My new Nokia E 5 does not focus well, HELP!

Hey all I have bought Nokia E5 just couple of weeks ago. Camera does not focus well and the pictures are not clear. 3.2 MP Camera of my nokia N93 was alot better than its(E5) 5 Mega Pixel. Nokia should sort this out, they should have checked it before introducing in the market. I want NOKIA to sort this out OR REPLACEMENT!!!!! Can any one help me with this?

I don't own an E5, but assume you know its camera uses a different focusing technology than most other Nokia phones, EDoF (Extended Depth of Field)?  Before deciding your camera is faulty, please read about how it was designed to work: http://www.allaboutsymbian.com/features/item/Camera_Nitty_Gritty_Supplemental-EDoF.php .  Hope that helps.

Similar Messages

  • E5 - Camera does not focus ? Help.

    hi,
    I don't know why the camera on my E5 doesn't focus well. Cause when you usually point at something, the focus always starts to ... focus, but this doesn't. At all. Am I missing anything, cause it can't be this bad, right?
    Any ideas?
    thank you!

    E5 camera does not focus, the quality of images is very low and have jagged edges. Though E5 has 5 megapixel camera, the images are no match to the images of my 2 megapixel - N97.
    Nokia should have rectified this problem before releasing it. It must recall these mobiles and fix the problem. Will they?

  • E71 - Nokia PC Suite - does not connect ? unable t...

    I installed Nokia PC Suite (v7.1) on my PC's:
    Connected Nokia E71 with USB-cable
    (Mass Storage > Via Windows Explorer  I can see the directories on the memory card of the E71)
    Problem-1: Nokia PC Suite gives error: "unable to find device"
    (while phone is unlocked, USB mode is not applicable)
    Problem-2:  Also Nokia Software Updater does not work (cannot find device)
    Happens both on XP and Vista PC.
    In other words... I can't access my E71 at all. Who knows a solution ?

    Hi, i just ran into the same problem with the "Device Not Found" I will give the steps for what fixed  my problem.
    Connect the phone to your computer via data cable. Select "Connect Pc to Web". Then, inside the folders run the installer.exe** and select Repair instead of Uninstall. Now your device should work like a charm.
    **If the installer.exe interrupts you saying that the version installed on the computer is newer than what you are trying to install and exits itself, you will have to go to control panel to uninstall Nokia Pc Suite and reinstall it with the phone you plan on using so it will be the correct version. Even after you reinstall Nokia Pc Suite you may have to run the installer.exe a second time and select repair before it will work. I did anyways.
    I hope this fixes your problems you are having. Also the reason it is hard to get tech support for stuff like this is because when you can connect your mobile internet to the pc you can use a lot of data because you have more access to things. Eventhough you may have an unlimited data plan most if not all companies will ban your phone possibly without notice if you use more data then they want you too. Also tethering, which is what we are all trying to do. Is illegal for most if not all phone companies. Always best to read the Terms and Conditions.
    As far as the USB not beeping when connecting the cable. I didn't hear mine either but it worked but if yours isn't working try this: Start -> Right-Click Computer -> Properties -> Device Manager-> Check all USB devices to  make sure they are working properly and you may need to reinstall them.
    Please reply to let me know if anything worked. If it did please check solution button to allow other people to find my post. Thanks for any replys to my post.

  • Nokia communication center does not display persia...

    nokia communication center does not display persian message correctly

    My n85 got the same problems I got 3573 message in my inbox.. i am thinking to store the msg and reformat my phone.. but the NCC just show my MMS..
    Solution:
    I unplug the cable n restart the NCC connected with bluetooth. It show me text message.
    New problems:
    It only show up to 3252 message.
    I want to store the message. I tried to store it in cvs form, but it doesn't record the time. vmg file does record the time But it need to store one by one
    Is there any software can allow me to store all message to vmg, or other format that contain data like contact name, contact number, date and time?
    Hydra..

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

    When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

    Tools > Options > Tabs - is the last preference there check-marked??

