My "no filtering" test came back FAIL. It says MAC address filtering is enabled. Help.
My printer is HP Office Jet 6700 Premium. Mac OS 10.5.8
Hi,
Please verify your router configuration:
First, verify if the router Mac Filtering is configured. if so, make sure to add the printer Mac Address as an allowed device.
Verify the Router Wireless security configuration - If the WiFi security is set as WEP, make sure the authentication type is set as either Open or Auto. the Shared Authentication type is not supported by the printer.
For any further guidnance, please clarify your router model, I will do the best to provide you the steps from my experience, or you may contact the router service provider to get additional assistant with the router configuration.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
marie274 wrote:
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
What exactly happens between the the time the printer was last working well and no on your system? Any updates or upgrades?
Lupunus -
"failed to get MAC address for machine"
here is the jist of things.
installed leopard and have it pimped out to my personal specs. I like where everything is and how things are working. No issues. just so you know, i only use WIFI for internet, i share with the guys upstairs. In order to get wifi on my machine, i use a USB dongle. works great no issues with it ever, well until i physically broke it. No big deal. So i replaced it with another one, different drivers/chipset worked.. And since i installed leopard i only backed it up once with TM, i dont care for daily/hrly backups, weekly is fine for me. Now after 2 weeks and a new usb network card. TM gives me an error. i click on the little red i and it says "the backup volume could not be found" so googled and searched the forums not much help, so i tried and formated my ext drive repaired and click on TM again, same error. In the error log in console, right after i turn on TM i get this error, "failed to get MAC address for machine" then 180 secs later, TM fails. again, and again.
Can anyone tell me where i can find what MAC address its looking for??? ethernet has never been plugged in to my machine ever. its only been online via USB wifi. Im really lost here, i dont know what i can do.. im sure if i try another drive ill get the same error. please help if you can.. much appriciated.
Jamieyeah i get a 'failed to get mac address' message too. what's weird is that it seems that leopard 'broke' my ethernet (there was no mac address, couldn't connect to the internet through ethernet after a clean install), and then 10.5.2 'fixed' it. for some reason, i have an 'ethernet 2' heading in system preferences that works correctly and has a mac address and everything, while the regular 'ethernet' tab doesn't work at all. however, i still get this time machine error. i don't understand why time machine is so incredibly fickle. sorry, i'm really of no help to anyone, other than adding another voice to the frustration.
-
Fails to learn mac address on Fiber interface with ISP
Hi,
We have a problem to bring a new 3750 switch interface up with the ISP.
Current interface configuration on the router 7500 with SC/Single mode 1000 Base LX is
interface GigabitEthernet4/0/0
description ###### ISP #######
ip address 1.1.1.2 255.255.255.252
no ip redirects
no ip unreachables
load-interval 30
no negotiation auto
no cdp enable
end
works perfectly fine.
we are trying to move this link to a Cisco 3750G on SFP single mode 1000 baase LX with the same configuration as below
interface GigabitEthernet1/0/51
no switchport
ip address 1.1.1.2 255.255.255.252
load-interval 30
no ip redirects
no ip unreachables
no cdp enable
speed nonegotiate
we dont get any errors on the link but it fails to learn the mac address from the isp.
checked the following.
1. tried changing the SFP and the fiber.
2. checked internally connecting back to back with another cisco device - works fine .
3. checked with the isp for any static arp on their side and it is a no.
I am wondering why it fails to learn the mac-address when it can self ping its own ip address and also the layer stays up with no errors on both the sides.
ThanksDoesn't feel like a fiber/optical issue but a configuration mismatch on one of the end devices.
-
error message says "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer, and then restart the installation." but when I restart the screen flashes and just brings me right back here
Safe boot should be an option as well as normal or without network
you could also try Windows DVD automatic repair, use last restore check point, make sure it had enough free space
also making a 2nd account and maybe use standard non-admin for general use
you installed a driver, or patch tuesday or your hibernation file used all the free space. -
How to back up contacts to Mac address book?
