?
    Thanks!

    thanks Tony,
    I clicked on the Library and that did it .. (I never found the "switch libraries" menu item) but this worked great ...
    but just to give a complete solution ... I was looking for a option to use 2 screens and decided to look in the Preferences file and at the top was an option to designate a library .. to point to one. I guess I needed to look a little harder... thanks for your time and help,
    ana

  • My macbook Pro doesn't see my bluetooth headphones

    Hi, I got a new macbook pro and I am using Sony DR-BT21G headphones, these are bluetooth indeed. The problem is that my macbook does not see my headphones when I am trying to set it on my Mac. The headphone does not work more if I enter the IP of my headphone manually.
    I hope you guys will be able to help me.

    Nobody answered me, I discovered a way to do it by myself.
    Specify the device and hold the finger on the headphones.

  • New iMac doesn't see Apple TV, but Macbook does

    Until yesterday I was using my Macbook Pro for the Apple TV. Last night I moved all my content over to my new iMac (copied actually) and I want to start using the iMac for Apple TV. (once everything is set up I will just wipe the content off the MacBook.... 96GB is too much for a laptop!)
    Currently the iMac isn't seeing the Apple TV, but the Macbook Pro is. Do I need to remove the Apple TV from the Macbook in order for the iMac to see it? I am just hesitant to try it because there is a warning message that everything will be erased from the Apple TV if I remove it. I am pretty sure everything is on the iMac and therefore wiping the Apple TV won't cause me to lose anything... but I would rather know if this is the solution before I do something like that!
    Thanks

    Thanks... I was just getting ready to ask a new question I followed the Help guide's instructions to do Settings > Computers > “Connect to iTunes” but we can only stream now with that. So thanks for the response, it helped me to know what was going on there. Now I am going to go see if I can figure out how to do what you suggested.

  • New iTunes doesn't see all music in iTunes folder

    I recently upgraded to iTunes 9.1.1.12. Since the upgrade, I notice that it only shows a portion of the files in the iTunes folder.
    I can see them when I open the folder in Windows Explorer.
    I haven't/don't receive an error message.
    How can I correct this?

    From Germany with not perfect English:
    I had similar problem. Files that were not transferred had either no file-ending (.tif and .jpg-files without these endings are not synct) or a wrong ending (.pdf for example).
    And the Apple-Hotline told me, a next iPod-software-update would allow a better sorting photos on the iPod. (Actually you can not use folders in folders, and all Photoes are sorted by date; a little help may be a count-number at the beginning of the file-name: 01.... 02.... 03... This helps, however it is not a good work for so many photos as you have.)

  • Brand new Airport doesn't see disk

    This is odd; I had a USB disk attached to my "N" Airport for a while and it worked just fine, then, it stopped working.
    The Airport logs don't show anything about a disk and no errors of any kind beyond housekeeping stuff. And if I connect the disk and restart the Airport there's no activity from the disk light when it boots that would indicate the drive gets any signal at all.
    AND it works just fine when it's attached to my MBP.
    And a USB printer shows correctly, so it's not a question of the USB port being bad.
    What's going on here?? I ran the disk utility and checked it for errors while attached to my MBP and I reformatted it with MacOS as per setup instructions.
    This is very weird, and I'm not at all sure that it didn't happen with an Airport firmware update (or, not).

    I'll answer my own question here.
    The brand new Airport I have used to recognize an sata drive in an external 2.5" enclosure. Then it stopped recognizing it, some time ago, for no apparent reason.
    I borrowed a couple of other external enclosures and tried them on the Airport and one works, three do not, although all of them work on my Macbook.
    My conclusion here is that Apple's USB port isn't quite up to standard.
    Apple, please fix this, and while you're at it would you consider allowing the Airport to power down the external drive if it's not used for a period, in the interest of the environment? I realize that this is heresy for network storage devices but I don't think too many of these are in data centers and the time it takes to power up a drive before you can write to it is probably acceptable to your average home user.
    Thank you in advance,
    Faz

  • Just purchased a WKP-1314 bluetooth numeric keypad and not working

    Just purchased a Apple WKP-1314 for my new IMAC,
    Followed the instructions and it paired right up and then lost connection, then connected and then lost connection.
    Trying to find out if some else has had this problem with the unit before I make the 35 minute ride back to the store.
    Searched this site for it found nothing hoping others are using it or tried to get some inout thank you.

    Hello:
    Before you return it, try a couple of things:
    1.  Reset the SMC.
    2.  Reset the PRAM.
    If that does not help, take it back for replacement.
    Barry

  • New iMac can't see Laserwriter Select connected to a PC on same LAN-- why?