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • I re-set password using specific user ID but when I put new password in it does not say incorrect password  it just spins and spins never accepting it.  What is the problem?

    I re-set password using specific user ID but when I put new password in it does not say incorrect password  it just spins and spins never accepting it.  What is the problem?

    Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
    but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

  • TS3989 New MacAir but  photostream does not work.  Message though everything is on. "In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences." And,

    New computer but Photostream does not work.  I am signed into my account but get the following message:  In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences.  I go to system preferences and then get a message that says that my account cannot be accessed.  However, I am using my icloud account for email and other items and it works fine.  Any thoughts?

    Are you getting this messages in iPhoto? If so try the following (again?):
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream.
    OT

  • When i try to search for contact or create a new one the keybord does not come up

    when i try to search for contact or create a new one the keybord does not come up

    Try going to settings to General to reset to 'reset all settings'
    This should do the trick!
    Good luck

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear. How can I save the new password if popup does not appear?

    When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
    How can I save the new password if popup does not appear?

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • I am setting up a new iTunes account and do not have a credit card.  When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

    I am setting up a new iTunes account and do not have a credit card.  When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

    How did you create it ? There are instructions on this page for creating a new account (the instructions won't work with existing existing account) without giving credt card details : http://support.apple.com/kb/HT2534
    e.g. if currently logged into an account then log of it, then find a free app in the store, click on its free 'price', and you should then be able to create a new account during the 'buying' process and get 'none' as an option on the payments screen

  • Why in a new Keynote the mask does not level to the horizon if the picture is canted it is also remains canted?

    Why in a new Keynote the mask does not level to the horizon if the picture is canted it is also remains canted?

    Thank you so much Gary!
    Could you help me please with the another question?
    How could I adjust speaker's note window in presenters screen. It is too narrow. In the old Keynote it was adjustable.

  • Nokia n8-00 does not support dvr remote H264Midlet

    Hello to everybody.
    My name is Michael and I own the n8 model which I discover that dvr remote doesn't work in my shop cameras as other and chipper phones do, like androids. The program that the security company gave me is H264Midlet from Symbian(DVRX264) folder and shows me only the first setup camera but not the other three cameras. In addition security company claims that Nokia didn't update the software to accept that program.
    Can anyone help me on this or even gives me any other program that works well?
    Thank you in advance

    If it is a fake, than why store.ovi.com recognises it? Very weird.
    Edit: I found this info in it:
             '' Ver: 05.20
                18.08.2011
                RM-233
                Variant 00.00 "
    If something does not go well, ask for help right here.
    Also, a click on the white star under my posts that helped you is very appreciated.

Maybe you are looking for

  • How to find out the process count for a database during a particular window

    Hi Team, I want to find out the maximum process count reached for a database for an interval. Say between 1:00 to 2:00 AM IST. Please help Database version:11.2.0.2 OS:AIX 6.1

  • Can't access iCloud email after update to 10.7.4

    After updating to System 10.7.4, I can't access my iCloud email account on any of my devices (computer and iPhone 4S). The servers are not recognizing my email password, which is the same as my Apple ID password.  I can log in to iCloud using Safari

  • How to install MemCacheShim on PHP app (in Azure WebSite or Linux VM)?

    Hi, We would like to access Azure Caching (co-located in-role deployed at WebRole) from a PHP app running in Azure WebSites (or in Azure VMs). From the documentation it seems that there are 2 options: use memcached from PHP to connect to the gateway

  • Database control escaping /* and */

    Hi, I have a requirement where I need to speicfy sql optimizers in my query like example: select /*+ INDEX(TABLE1 INDEX1) */ COLUMN1, COLUMN2 FROM TABLE1 where someconditions But I am not able to specify the /*+ and */ in the database control query a

  • Mac-Address Locking on ML-1000 for the Cisco 15454

    Does anyone know if you can do mac-address locking on the ML-1000 card on the Cisco 15454. I would like to enter the command "mac-address-table secure", but it does not look like it is possible to do this. Thanks, Eric