My Newstand sees The Daily, but does not include other publications
Why does it not recognize: The Wall Street Journal, USAToday, FoxNews, DrudgeReport. How do I load them into Newstand?
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing! -
Is my original iPad compatible with iHome iDM12 wireless speakers? I am having trouble pairing. iPad sees device but does not connect.
It should be it the iHome supports the bluetooth profiles that the iPod supports. See:
iOS: Supported Bluetooth profiles
Try resetting the iHome if it was previusly paired to another device.
Also see:
'iOS: Third-party Bluetooth headsets, headphones, and keyboards -
My iPod touch 5gen sees the wifi but does not accept the password
My iPod touch does not accept the password for my home wifi but can connect to other wifi like Best Buy's.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?
Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341 -
I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance
I have the same problem with another TeamLava app, Fashion Story.
-
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.
-
How do I uninstall a program that is running in the background but does not show in Force Quit?
Open Activity Monitor and look for the program. Select it and Quit or Force quit it from within Acitiviy Monitor.
Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages. You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
OT -
My flash reads the xml, but does not understand the tag php....
my flash reads the xml, but does not understand the tag php. I want to read my xml dynamically, please help me.
code:
stop();
function randomOrder(targetArray)
var _loc2 = targetArray.length;
var _loc3 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc3[_loc1] = _loc1;
} // end of for
var _loc4 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc4[_loc1] = _loc3.splice(Math.floor(Math.random() * _loc3.length), 1);
} // end of for
var _loc5 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc5[_loc1] = targetArray[_loc4[_loc1]];
} // end of for
return (_loc5);
} // End of the function
var randomNUM = "?n=" + random(9999);
_root.lan = 1;
var homehead;
var homelink;
var homelinkwindow;
var homebg;
var homeflash;
var lamp = Array();
var promo = Array();
var promobottom = Array();
var headimg = Array();
f_xmlwork2 = new XML();
f_xmlwork2.ignoreWhite=true;
f_xmlwork2.load("banner.php");
f_xmlwork2.onLoad = function(sucess){
if (sucess){
trace ("XML loaded!");
f_xmlItemx2 = parseInt(this.firstChild.childNodes[0].firstChild);
f_totalx2 = f_xmlItemx2.length;
trace(f_totalx2);
var _loc12 =0;
// declarar a imagem de fundo
homebg = this.firstChild.childNodes[0].firstChild.nodeValue;
f_headimg = this.childNodes[1];
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2) {
juju = f_headimg.childNodes[_loc2];
jj = headimg.push({headimg: f_headimg.childNodes[_loc2].attributes.headimg, bgimg: f_headimg.childNodes[_loc2].attributes.bgimg, msgimg: f_headimg.childNodes[_loc2].attributes.msgimg, leftthrow: f_headimg.childNodes[_loc2].attributes.leftthrow, rightthrow: f_headimg.childNodes[_loc2].attributes.rightthrow});
//end for
allpromo = this.childNodes[2];
jjpromo = allpromo.childNodes;
for (var _loc2 = 0; _loc2 < allpromo.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promo.push({img: jjpromo[_loc2].attributes.img, title: jjpromo[_loc2].attributes.title, url: jjpromo[_loc2].attributes.url, window: jjpromo[_loc2].attributes.window, info: jjpromo[_loc2].childNodes[0].nodeValue});
// end of for
allpromobottom = this.childNodes[3];
jjpromobottom = allpromobottom.childNodes;
for (var _loc2 = 0; _loc2 < allpromobottom.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promobottom.push({url: jjpromobottom[_loc2].attributes.url, window: jjpromobottom[_loc2].attributes.window, info: jjpromobottom[_loc2].childNodes[0].nodeValue});
} // end of for
if (f_xmlwork2.loaded == true)
headimg = randomOrder(headimg);
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2)
trace (headimg[_loc2].headimg);
} // end of for
play ();
} // end if
trace(f_xmlwork2);
stop();
PHP code:
<?