    I've just returned to the Mac universe after a five year hiatus. When I discovered how well Macs play with PCs and Unix these days, I decided to come back.
    There's just one issue: I can't print to my Laserwriter Select 360, connected by parallel port to a Windows XP Pro PC on my LAN. My new iMac doesn't see the printer at all. The imac does see the PC's workgroup in the Network Neighborhood, and I can mount the shared volumes of that PC on the mac with no problem, so the Mac can talk to the PC for filesharing, anyway. (smb:// address used)
    Applecare has no clue why I can't see the printer. They told me to turn on Windows Sharing and Print Sharing, but that had no effect. The Windows machines on my LAN can all see and print to the shared Laserwriter Select 360, no problem. They're all running Windows XP pro, latest patches.
    The iMac of course has the latest Tiger. All machines are on my internal subnet 192.168.0.*.
    I just got a new cartridge for the Laserwriter, and there's no reason to retire it-- that printer works great. I just can't believe/accept that the iMac can't be made to print to an Apple printer! (Also, I've heard that appletalk->ethernet bridge solutions are flaky so that's not an ideal route).
    Any/all ideas welcome.
    imac g5   Mac OS X (10.4.3)  

    Here's the result. The PC is on 192.168.0.2, and the iMac was assigned .18 by DHCP.
    I just tried adding a lexmark printer to the PC (over USB) to see if there might be some difference. The other windows box on the lan sees the LexMark same as it sees the Laserwriter (and both show up in the output of smbclient below). Needless to say, the iMac doesn't see the LexMark either.
    Thanks for your help with this one...
    will-kesslers-imac-g5:~ willkessler$ smbclient -NL 192.168.0.2
    Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
    Sharename Type Comment
    My Documents Disk
    IPC$ IPC Remote IPC
    print$ Disk Printer Drivers
    SharedDocs Disk
    AppleLas Printer Apple LaserWriter Select 360
    Downloads Disk
    My Pictures Disk
    ADMIN$ Disk Remote Admin
    C$ Disk Default share
    Printer Printer Fax via eFax 3.5
    LexmarkX Printer Lexmark X63
    session request to 192.168.0.2 failed (Called name not present)
    session request to 192 failed (Called name not present)
    Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
    Server Comment
    Workgroup Master
    --------- -------

  • Skype for Windows doesn't see my Samsung WEP200 bl...

    I paired a Samsung WEP200 bluetooth headset with the USB bluetooth adapter on my Dell Inspiron 6400 laptop running Windows XP Pro SP3 32 bit. When I select "Show Bluetooth Devices" from the Bluetooth dropdown menu, I see "Audio devices/WEP200/Passkey enabled" but Skype ver. 5.5.59.124 doesn't see the bluetooth headset at all, neither the "speaker" nor the "mic". Do I have any hope of getting it to work? TIA.

    Out of curiosity, do you have any "mirror" driver installed - i.e., something like PC Anywhere or RAdmin or other package designed to allow someone else to control your user interface?  These are known to get in the way sometimes.
    There is a registry tweak to force Photoshop to use the OpenGL features of your video driver.  It's for diagnostic use only, but it could serve as a workaround until you can get to the bottom of the driver problem (perhaps it will be solved in an upcoming release of the ATI drivers).
    Some of the information in this thread might help you:  http://forums.adobe.com/message/2954477
    Note that the registry tweak is good for diagnostic purposes, and enabling GPU acceleration where Photoshop does not believe the driver can support it can lead to instability and crashes, with loss of data.  It will be interesting to know whether the ATI mobility drivers can support proper OpenGL operation on your system.
    -Noel

  • Curve doesn't see Outlook

    The desktop s/w (v4.3) for my new Curve doesn't see Outlook on my PC, so I can't sync any of my data.  I'm still using Outlook2000, but the old BB desktop s/w used to work with it just fine.  Any ideas?

    4.3 Does not support Outlook 2000.  If you want to use 4.3, you will have to upgrade to Outlook 2003 or 2007.  If want to stick with Outlook 2000, you will have to uninstall 4.3 and reinstall 4.2.

  • Numeric keypad quit working and does not connect to the bluetooth

    my wireless bluetooth numeric keypad is not connecting

    Hello Gneel01,
    I found an article with steps you can take when you have issues with a Bluetooth device not connecting.  I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Why can't I get the image to view larger when you click on a thumbnail?

    I thought that there was a way to have the image open up larger in a new little window when you click the thumbnail on a photos page....when I click a thumbnail on my photos page it takes me right to slideshow view and the images are displayed too sm

  • [VIA] recommended memmory for kt6-delta

    im looking forward in buying 2 sticks of 1gig DDR400 memory. any recommendations is highly appreciated. thanks.

  • Level Based Measure

    Hi, I have a situation, where I need to Push a metric in answers/ dashboard to RPD ( sum ( Dollars )/sum of ( Dollars by Month)) My Fact table grain is Per month per account. I have a descreptive Field in fact table, ( Varchar(10) field) On which i n

  • Single and multi byte settings

    Hello, We are trying to implement multibyte char loading and I have a few questions: 1) Our current char coding is in UTF-8. What char coding should we use for multi byte loading? 2) In DDL, the column can be declared as a BYTE or CHAR, such as varch

  • Maximum number of partitions allowed per table.

    Interesting findings with interval partitioning: SQL> SELECT  *   2    FROM  v$version   3  / BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE    11.2.0.3.0      Productio