My newly bought Lindy USB Guitar lead is incompatible with Mountain Lion! Any suggestions?
Hi,
Advice needed.
I recently bought the Lindy USB Audio Guitar Cable. I have plugged it into the USB port of my MacBook Pro (running Mountain Lion) and the blue light has come on the USB end. When I go into System Preferences -------> Sounds --------> Input, nothing shows up to say that the cable has been recognised. I know that it should say something like 'C-Media USB Audio Device', but nothing! The USB slots work fine for all other peripherals i have, just not this.
I have spoken to Lindy and they suggested that it may be incompatable with Mountain Lion!! (Advertised as compatable with all Macs!)
Is there anything anyone can suggest to make this work? A 3rd party workaround? If not, does anyone know of a USB to Guitar lead that IS compatable with Mountain Lion?
Very frustrating.
Thanks
For your product, you'll probably just need to wait for the manufacturer to release a ML compatible driver.
As for other options, the one I've been using for about a year is IK Multimedia's iRig.
http://amzn.com/B003T1WCBW
It's actually designed for iPhone/iPad, but it also works perfectly with newer Macs that have a unified input/output headphone jack.
Similar Messages
-
Sonnet USB 3.0 PCIe Fail with Mountain Lion, Kills Bluetooth
Just sent the following to Sonnet support. They have a system support installer that is supposed to make the card work with Mountain Lion, which it does, but it also kills Bluetooth on my Mac Pro:
Hi there. Have been banging my head against a wall on Mountain Lion upgrade to a 3,1 Mac Pro and have figured out that your Sonnet USB 3.0 System Support Installer 1.0.1 causes Bluetooth to become unavailable, which for me is a deal breaker.
Here is how I get to the conclusion that your software is the issue:
1. Clean install of Mountain Lion
2. Install USB 3.0 Driver (Mac) 1.06B, reboot (Bluetooth fine)
3. Install Sonnet USB 3.0 System Support Installer 1.0.1, reboot, Bluetooth not available (jagged line through Bluetooth icon in menu bar, no Bluetooth item in System Preferences panel)
When I remove this last item and restart Bluetooth comes back.
I hope there is an urgency around a fix for this. Please let me know if you need any more information.Very quick response from Sonnet, known issue, they are working on it, no commitment on timing of fix.
-
Apple USB modem no longer works with Mountain Lion
Now that I've upgraded my iMac to Mountain Lion my Apple USB modem no longer works. Does anyone know of a software fix or have I just lost my faxing ability with this item and have to buy something else?
That's a very sad situation as the Official statement link above (http://support.apple.com/kb/ht3152) states that the modem cannot be used with any Windows. So Apple thinks that people investing in the ability to Fax and relying in Apple's good product only deserves to throw out their modems (because now it is useless on any platform)...
-
What Superdrive (external USB) is compatable with Mountain Lion 10.8.3?
My New install of 10.8.3, will now.... not reconize anything I put in my drive... it spits it back out!
Superdrive does NOT reconize any activity.
It will show my information on/of my drive...but, that is about it...
Is there a patch/fix for this issue with 10.8.3?
If not...why is Apple (seemingly) ignoring this issue? There are so many with the same complaint.
They want $19 to answer this question...why? I just bought the upgrade to 10.8.3 a couple of days ago.
Anyone have any suggestion, beside switching BACK to Microsoft...?
~JOHN~
My "About This Computer" info:
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini5,1
Processor Name: Intel Core i5
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.76f0
Serial Number (system): C0*******JD0
Hardware UUID: ****
HL-DT-ST DVDRW GX30N:
Firmware Revision: RP09
Interconnect: USB
Burn Support: Yes (Apple Shipping Drive)
Cache: 1536 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh
System Software Overview
System Version: OS X 10.8.3 (12D78)
Kernal Version: Darwin 12.3.0
Boot Volume: Mac OS X
Boot Mode: Normal
Computer Name: John's Mac Mini
User Name: John Lipscomb (johnlipscomb)
Secure Virtual Memory: Enabled
Time since boot: 6:04
<Edited By Host>Sorry about the serial number...wasn't thinking. Mentally noted.
I would think it to not be too much, to ask for it to be able to read/write to the listed capablities list with the product (superdrive). The different media type...
I insert blank -R DVD, -R CD, ...anything I put in,it spits it out. NOTE: The ONLY thing I've been able to get it to read, is some old CD's that I had some mp3 files on...it would read that OK... but if I try a DVD read or write and write a CD...NOTHING!
This worked fine before upgrading to 10.8.3 was at 10.7.5....
Any help would be much appreciated.
~JOHN~ -
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
I bought a Macbook pro with Mountain Lion. Can I install Mountain Lion on my other mac for free? How do I do that? Thanks!
On the bright side, it's only $20.
And I would certainly like to have the ownership (and even a copy of the installer on my archive drive), "just in case."
Here are some questions -- which I cannot test because it's not my situation:
Has anyone acquired a pre-owned Mac with Mountain Lion installed but which shipped with an earlier OS version? For those in that circumstance:
Have you been able to apply Mountain Lion update(s)?
