My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

Similar Messages

How can i change date and time after importing a file

hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
Jemajoro

OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Not allowed to change date and time for some photos; why?

I have some images that I scanned in of old photos. I'm trying to change the date and time and location to reflect the time the original photo was taken. I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed. They are simple JPEG's so I'm not sure what the problem is. Do I need to convert it to some other format first to be able to do this? Any ideas would be helpful...

Hello Toran,
are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
Meta Data -> change date and time
deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
Regards, Léonie

Changing Date and Time

I have selected both photos and event separately in several attempts to change date and time in Photos/Adjust Date and Time without success. Each time I have attempted to do so another date and time has replaced the previous one but each has been incorrect. Some dates have been inserted dating back several centuries!! The time as well as the date has been incorrect.
I would appreciate suggestions and help in making the change correct.
Thanks.
Vernon

I also have this problem. One folder in particular is affected; within it after a few times to get it into the 2000's from 1900's, it is currently showing 1539.
I am at a loss since the batch change roller lets me select the correct year in iphoto.
I thought it might be a glitch in the older software so upgraded to the '11 iphoto. This made no difference at all.
This is still an issue unless the original poster got an answer or worked it out him/her self.
I also use Picasa on the same system but since it gets the photos from iphoto, it gets its errors there too.

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

Why does calendar keep changing dates and times on icloud

My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)

If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

My app store is saying i have to change date and time setting to get a secure connection but the date and time are correct please help?

My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct

Is the Time Zone also correct?
Also see:
Can't connect to the iTunes Store

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

HT202157 Apple TV says it is updating date and time after a power outage here. But nothing happens. The wheel just keeps spinning. What do I do to be able to use my apple tv?

Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens.. The software is updated and my wifi router is on and working fine and recognized by the Apple TV. How do I get Apple TV to work again?

Thanks for the tip. Unfortunately "Restart" did not change the situation. I then used the "Restore" option. After about 45 minutes of the unit going through the process, Apple TV was up and running again.

Nokia Lumia 800 is off and continually vibrating.

Hey guys,
I was just using my nokia lumia 800 normally and then it suddenly shut off. I've tried everything to get it working, soft reset, hard reset, taking the sim out, letting the battery go flat then plugging it in, but nothing worked. This has happened once before but it turned back on after 5 mins. It has been 2 days now and it is stil continually vibrating. What should I do?

Hi JulseyB, Welcome to the Nokia forum!
It sounds like you have tried most things to get it back up and running again, I have a feeling it might be a hardware failure, I suggest that you take your device to your local Nokia Care point as soon as you can to get it looked at by a specialist.
I hope this has helped!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Nokia Lumia 800. Battery and start up problems

Hi there,
I have been having quite a lot of problems with my nokia lumia 800.
Firstly: When the battery dies it takes a long time to get it charged back up. I have tried cycling the charger power between the laptop and power outlet. I have to play around with the power supply for a long time before the unit actually starts charging. And even then when it has just enough charge, it tries to start up but seems to run out of power half way through the start up and I end up back playing with the charging again.
It seems that there is no battery protection in the phone and the battery can completely discharge. Which would account for the problem with getting it to charge back up.
Secondly: Yesterday the phone went dead for no reason. It had about a quarter charge in the battery. I tried to turn it back on but nothing. I tried charging it and nothing.
Again after cycling the power many times between the power outlet and the laptop, I got some response. It vibrated and displayed the low battery screen. So I thought ok, it's charging. But no.
Once it has enough battery it tries to start up and then freezes on the provider logo and does not go any further. The screen stays like this. Illuminated and with the logo.
I have tried reseting the unit by holding the power button down for 10seconds and it vibrates and tries to start up again. But again freezes.
I have noticed that when I leave it charging, the unit gets quite warm. But no matter what I do the startup proceedure stops on the provider logo and no more.
I tried starting it with the charger connected and it just seems to be powering the screen because when I unplug it the unit goes dead again within a matter of minutes.
I am at a total loss as to what happened to my phone.
Can someone help please?

From the sound of it I think it needs a Nokia Care Point. Could be faulty battery or faulty charging. You can locate your nearest care point using the link below
www.nokia.com/support

Nokia Lumia 800 rebooting 2-3 times a day at rando...

Dear readers,
I have a problem with my Nokia Lumia 800. The problem is that it reboots 2-3 times a day at random. It does it when making a call, being at the homescreen, using an app or not using the phone at all. I took this phone back and got a new one, even a new simcard. But with this new phone, I have the exact same problem!! How can this be? Nobody seems to have the problem, but I do.. with 2 different phones and 2 different simcards. I'm talking about the simcard, because some said it might be the problem. But replacing it doesn't solve a thing. What could the problem be? I am planning to take it back again, but if my third Lumia has this problem, then I'm gonna freak out. Could it be my fault, somehow? I am not holding it in a specific position, nor am I pushing any buttons when it happens...
If you know how to solve this other than taking it back, would be much appreciated.
Pieter Kroon

I also had this problem and wondered if it was because i updated it in zune? I now have a second handset and havnt experienced this yet with my new handset. Your problem it seems is not just your own as my first handset would do it waking up, texting, looking in people hub, web browsing and even did it in the middle of a call. I took it back to the three shop and as the guy looked at it it said goodbye. He replaced the phone and so far i had it for about 6 hours. I did have one issue with the screen not waking up in a call on this one and had to hold the power down to end it. Also find that when holding your finger on the screen while scrolling a web page it judders. :/

How do you change date and time in Photos?

How do you change the date and time of photos in the new Photos app? I know how to do it in iPhoto, I'm having a problem figuring it out for the new app. I have a MacBook Pro 13" running on OS X Yosemite Version 10.10.3

Select photos
Click "Image" menu > "Adjust Date and Time..."
or
Select photos
Command + i（or "window" menu > "info")
"Double-Click" around "Date and Time" on "info window"

My new Nokia Lumia 800 changes date and time after...

Similar Messages

Maybe you are looking for