Hi, am trying to back up contacts from my 8900 to my Mac- would like them to go into the address book, but the desktop software doesn't give m that option- instead, they are going into a folder which I then cannot open as it says it contains corrupt info? Would appreciate any help!
Ensuring your contacts are backed up is very important RGreenstreet. I would be happy to provide options to ensure your contacts are saved. With an LG ENV3 we do offer an application called Backup Assistant. This an be downloaded from the Media Center or Media Store on the device. For additional information regarding our Backup Assistant app and how to download click, http://vz.to/1vmljYw
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
Indesign reverts back to defaults everytime mac is restarted...help?
Ever since installing CS4 I have had this trouble with Indesign -- specifically with the measurement units reverting back to the default of picas everytime I shutdown/restart my mac.
Yes, I have tried the old method of changing this in the preferences without any other files open. Has something changed with Indesign CS4?
I believe even some of the other settings revert, but none of those bother me as much as this problem with the measurements being in picas everytime.
Any suggestions on what I can do to make it quit reverting back to the default? Any help is greatly appreciated.Changing default prefs only affects new documents, not those you've already made. Is that perhaps the problem? If the new defaults aren't sticking for new documents, I would suggest the first thing to try is trashing (replacing your prefs entirely) and editing them once again. See Adobe InDesign CS4 * Setting preferences
-
HT4539 when I click on icloud back up it says there was a problem enabling iCloud backup
Also not updating apps.
You'll get better answers either posting in the icloud or Pages, Numbers, etc. forums.
-
The backup on my phone failed and I had to restore my phone. Everything came back except the ringtone I had purchased from itunes. How do I get it back?
If you previously transferred the tone to iTunes, you can sync it to the iPhone again.
If you don't see the ringtone in iTunes, you can contact the iTunes Store using Express Lane. -
I have gotten this error several times, but It works fine on most machines
Here is the most recent example of the log file:
Timestamp Process TID Area Category EventID Level Message Correlation
08/08/2014 11:28:29.131 SETUP (0xef8) 0x1964 Click-To-Run amaxp Medium BaseConfigure::TryGetConfiguration: EULA's have been accepted.
08/08/2014 11:28:29.134 SETUP (0xef8) 0x1964 Click-To-Run aoh85 Medium AdminConfigure::HandleStateAction: Configuring an install/crosssell scenario.
08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964 Click-To-Run aqdco Monitorable TryCheckNetworkCost::HandleStateAction: Failed to initialize NetworkCostManager for http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675.
Assuming low cost and proceeding.
08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964 Click-To-Run aoh9i Medium TryGetVersionDescriptor::HandleStateAction: Getting Cab: v64_15.0.4631.1002.cab
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwv6 Medium Descriptor::Load: Reading Available value from descriptor: 15.0.4631.1002
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run amawt Medium Descriptor::Load: Prereq Node exists. Being parsing it.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwv7 Medium Descriptor::Load: Reading Bootstrapper value from descriptor: 15.0
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run amax8 Medium TryGetVersionDescriptor::HandleStateAction: Descriptor contains Prereqs. Run them now.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwwb Medium IsNativeValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8w1 Medium O15BetaValidator::CheckPreReq: Validator has version descriptor
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8w6 Medium O15BetaValidator::CheckPreReq: No Office 15 installation detected. Prereq check passes.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8xa Medium O15BetaValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964 Click-To-Run anwwn Medium SXSValidator::CheckPreReq: Cross bitness test passed.
08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anwwp Medium BootstrapperValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run an8w0 Medium ClientValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anwwe Medium DiskSpaceValidator::CheckPreReq: Free disk space is sufficient.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run aoh9n Medium TryGetClient::HandleStateAction: Installation path is: C:\Program Files\Microsoft Office 15
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run amaya Medium TryGetClient::HandleStateAction: Looking for existing client.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run amayd Medium TryGetClient::HandleStateAction: Did not find an existing client. Downloading a new one.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run aon8l Medium TryGetClient::HandleStateAction: Getting Cab: i641033.cab
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run Telemetry amawv Medium MonitoredScope::ExecuteUnderStopWatch: TryGetClient::HandleStateAction: Getting Cab. Approximate duration: 499 milliseconds.
