My newly installed Forms 9i_02 doesn't start

Hello,
I wanted to start my Forms 9i, but it doesn't start.
I already uninstalled Forms (and the whole development suite, as you can't uninstall only Forms), but still it doesn't work.
I see the startup screen, but than Forms just quits
Can anybody help?
Bastiaan

This is the new gimmick Oracle have added Javazing the forms & reports,you need to start OC4J instance before you can run forms & the command window of OC4J needs to be minimized till you quit forms.You will find OC4J Start & Stop the same place you find Formbuilder in StartMenu>>Programs>>Oracle 9iDS

Similar Messages

After EBS 12.1.1 rapid install Forms applet doesn't start up

I completed installation of 12.1.1 on Linux EL5 86-64 and everything seems to be working fine.
Application manager shows everything is running including Forms server.
When I'm trying to navigate into profile options screen - IE9 simply doesn't respond, Chrome shows "Registry.dat" is missing.
It is on the local network. No Firewall , no SELinux.
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for VIS_vis adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server VIS_vis adapcctl.sh Started
Web Entry Point Services OracleTNSListenerAPPS_VIS_vis adalnctl.sh Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance VIS_vis adoacorectl.sh Started
Web Application Services FORMS OC4J Instance VIS_vis adformsctl.sh Started
Web Application Services OAFM OC4J Instance VIS_vis adoafmctl.sh Started
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrVIS_vis adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server VIS_vis jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms VIS_vis adformsrvctl.sh Disabled
Other Services Oracle Metrics Client VIS_vis adfmcctl.sh Disabled
Other Services Oracle Metrics Server VIS_vis adfmsctl.sh Disabled
Other Services Oracle MWA Service VIS_vis mwactlwrpr.sh
Any suggestions?

Output from formsstd.out
13/02/19 20:25:50 Shutting down...
13/02/19 20:31:40 FormsServlet init():
configFileName: /d01/oracle/VIS/inst/apps/VIS_vis/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
13/02/19 20:31:40 Oracle Containers for J2EE 10g (10.1.3.4.0) initialized
13/02/19 20:35:09 ListenerServlet init()
13/02/19 20:35:10 Forms session <1> failed during startup: no response from runtime process
Error message from client java console:
oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I couldn't find frmweb_dump_<nnn>.
Thank you

10.5.4 installed, Macbook Pro doesn't start up

Hi,
I just installed 10.5.4 via Software Update. But now my Macbook Pro doesn't startup correctly anymore. I hear the start up sound then the white screen with apple and the spinning wheel. Then then fans start to grow louder and louder until the whole unit just shuts down and is off.
Has anyone already experienced this problem? Please help.
Thanks.
Best Rob

The combo update is only available from the Apple download site. The link is in one of the other 10.5.4 threads. Software update only uses a delta update.
Try booting in the safe mode, hold down the Shift key while booting. If you get to the login screen, don't login but hit the restart button. That should allow a normal boot - it forces a disk repair.
Otherwise, boot into the Leopard DVD, select the Utilities menu and run the disk utility from there and repair HD and permission. If that succeeds, you should be able to boot normally.
The update may have actually succeeded but the cleanup failed.
If you manage to get back into your system, check the version of your OS. It may be 10.5.4
If all else fails, you will need to restore your previous system using TimeMachine, although usually one of the above techniques will usually result in a bootable system without needing major surgery.

Forms-cartridge doesn't start!!...

this is my problem...
in my configuration(NT SP4,DEV 6 prod.+ Jinitiator 11711,OAS
4.7.00+ 4.0.7.1.0 patch,Oracle 8.1.5) the static_jinit html work
fine troght OAS listener.
But trought html cartridge it doesn't run..
the message is "Can not service this request, please try again
later.."
inside wrb.log i see:
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7CEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7DEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
... it seems the catridge doesn't up..WHY??
On my OAS tree applet ALL application server and http listener
are green flags, only application tree are all red flags.
I don't know what to do..CAN anyone help me??
thanks
null

In our case, we had to install OAS 4.0.7.x and developer server 6.0 in the SAME oracle home.
With D2K server 2.1, you had to install in SEPARATE oracle home (even tough the manual did not say so) in order to be able to relink the executables. In 6.0, we said to ourselves (even tough the manual said to install in same OH) that we better not follow the manual and do like 2.1: WRONG
In 6.0 you NEED to install in same OH
null

Why won't my newly installed Premier Pro CS5.5 start?

