My new tablet will not connect to my Wi-fi from the jetpack. It says it has poor connection and constantly searches for IP address. Even though my signal strength is excellent and all other devices I own have no trouble connecting to the Wi-fi. How do I f

@

Want to try asking your question again?  It looks like you posted your entire question to the "title" area by accident.  Titles are supposed to be short and sweet, they also come with a character limitation.  Now we cannot see your entire problem

Similar Messages

  • HT5569 My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

    My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?

    If you have connected to other wi-fi successfully, then your wi-fi should be working. Try power cycling the router. Disconnect it from power for about 30 seconds and then restart it. After it has come back, try connecting again.

  • HT2292 I recently got a new ipod touch and the new one will not connect to itunes.  I've done all the troubleshooting and now I'm just plain frustrated.  With the new update my old ipod froze and best buy gave me a new one. What to do?

    My ipod recenly froze with the last update.  bestbuy gave me a replacement.  the new one will not connect to the computer or itunes.  i followed all the instructions and - nothing.  It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes.  i don't get it.  i'm not a supertech so i don't know what to do. help!!!!!!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

  • TS1702 My brand new iphone5 will not connect to my home wifi even though my ipad and old iphone do connect with no problem. What can I do?

    My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?

    Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
    Good luck and do report back.

  • Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Hi, KK93. 
    Sometimes a simple power cycle of the router and Mac can resolve the issue.  However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
    Troubleshooting Wi-Fi issues in OS X
    http://support.apple.com/kb/HT4628
    Also, see the article below to make sure the router setting have been optimized for performance.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Cheers,
    Jason

  • My new 5S will not connect to my home Wi fi can any one help?

    My new 5S will not connect to my Wi fi- from EE. I have entered settings manually and tied every thing short of throwing the phone at the wall! The 4s was no problem.

    settings - general - reset - reset network settings.
    power cycle your router, unplug it from the wall outlet, wait a minutes and then power back up.

  • I cannot print from web pages with mozilla, can print from internet explorer and all other programs. I have a Cannon Imageclass MF8100.

    I cannot print from any web pages with Mozilla as my browser. The printer gives me a blank page. I can print from internet explorer and all other programs. I have a
    Cannon Imageclass MF8100 printer. I spoke to Cannon as I thought it was a Cannon issue and it is not.

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • I took my iMac 2010 to a "Third Party" company to replace my hdd, they did, but now it will not boot. if i took this to the Apple store, how much would it cost to fix? if i buy my own SSD (£70) Thanks a LOT!

    I took my iMac 2010 to a "Third Party" company to replace my hdd, they did, but now it will not boot. if i took this to the Apple store, how much would it cost to fix? if i buy my own SSD (£70) Thanks a LOT!

    DewiRobbo wrote:
    Well, this "third party" is going to put my old hdd back and not charge me any money (as he did not fix it) but i think its better off taking it to an AASP because i have a feeling Apple store will charge way too much.
    The way I read that comment – you seem to suggest the Mac was broken before the third party replaced the disk - is that the case or was it working before the HD was replaced?
    Since the Mac is out of warranty you will have to pay for any repairs wherever you take it. Authorised Apple service centres will be able to get parts whereas any non certified technicians will have to use 'grey market' parts since Apple will not sell parts to the public. These may be reconditioned or not official parts - it's a risk to use them. Visit the Apple store & ask them - there is no point in lying about it being handled by a third party. An Apple tech may be able to tell when they open the case, depending on how meticulous your third party was. 
    If you are handy with a screwdriver & have tools and a lot of patience you could use a guide on iFixit.com, but there is no indication of why this Mac not booting up.
    It could be that the disk is not formatted correctly.
    Are you sure the tech copied an OS onto the disk? Did they install the OS for you or did they clone the old disk?
    Can you boot from a backup disk or from an install disk? Does the disk appear in Disk Utility when booted from another OS (either the installer or a backup).
    'Not booting' can mean so many things, what does booting do exactly? Grey screen, black screen, any noises or tones, any signs of life at all…?
    If you look at the iFixit guides you will see many fiddly connectors, if the tech failed to hook them all back up it could explain the failure, or perhaps you just have a disk that is 'dead on arrival' - sometimes that happens. A properly trained technician should be able to figure that one out.

  • When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • The credit card info on the account has changed but for some reason there is no option for me to make the changes.  In addition, cloud has stopped working and all other programs that need to be updated cannot be.

    the credit card info on the account has changed but for some reason there is no option for me to make the changes.  In addition, cloud has stopped working and all other programs that need to be updated cannot be??