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run amaye Medium TryGetClient::HandleStateAction: Found C2R Client in extracted cab.
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run aoh9t Medium TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675"
productreleaseid="none" culture="en-us" baseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" lcid="1033" platform="x64" version="15.0.4631.1002" updatebaseurl="\\server\share\Office365"
updatesenabled="True" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=499
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run apx75 Monitorable TryLaunchClient::HandleStateAction: C2R Client returned failing error code 17002
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run aoh72 Medium ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run aoh9z Medium AdminBootstrapper::Main: Installation came back with 17002.
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Logging Liblet aqc99 Medium Logging liblet uninitializing.
Anyone have any ideas what is causing it?
I don't think it is permissions as I have seen on some forums because the share has read/execute permissions for domain users and domain computersHi,
Are you deploying Office 365 with the latest Office Deployment Tool? Try to download the latest version of ODT from below link, then try again:
http://www.microsoft.com/en-us/download/details.aspx?id=36778
A similar issue was resolved here, you might want to have a look:
http://social.technet.microsoft.com/Forums/en-US/eeb7b577-7868-487a-851d-a6d8c1c6bbda/office-c2r-installation-error-17002?forum=officeitpro
BTW, Microsoft Office 365 Community > Forums > Deploy Office 365
is a better source for this kind of problem and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Invalid Node Error When Repairing Disk - Reinstalled & came back
Hi. Thank you for any help you might be able to give.
Last Friday, I had to shut down my macbook using the power button. It had been running slowly and I couldn't get applications to open. When it came back up, it flashed an "anti" sign. Eventually it started flashing a folder wtih a question mark on it. I booted from the disk and tried to repair it. It froze halfway and I had to restart. I repeated the process, but the disk utility could't repair it. Instead the disk utility told me that there was an invalid node and it couldn't repair it.
I erased the harddrive (the quickest way, not completely) and reinstalled mac os. The computer has been working really well for the past 3 days.
But the problem is back. I turned on my computer this morning to find the gray screen -.- It started flashing the folder with a question mark on it.
Do I need to replace the harddrive? Would that fix the problem? Or is there something else that is causing this problem?
Thank you for any advice.It certainly could be a problem with the drive, but it could also be a RAM problem (bad RAM can cause intermittent memory failure during disk writes causing the directory to become corrupted.) You can check the SMART status of the drive in Disk Utility. If the SMART status does not say "Verified" then the drive is failing. You can also run the Apple Hardware Test:
Insert the original OS X Installer Disc One that came with the computer. Restart the computer and after the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended diagnostics repeatedly for at least an hour to be sure you pick up any intermittent problems. Note any error messages down for later reference. If there are errors you will need to report them to the Apple tech at your local Apple service center or to AppleCare.
I would also check your console and crash logs using the Console application in the Utilities folder. Check log entries, if any, around the moment that the computer crashed or locked up to see if there were any entries that may provide clues to the cause of the crash. -
'You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 67 days.'
What is this? It's the most frustrating thing, and I just wnt to scream 'I DIDN'T'. 23 days ago I did because I was unaware of the new 90 day rule.
But this time, i didn't do anything. I was watching a TV series, and I was purchasing the episodes one at a time (in hopes that this would encourage me to stop and go to sleep after i finished the next one). Anyway I had just finished watching episode 3 and purchased 4 and it had begun to download, when I left my laptop to go get something to eat came back n it had obviously gone into sleep mode. so had to continue the download BUT when I try to continue the download the 'message' pops up. I haven't signed out, it's purchased under j_akale, so I don't understand.