I just had to have my PC overhauled with a new motherboard and decided to upgrade my Adobe software while I was at it. Installed the Production Suite today and when I try to start Premier Pro CS5.5 it acts like it is starting up, brings up the workspace screen but then just shuts down.
I've got an AMD Phenom II X4 840 Processor 3.20 GHz, 4 GB of RAM, and am running Windows 7.
Photoshop and seval other of the Adobe Programs open just fine...though I haven't tried any of them out just yet...Premier Pro is what I need to use right now and so it's just par for the course that it isn't working.
Any ideas what the problem is?
Thanks

Premiere Pro shut down...I didn't have a lot of time to try and work on this today but I did poke around trying to find the preferences and set about to pull up the event log before having to leave. I figured I would give it a look tonight...I opened some of the hidden files trying to find the preferences didn't have much luck...was about to figure out how to pull the event log (never done that before) when I happened to click on an old project file I had from my older version...and the program opened...even better it stayed open.
To my knowledge I did nothing at all other than look in some hidden folders. I have tried a couple of different times now to just open the program from the start menu and it works...now my firewire port is on the blink so I haven't had a chance to actually try the bugger out but I have verified that all seems stable...for now.
Thanks for the input...if I wind up having the trouble again I'll start with your suggestions but hopefully it won't come to that.
Harm Millaard <[email protected]> wrote:
What shuts down? The computer or the program? Any messages in the event log?
>

Newly installed Premiere 13 does not start.

Install went fine, and have Adobe Premiere Elements 13 icon on desktop. After clicking it, asks for me to sign into Adobe ID, which goes fine. Then asks me to accept Software License Agreement, which I do. That window goes away and I'm back looking at the desktop...Premiere 13 never starts at all. Have repeated this sequence one too many times. Somewhere along the line I've also entered the 24 digit validation code.
Photoshop (purchased in the bundle) works fine.
What am I missing, or who can I call? Many thanks.

teratot
On what computer operating system are you running Premiere Elements 13?
a. Does the problem exist with and without the antivirus and firewall(s) disabled?
b. Are you using a pen and tablet device rather than a mouse?
c. What type of purchase did you make - Student and Teacher or regular version? I ask since you mention validation code
and not serial number.
d. Is Premiere Elements 13 set to run from a User Account with Administrative privileges and with QuickTime latest version
installed on that computer?
Please review and then we can decide what next.
Thank you.
ATR

Cannot get a newly installed Photoshop CS1 application to start up.

I have a PowerMac G5 desktop computer that has been freshly installed with Mac OS X 10.5.4. Using Adobe Creative Suite 1, I did a custom installation of Photoshop CS & ImageReady CS, and also InDesign CS.
InDesign and ImageReady started up with no problems. But after I double-clicked the Photoshop icon I got a window with the message: "Could not complete your request because of missing or invalid personalization information."
So I trashed the Photoshop & ImageReady folder and re-installed them again. But I'm getting the exact same results as before: ImageReady starts up alright, but Photoshop displays the same window and message.
All the other Adobe CS1 applications I've installed are starting up alright. Can you tell me what's causing this problem and how to fix it? Thanks for your help!

Did you have another version of PS on there?
http://answers.yahoo.com/question/index?qid=20070613163307AALZreN
Interesting solution here...
1. Control+Click the Adobe Photoshop CS application file within the Applications > Photoshop CS folder and select "Show package contents".
2. Open the Contents folder, then open the Resources folder.
3. Locate the USERREG file in the Resources folder, and drag it to the desktop. Keep the Resources folder open.
4. Control+Click the Adobe ImageReady CS application file within the Applications > Photoshop CS folder and select "Show package contents".
5. Open the Contents folder, then open the Resources folder.
6. Locate the USERREG file in the Resources folder, and copy it to the Resources folder for Photoshop.
7. Launch Photoshop, and launch ImageReady to be sure the file was copied to Photoshop.
http://www.justskins.com/forums/invalid-personalization-information-ps-62462.htm l

HelloWorld MIDlet installed but it doesn't start

Hello,
I am new to J2ME. Like everyone else, first I tried to get the HelloWorld program running. I compiled it, I made a package, I installed it and then ... it won't start (no error message). Maybe I have got the wrong compile setting. Is there anyone who could help me?
I have a Nokia Series 60. I have the old Java SDK 1.3.0 installed and I'm using the MIDP v1.0 classes for compiling. I tired with several different manifest attributes, I tried with several different JAD attributes, I tried with and without the JAD file. I Kopied the fieles via Bluetooth an via USB ( -> C:\Nokia\Installs). I Installed the Nokia SDK 2.0 and tried with the -bootclasspath to the nokia classes. Then I tried with different targets.
Everytime i have got the same result.
I searched the web for answers, but there is nobody who has got the same problem.
thankful greetins

