My new phone's new SIM card is locked and i dont remember it

How to reset a phone, my phone is locked and requires a pass code. Unfortunately I don't remember anything about it

If the iPhone is disabled for forgetting your passcode, follow the steps in this support document. http://support.apple.com/kb/ht1212

Similar Messages

  • My sims card is lock and I was wondering how much it will cost to get it unlock.

    My sims card is lock on my IPhone5 and I want to know how much it will cost to get it unlock. Or is it okay to buy a new sims card and just replace it?

    Only the carrier the iPhone is locked to can officially unlock. Ask them if you qualify.

  • My iPad says no service, and cannot connect to the server,cannot get mail .Sim card is locked and down to one last try.My wireless works for other pads and phones.

    IiPad says no service,and in mail says cannot connect to server.Wi Fi is working fine.

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.

  • TS1398 My phone says no sim card. what do I do??

    My brand new phone says 'no sim card'. what do I do?

    Try removing the SIM and putting it back. Try resetting the phone by pressing and holding the power and Home buttons until the silver apple appears. Contact AT&T for a new SIM.

  • No sim card, no signal and showing 3g and going again to no service

    bought my iPhone 5 the day it came out, from saudi arabia and every since then i have issues witht the connection, it keeps switching to no sim card or no service, and half the time showing no network from two operators( MOBILY network & JAIN network)
    I have powered my phone off
    no sim card, no signal and showing 3g and going again to no service
    tried with out wifi
    reset all setting
    reset all network setting
    what is the solution for above questions....................

    Chiming in from the US, it seems that a lot more of us are having this issue as well lately. My iPad has worked well under 3 OSs and I have never seen that NO SIM message until this week. I am running iOS 5 since it was released, but have not yet upgraded to iOS 5.0.1, and all of a sudden, I see that NO SIM message pretty much all the time.
    I have never removed my SIM or had any trouble with 3G before this week. It's not a big problem for me since I don't use it very often at all - not even on a data plan now - but it's annoying and not what I paid for. And if it happens to my wife, she'll be in trouble.
    Apple folks, has there been any official acknoeldgement for this issue, and has it been properly elevated so it will be addressed? There are quite a few threads on this out there.

  • Trying to update sim card now locked

    I was trying my ipad 2, and after it was backed up, it went into SIM mode is locked, and i dont know what it is?
    ;pease help me restore mz ipad back.

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

    In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

    If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required).  Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable.  Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
    Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
    Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

  • If you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

    if you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

    Under the circumstances this will probably considered a dumb question.
    I currently have a jailbroken unlocked 3GS with a GoPhone plan.  Works great.  I am considering upgrading to a new factory unlocked 4S.  Will I be able to swap in my current SIM card and go?

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • How do i copy contacts from my phone to my sim card?

    I want to copy my contacts from my phone to my sim card so i can then activate my new iphone 4s, but i cannot find the option to do this.

    Is the old phone an iPhone as well, or another brand?  If another brand, then you'd have to ask in some other non-Apple forum.  But your sig mentions an iPhone 3GS, then you need to sync your data to iTunes on your mac/pc.  Then sync the new iPhone 4s to get the data onto it.

  • HT4623 tried updating to iOs 6 and now itunes thinks my phone has no sim card?

    I have tried updating my iphone 3gs to the latest iOs 6 for Icloud and now my itunes is saying that my phone has no sim card in and won't update the phone or let me reset it?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • How do you sync contacts with gmail, not other place on computer? I don't know where the contacts came from on that are now on my new phone. There are way too many and it is not my list of contacts I have on gmail. Where else is this from?

    I don't know where the contacts came from on that are now on my new phone. There are way too many and it is not my list of contacts I have on gmail. Where else is this from? I spent a LONG time on gmail going through my list of contacts. There were about 400 and I got it down to about 90. When I went to sync my new phone, ALL 400 synced.
    Thank you for any help!

    Sorry for the repeat...new here. OBVIOUSLY.

  • Why does my phone say no sim card?  How do i fix?

    I dropped my phone and now it says No Sim in the upper left.  I cannot use the phone.  how do i fix?    

    This happened to me recently. I had to turn the phone on and off twice. I also had to press on the top of the frame of the phone where the sim card is. My issue actually happened when the phone had not been dropped. Good luck.

  • I just got a new phone I went to purchase a song and it said since you have a new device this is your first purchase you must answer the security questions I don't remember the answers to the questions what do I do

    I just get a new phone I wait to pie a song and my phone said this is your first purchase on this device so you have to answer these two security questions but I don't know what the answers are to the question I forget so how do I change them so I can purchase stuff

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (109133)

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

Maybe you are looking for

  • Apache mod_wl_20.so

    I was able to get the Apache mod_wl_20.so for Solaris/Weblogic 7 from BEA support, but I haven't been able to get it configured yet. Has anyone had any luck with configuring the Plug in for Apache? Any help would be appreciated! Thanks, John

  • Supplementary billing for material dispatched from Depot to Customer

    Dear All, My client have a scenario where they had dispatched material to customer while negotiation is going on. After price finalization, they will raise a supplementary bill to customer for material which had dispatched from the date from which ne

  • Wait for move complete not waiting for timeout

    Hi, I am running a small rotary stage with a 7358 motion controller. Occasionally when I command a new position, the "wait for move complete" seems to get triggered almost immediately even though the move is not complete. Since I have put in a "halt"

  • CE 7.1 Trial - Differences between the versions

    Hi there, I would like to check out the new BPM Feature within the NetWeaver    CE, but I'm a little confused about all the different versions available. There is a CE 7.1 Trial SP 3, CE 7.1 Trial SP 5 and a CE 7.1 Trial EHP 1... Whats the current Ve

  • Material Serial Number

    Some <b>Serial numbers</b> of the materials is issued  to the job.But it is still showing the status of <b>available</b> in the warehouse.  This should not be in the status as available in Warehouse as this is already issued from the warehouse.