<Edited by Host>Frist tip, after installing software updates (I assure your machine started off with 10.4.2 and when you first used it, you were promted to update to 10.4.4.), go into the utlities folder (under applications) open disk utlitity and verifity and repaire disk permissions, this will greatly boost preformace and may fix your problem. (In fact do this once a week) Go ahead and run the Techtool (Applecare hardware test CD) and check for any problems. If these come up with nothing, I'd call Applecare and tell them what is happening. Applecare will cover you at any Apple dealer and some Apple resellers as well. Going elsewhere will kill your warrenty BTW.
-
Satellite A660 - Camera device failed to initialize after BIOS update
I bought a Satellite A660 PSAW3A-07P00R last December. Yesterday I updated to BIOS version 1.9 (did not record what version before the update). Running Windows 7 Home Premium.
After the update, I got this message when I want to use the built-in webcam. The message is "Camera device failed to initialize. Either the device is in use by another application, or it is not recognized by the system." I have tried to open the device manager but cannot find any image or camera device there. I have also download the webcam application version 1.1.1.15 from Toshiba site but it does not install.
Is it any way to revert the BIOS back to the old version? Can Toshiba look at this problem for BIOS version 1.9? Has any one come across with this and finally fix it? Your suggestion will be greatly appreciated.
Regards,
WillHi
Only the ASP can revert the BIOS to early version because they could reflash the BIOS using the BIOS DOS-rational BIOS.
But the point is that if you are using the right BIOS, then the webcam should work properly in connection with the new update.
So I agree with Xardas. You should set the BIOS to default settings and should save the changes before you would leave the BIOS.
Then uninstall the webcam software and disable also some background processes which could lock the webcam. This can be done in msconfig.
I would also recommend cleaning the registry using the CCLeaner who knows whats is going wrong with the OS registry so CCleaner helps you to clean the registry entries.
After several reboots, you could try to install the webcam software once again.
Good luck -
I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
Like this:
When I play them they're black as well.
Normal Still:
"Missing" Still:
What's with that? What's the best way to fix it?
Thanks.Hi
Magic solution - NO
Some thoughts - YES
Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
Trouble-shooting guide
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
Odd... went to get cuppa coffee, came back my monitor was BRIGHT orange, full screen,, with slight vertical rib pattern, kind of like corrugated cardboard... very slight pattern... what gives.... oh, everything was frozen, no cursor no keyboard, zip. Used back off button. Turned it back on, everything normal...
Had lots of sudden closures like this lately... but usually gray, black, deep blue screen... a couple with the same vertical corrugation pattern only in two shades of pale gold, or grays... what good times we have with apple... never know what'going to be looking back at you next. But BRIGHT ORANGE? Help???Sounds like the graphics card. Run the Hardware Test in extended. Not a great diagnostic, but should pick up something really blatant like this.
http://support.apple.com/kb/ht1509
Maybe you are looking for
-
Mouse over events on alv report?
Hello, i want to make mouse over event for rows of a alv report.When mouse is on a row there will be shown explanations. how can i do this? thanks inn advance.
-
Laserjet 1200 and Win 7 - small sheet orientation problem
I am unable to get my HP Laserjet 1200 printer to work correctly with Windows 7 when printing a document narrower than 8.5x11. The problem is that a 4x6 sheet is fed through the center of the printer but win7 wants to print as if the 4x6 sheet were
-
SAP XI 7.0 on Solaris 10 X86
Hi, have you got experience with SAP XI/PI 7.0 on Solaris 10 with Oracle X86/X64 ? Regards.
-
Simulation error: C:\USERS... No such file or directory
When I try to simulate I get this error: C:\USERS\LISA: No such file or directory
-
Audition - Multitrack - beats per minute ändern
Ich habe aus verschiedenen Liedern mir ein neues zusammengestellt. Dieses möchte ich nun schneller bzw langsamer laufen lassen. Ich kenne es so, dass man irgendwo die Einstellung beats per minute hat und dort kann man dann eine bestimmte Geschwindi