Its the HelloMIDlet.java file of the j2me_midp-1_0_3-fcs-src-b26-win-19_sep_2001.zip package:
*@(#)HelloMIDlet.java     1.8 01/08/21
* Copyright (c) 2000-2001 Sun Microsystems, Inc. All Rights Reserved.
* This software is the confidential and proprietary information of Sun
* Microsystems, Inc. ("Confidential Information"). You shall not
* disclose such Confidential Information and shall use it only in
* accordance with the terms of the license agreement you entered into
* with Sun.
* SUN MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE SUITABILITY OF THE
* SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
* IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR ANY DAMAGES
* SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING
* THIS SOFTWARE OR ITS DERIVATIVES.
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
* An example MIDlet with simple "Hello" text and an Exit command.
* Refer to the startApp, pauseApp, and destroyApp
* methods so see how each handles the requested transition.
public class HelloMIDlet extends MIDlet implements CommandListener {
private Command exitCommand; // The exit command
private Display display;     // The display for this MIDlet
public HelloMIDlet() {
display = Display.getDisplay(this);
     exitCommand = new Command("Exit", Command.EXIT, 1);
* Start up the Hello MIDlet by creating the TextBox and associating
* the exit command and listener.
public void startApp() {
TextBox t = new TextBox("Hello MIDlet", "Test string", 256, 0);
t.addCommand(exitCommand);
t.setCommandListener(this);
display.setCurrent(t);
* Pause is a no-op since there are no background activities or
* record stores that need to be closed.
public void pauseApp() {
* Destroy must cleanup everything not handled by the garbage collector.
* In this case there is nothing to cleanup.
public void destroyApp(boolean unconditional) {
* Respond to commands, including exit.
* On the exit command, cleanup and notify that the MIDlet has
* been destroyed.
public void commandAction(Command c, Displayable s) {
     if (c == exitCommand) {
     destroyApp(false);
     notifyDestroyed();

Newly installed OS X will not start up on new hard drive

Hello helpers,
I have many problems with my Power book g4 titanium. Most critical: I have just replaced my Hard drive with a new 120 gb. I also, purchased a new dvd OS X 10.4 full retail version. I installed it onto the new hard drive. It loaded properly and said to restart. Well thats it. It will not restart. It acts like it is going to restart. But, all I get is the apple with a little wheel timer thing. I waited for several hours and that is all it does. Please help.
Many grateful thanks,
Rembrandt0328

I suggest you re-prep your new drive then reinstall OS X.
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and select the Apple Partition Map scheme, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
When formatting has completed and the new volume has re-mounted on the Desktop quit DU and return to the installer. Proceed to install OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

HTTP Server Doesn't Start after install

I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
     Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PM

I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
         <ias-component id="HTTP_Server">
            <process-type id="HTTP_Server" module-id="OHS">
               <module-data>
                  <category id="start-parameters">
                     <data id="start-mode" value="ssl-enabled"/>
                  </category>
               </module-data>
               <process-set id="HTTP_Server" numprocs="1"/>
            </process-type>
         </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

Windows 7 64-bit 8GB RAM doesn't start after installing X-Fi drivers

I have Windows 7 64 bit, 8GB RAM for a few months. After inserting an X-Fi Platinum Fatalty Champion Series (S/N MASB046A83R0772D; OP BN 06SB046A00005 Rev A) and installing Creative Sound Blaster X-Fi series driver 2.8.003 dated 26 Jun 09. The sounds plays OK, but after rebooting Windows doesn't start, with a CorruptRegistry error. I have installed Windows from scratch, but it only works until I install the X-Fi driver and reboot. Please help. I have searched the internet and found no solution to my problem besides a Wikipedia article that X-Fi has problem with 64-bit Vista with 4GB RAM or more.

Hi, I am also running windows 7 ultimate 64 with the same sound card and am using the july 5 driver. It works but i cant use the creative control panel as i get a black screen on start-up and when i uninstall the contol panel windows functions normally. I may have to go with the onboard sound to get all 4 speakers to work. I have 6 Gb of ram on a gigabyte X58 Mobo.

HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

Hi,just now i open it with finder and it started downloading!!!
Thank you,very new to mac:)

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

My newly installed Forms 9i_02 doesn't start

Similar Messages

Maybe you are looking for