    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -email address https://forums.adobe.com/thread/1446019
    -http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

  • Brand New C309g will not connect wirelessly with ANY wireless security options enabled

    Printer will connect via wired ethernet. I can use the http utility.
    Printer will connect via unsecured wireless connection.
    Printer defaults to autoconfig (169.xxx)when connected  via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
    Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
    Printer is in the same uncluttered room as the router.
    ALL OTHER wireless network devices work fine and keep up with security changes.
    I have legacy devices on the network that make me want to run with WEP.
    I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
    Router is D-Link DIR-655.
    I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
    I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
    -mooi
    This question was solved.
    View Solution.

    Ooops, my mistake.  Thanks for pointing it out.
    Another idea is to make sure the firmware is updated on the router.
    Also, from the control panel of the printer: Setup > Network > Wireless Network Test.  It will self-test the printer radio.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 80 GiG Brand New iPod Will Not Connect- Wants Drivers

    I run Windows Vista. My new 80 GiG iPod will not connect, saying it needs drivers. I guess I'm ignorant, but I'm stumped. The drivers are supposed to be in the latest download of iTunes, but they never are found. I have reset, re-installed my iPod and iTunes until I'm blue in the face. The forums offer no real help except to refer to several articles by Apple that don't give me a clue.
    Help Please.
    Wm. J. McGowan, II

    I run Windows Vista. My new 80 GiG iPod will not connect, saying it needs drivers.
    iPods use the standard Windows USB mass storage drivers.
    perhaps try the technique from the following post:
    http://discussions.apple.com/thread.jspa?threadID=892874&tstart=15

  • Updated failed on new IPad had not connected to yet to ITunes - how to recover lost photos?

    Brand new IPad2 (last week) - used only to take very sentimental photos of elderly parents - no apps loaded - only data is photos on the IPad
    Has not been synced with ITunes or ICloud - so cannot recover this way.
    Connected it to wireless - starting downloading lastest IOS update - froze half way through - turned on / off - Apple symbol appeared for hours
    Allowed battery to deplete hoping when recharged it would turn on again.
    Apple symbol re-appeared and hung - tried hard re-set holding home and on button down - apple symbol only appears - it did diplay quickly for 10 secs connect to ITunes
    Tried connecting to PC - won't recognise device or connect to USB. 
    Absolutley need to recover photos from device - please help - !!

    I don't know much about the application at all. Someone else posted about it the other day and I bookmarked it.
    Maybe this one will work.
    http://www.iphonebackupextractor.com/
    Copied from the website.
    WORKS WITH ALL IDEVICES
    The iPhone Backup Extractor works on Windows (XP, Vista, 7), Mac OS X and Linux, with iPhone, iPod Touch, iPad, iPhone 3G, iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5 backups from all versions of iTunes.
    Look here as well.
    https://www.google.com/search?q=iPhone%20extractors

  • Synch is set up on my lkaptop. My PC will not connect to synch. Why, how fix?

    When I try to setup Synch on my pc, get message saying will not connect to server.
    == This happened ==
    Every time Firefox opened
    == From first attempt at setup.

    Welcome to the Apple Community.
    Which method did you use for moving your library.
    Moving your iTunes library to a new computer

  • New iPhone, will not connect to Game Center app. I have tried rebooting phone/app. Phone is connecting to Twitter/iTunes/AppStore all fine. Not sure what the problem is.

    I have tried rebooting phone/app. Phone is connecting to Twitter/iTunes/AppStore all fine. Not sure what the problem is. Every time I hit sign in I get "could not connect to game center server".

    same problem on iphone 4s.  Other people posting problems too.  Must be on Apples end.

Maybe you are looking for

  • HOW TO GET VALUE OF A PARTICULAR CELL IN ALV GRID

    I HAVE 2 ALV GRID. IWANT WHEN I DOUBLE CLICK ON ANY PARTICULAR CELL OF FIRST GRID I WILL GET THE VALUE DISPLAYED ON THAT PARTICULAR CELL. THANKS IN ADVANCE

  • Cannot find metadata values in workflow queue

    I need some help customizing workflow action menues in WF_INQUEUE_LIST. What I´m trying is show actions depending on a customized metadata value. I´m able to put certain javascript code in order to modify standard behavior if conditions involve workf

  • Query For GRPO

    Hi all,         i want a report for GRPO, the query that i have made is as mentioned below; Select Docnum as Num, U_Gateno as Gate ,Docdate as Date, CardName as Party, U_Billno as Bill,  DocDate as Date  from opdn Select Dscription as Item, Quantity

  • IMac will not power back on. Any ideas?

    I was installing maverick and suddenly my iMac shut down and will not power back on. Any ideas?

  • About  jvm  dump file EXCEPTION_ACCESS_VIOLATION (0xc0000005)

    Hi folks, Well, Unfortunately We are facing some issue which cause a Tomcat service is down in the following environment. OS : Windows Server 2003 R2 SP2 TOMCAT version=5.5.23 JVM version=1.5.0_12 We try to find the cause using attached dump file whi