$link= mysql_connect("localhost","rnpac_eco","123");
mysql_select_db("rnpac");
$dir="banner/";
$dir1="produtos/img_pro/";
$dir2="universo/actividades/";
$sql = 'SELECT tbl_produto.id_produto, tbl_produto.produto, tbl_produto.legenda, tbl_produto.detalhe, tbl_produto.preco, tbl_produto.produto_cat_id, tbl_detalhe_produto.proprietario, tbl_detalhe_produto.local, tbl_detalhe_produto.qualidade, tbl_detalhe_produto.alcool, tbl_detalhe_produto.acidez, tbl_detalhe_produto.ph, tbl_detalhe_produto.informacao, tbl_detalhe_produto.gestor, tbl_detalhe_produto.condicionamento, tbl_detalhe_produto.detalhe_t, tbl_detalhe_produto.interesse, tbl_detalhe_produto.transporte, tbl_detalhe_produto.produto_id, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1, tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6
FROM tbl_cat_produto, tbl_produto, tbl_detalhe_produto, tbl_imagem_produto WHERE tbl_produto.id_produto = tbl_detalhe_produto.produto_id AND tbl_produto.id_produto = tbl_imagem_produto.produto_id ORDER BY RAND()';
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row1=mysql_fetch_array($resultado);
$sql = "SELECT tbl_sub_universo.id_subuniverso, tbl_sub_universo.subuniverso, tbl_sub_universo.universo_id, tbl_actividade.id_actividade, tbl_actividade.entidade, tbl_actividade.legenda, tbl_actividade.subuniverso_id, tbl_actividade.det, tbl_actividade.preco, tbl_actividade.data, tbl_detalhe_actividade.actividade_id, tbl_detalhe_actividade.periodo, tbl_detalhe_actividade.descricao, tbl_detalhe_actividade.programa, tbl_detalhe_actividade.informacoes, tbl_detalhe_actividade.actividades, tbl_detalhe_actividade.localizacao, tbl_detalhe_actividade.locais, tbl_detalhe_actividade.servicos, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1,tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6, tbl_imagem_produto.actividade_id FROM tbl_sub_universo, tbl_actividade, tbl_detalhe_actividade, tbl_imagem_produto WHERE tbl_actividade.id_actividade =tbl_imagem_produto.actividade_id AND tbl_actividade.id_actividade =tbl_detalhe_actividade.actividade_id ORDER BY RAND()";
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row2=mysql_fetch_array($resultado);
$query='SELECT * FROM tbl_banner ORDER BY RAND()';
$resultado = mysql_query($query);
echo' <?xml version=\"1.0\"?>
<home_left_headline>
<bgimg>'.$dir2.''.$row1['imagem1'].'</bgimg>
</home_left_headline>
<home_flash>';
while($row = mysql_fetch_array($resultado)) {
echo'<swf headimg="" bgimg="" msgimg="" leftthrow="" rightthrow=""></swf>';
echo'</home_flash>';
echo'<promotop>
<promo img="" title="" url="" ><![CDATA[]]></promo>
<promo img="" title="" url="" ><![CDATA[]]></promo>
</promotop>';
mysql_close($link);i have two files banner.php, for testing my flash banner.
This one works:
-------------------------------| banner.php |---------------------------------------------
<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>
-------------------------------|end banner.php |---------------------------------------------
this other does not work:
-------------------------------| banner.php |---------------------------------------------
<?php
echo"<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>";
?>
-------------------------------|end banner.php |---------------------------------------------
Why? What is wrong? why does my flash does not understand the tag php
Message was edited by: armandix -
My playlists show how many titles are in the playlist but does not show the list of titles
my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?
Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2 -
When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you
Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation. -
Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages
Maybe you are looking for
-
No 3G or 4G connection after the Android 4.3 update
My HTC one updated itself overnight to Android 4.3 & since the update I do not have a mobile data connection. All I get is a message that says my data is roaming & that it may incur significant charges? How do I get my mobile data connection back? Wi
-
Upgraded to Snow Leopard/lost all iCal previous info and Firefox bookmarks
I had previously had a major problem with an Apple automatic update and went thru lots of time and trouble, especially with Safari. After more time than I wanted to spend with Applecare...finally having to do a clean install...I was told all was okay
-
In iphone maps app, the maps are no longer appearing. I get only a light green map of the country. what happend? How do I get the maps to show?
-
Iam looking for the Sony DAVDZ650 Bluetooth drivers for a Windows 7 64Bit
I have bought a Sony Music System model DAVDZ650 but i am unable to play music from my Notebook Dell E6430 running Windows 7 64Bit. Windows could not able to get the Bluetooth drivers for this System. Kindlt do the needful on where i can download t
-
Hello everyone, I'm very new to LabVIEW and programming languages in general. In our class, we have been asked to create a program that describes the motion of a particle in a 2D box. That particle in to be subjected to user selected forces, accerale