How about reinstall ML with Recovery HD?
After either updating or reinstalling, does ML appear in Purchases in App Store?
Just curious. -
i just bought a new Mac, and i cant seem to update to Mountain Lion, any idea's as to why? also i can not seem to download pages from the app store, any idea's on why, please help!!
You need to describe more clearly what you are trying to do and how it is failing.
Was your mac new, or just new to you? What OS did it come with? Lion? Snow Leopard?
Have you already bought Mountain Lion? If so, are you using the same Apple ID that you used for your purchase?
What are you seeing in the App Store? Come to think of it, are in the MAC App Store? (not to be confused with the iTunes App Store!).
If you give answers to these questions we may be able to help! -
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
My iMac came with Mountain Lion preinstalled. I wish to make a Bootable USB Disk.
I find that I am not allowed to d/load Mountain Lion from the App Store.
I wish to make a purchase. Why can't I?
EzraAll he needs is the recovery disc assistant. It's a free download.
OS X: About Recovery Disk Assistant
http://support.apple.com/kb/ht4848 -
External USB drives will not mount under Mountain Lion
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.bj10au wrote:
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.
You can start here
http://support.seagate.com/kbimg/flash/213059/213059_EN.HTML
Pete -
I bought my macbookpro in may 2007, will it work with Mountain Lion? Model Name: MacBook Pro Model Identifier: MacBookPro2,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.33 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 4 MB Memory: 3 GB Bus Speed: 667 MHz Serial Number (system): W872******
Apple states that (of the MBP lines) it has to be from Mid/Late 2007 or later. yours seems to be right on the line.
Apple says
If you are running Lion, you can find out if your current Mac qualifies by clicking the Apple icon at the top left of your screen, choosing About This Mac, then clicking More Info.
you must also have the latest version of Snow Leapord or Lion -
I use MB pro running Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro and create a backup and then transfer ,Although I want Mountain Lion for my MB Pro but can I use the one from MB Air,thnx?
Hello,
If you just do a normal time machine backup on your macbook pro and then plug that harddrive into your new air; you should be able to just use migration assistant to transfer all your files. You wouldnt need to upgrade to mountain lion on your macbook pro.
Hope it helps,
Ryan -
After exporting a slideshow in LR 5 to USB or DVD playing quality is poor. Any suggestions?
It would be more helpful to understand your workflow and what type files you have made.
Are you using audio from both cameras? Do the changes/problems correspond with the camera switch?
Try this with a minute of the problem footage
Export a QT reference file(export QT(not QT conversion)-uncheck make self-contained in the lower left)
(a reference file is like a band-aid- do not use more than once). Listen to it in QT- how does it sound?
If you have a mix/audio problem here it is most likely related to what you are exporting from FC.
If it sounds good:
Create an AC3 and MPG2 of your minute test
Create a DVD with a track of your 1 minute test.
Build the dvd to a folder on your desktop.
Open the Video_TS(from the build folder) in the Mac DVD player App. Whatever you see and hear in the app is exactly what will end up on the burned disc. This is the best way to QC the DVD before you burn it. -
I need a wireless usb adaptor for a Power Mac G4... any suggestions? (needs to be compatible)
With Mac OS X 10.3 or higher, a number of USB Wi-Fi adapters would be possible to use. However, for an earlier operating system, a wireless Ethernet bridge (such as the examples below) can be a better (and sometimes the only) option. A wireless Ethernet bridge does not normally require special drivers, and can thus be used with almost any Ethernet-equipped computer.
http://www.netgear.com/landing/wnce2001.aspx
http://support.linksys.com/en-us/support/bridges/WET610N
Jan -
i have OS Lion registred to different apple id as i bought a used macbook.can i upgrade to Mountain Lion through my own Apple id?
No. The items on your hard drive are not dependent on your Apple ID (documents in particular).
Maybe you are looking for
-
How to use the TCP/IP in Java?Thanks!
How to use the TCP/IP in Java?Thanks!
-
Ipod Shuffle 2nd Gen won't turn on
Hey, Just recently found my mom's unused Ipod Shuffle 2nd Gen, sealed, not opened and still in the box. So i wanted to check it out see if it works, it connected to the computer just fine, put all the music on, charged fully and the green light was o
-
New iTunes 10 removed my recent apps purchased on ipad! what's with that?!
Isn't new iTunes 10 supposed to be smarter? I recently purchased about 10 to 20 apps on ipad, they have been removed during the sync after I upgraded iTunes 10. I know I can just list the apps I had and download them for free, but I don't remember ea
-
JCO Error JCO_ERROR_XML_PARSER
Hi All! I am making a call to an adaptive RFC module on our SAP 4.7 System. But i fail in executing the call. this is the error: Expecting a tag to begin with '<' instead of '0', in "00000000 ", error key: JCO_ERROR_XML_PARSER I tried searching the
-
Firefox fails to start - error the requested resource is not available- DASHPOT.JSP
Firefox had been operating satisfactorily since I acquired the new Dell PC. But after and upgrade I can now not log in. Tried uninstalling and re-installing Firefox to no avail - same error report on startup.