My nokia 305 freezes at startup when it shows the ...
Friends, My nokia 305 keeps freezing on startup at the nokia logo. I tried reinstalling the phone os and also its the latest. But when I press the call key, i can access the call log and i am able to make and recieve calls and messages. Please help.
Your phone needs a re-flashing of the firmware. For that, you need to visit the Nokia Care Center.
Similar Messages
-
PS freezes on me when I use the text tool
PS freezes on me when I use the text tool. Any suggestions other than restarting?
You may correct the problem by right clicking here and then resetting the tool
-
My MAC keeps looking for networks? The ICON in menu bar when clicked shows the WI-FI (in grey) it keeps shuting off and disconnecting. Any Ideas???
Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Reinstall OS X. -
When it shows the contents menu, the screen is halved (picture showing) is there a way to change the screen so it only shows the contents menu?
There is no way to change this on the iPod Classic.
-
Nokia 6303i freezes after startup
I have a Nokia 6303i.
I was deleting my messages (more than 800) , and somewhere on the middle of the proccess it froze.
I removed the battery and tried to turn it on again (with and without SIM), it just shows the home screen, works for 5 seconds (sometimes not) and it freezes.
What do I need to do.
Any way to hard reset or ...
I forgot to say
when it turns on this message appears
"Supportive file. Nothing to display."
I tried to reset it using *#7780#, but it freezes while reseting.
Thanks in advanceRemove the memory card if there is one then remove the battery for a minute or two and try restart again,if this fails i would take it to a nokia care point.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Lenovo T500 freezes at startup when updating to newest ATI driver (Windows 7 RC x64)
Hi I have a big problem with my lenovo T500. I installed Windows 7 RC x64 to my lenovo T500 (2082-53G) and when I install the ATI catalyst beta driver x64 v9.6 from ATI's homepage, my computer freezes at startup (some activity on HD but I can't move my mouse and many processes faile to start at boot). Problem occurs only when win7 beta driver for system interface or ricoh multicard reader is installed because it worked ok until I installed those drivers. I'm not the only one facing this problem: http://www.windows7news.com/forum/windows-7-hardware-help/lenovo-t500-thinkpad-wdm-radeon-3650-drive...
Please help me and thanks in advance!My T400 did this. I installed Win 7 with integrated, installed the ATI 9.6 suite, and never really tried the discrete for the first few days. Then when I tried it, it would instantly freeze at the Welcome screen and the loading circle would just freeze up.
I uninstalled the device and chose remove driver in device manager, and reinstalled the one from 7's original install and it still did this. Mine would just sit there and freeze up after the welcome screen when using discrete, however integrated always worked. I could only boot up in discrete with Safe Mode with Networking.
I ended up doing a system restore to right after I installed Windows, before I installed the ATI 9.6, (4 days ago, so not too bad for me) and booted straight into discrete. Windows update installed the driver for me, now it works perfectly. I am currently using the discrete card with no freeze up issues in the last day.
If you can't do that, you may have to reformat, just let windows handle the ATI driver itself (boot into discrete while installing) and it should work.
I wish I could get the higher performance drivers, but I assume they will figure this issue out and fix it soon with the next driver release.
Hope that helps you out. -
Central instance can not startup when i install the SAP /DB2 9 env
Hi,
could anybody help me? I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been OK, Unfortunately , an
error occurs when I installed the CI.
the error message is that "ABAP Database db must be started on remote server " i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed" the detail informatioin ,please check the the following trans.log. but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password.
first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens. In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before. i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
First let me describe our cluster enviroment
For CI, and DI are not a Single point of failure , so the DI and CI
are out of cluster. The cluster enviroment just includes the
SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
1. Host name
sapaix01 : DB instance and DI (visual hostname dbae1)
sapaix02: SCS,ASCS, CI (visual hostname scsae1)
2. file systems (sapaix01 DB instance )
Sapaix01
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4792544 24% 2808 1% /
/dev/hd2 13107200 6175040 53% 73295 10% /usr
/dev/hd9var 13107200 12816904 3% 1336 1% /var
/dev/hd3 61603840 35610304 43% 3844 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1016152 4% 213 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2512624 41% 6241 3% /opt
/dev/lvusrsapae1d10 41943040 41935984 1% 4 1%
/usr/sap/AE1/D10 (Local file system)
/dev/lvdb2ae1 20971520 20927640 1% 38 1% /db2/AE1
/dev/lvdb2logs 20971520 18346424 13% 25 1%
/db2/AE1/log_dir
/dev/lvdb2archive 41943040 41935984 1% 4 1%
/db2/AE1/log_archive
/dev/lvae1sapdata1 104857600 18817168 83% 47 1%
/db2/AE1/sapdata1
/dev/lvae1sapdata2 104857600 18817400 83% 48 1%
/db2/AE1/sapdata2
/dev/lvae1sapdata3 104857600 18817184 83% 48 1%
/db2/AE1/sapdata3
/dev/lvae1sapdata4 104857600 18817168 83% 48 1%
/db2/AE1/sapdata4
/dev/lvdb2db2ae1 20971520 19874760 6% 3931 1% /db2/db2ae1
/dev/lvae1saptemp 20971520 20967584 1% 12 1%
/db2/AE1/saptemp1
/dev/lvdb2db2as 10485760 10483504 1% 4 1% /db2/db2as
/dev/lvae1db2dump 10485760 10470600 1% 8 1%
/db2/AE1/db2dump
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
For the database version is 9.1 , so I installed the db2 software in
/db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1 (for DI)
on sapaix01, db2 client software in /opt/IBM/db2/V9.1 (I installed the
db software with virtual hostname dbae1 not sapaix01 )
sapaix02
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4915592 22% 2790 1% /
/dev/hd2 13107200 6177120 53% 73643 10% /usr
/dev/hd9var 13107200 12857456 2% 1311 1% /var
/dev/hd3 21495808 16955192 22% 3283 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1046848 1% 105 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2197776 48% 9002 4% /opt
/dev/lvusrsapae1 20971520 20966872 1% 47 1% /usr/sap/AE1
/dev/lvae1ascs01 10485760 10243360 3% 86 1%
/usr/sap/AE1/ASCS01
/dev/lvae1scs00 20971520 20706584 2% 97 1%
/usr/sap/AE1/SCS00
/dev/lvsapmntae1 12582912 9886168 22% 1529 1%
/export/sapmnt/AE1
/dev/lvusrsaptrans 20971520 20967592 1% 16 1%
/export/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
3. hosts file the file is the same on sapaix01 and sapaix02
10.241.13.121 dbae1
10.241.13.125 scsae1
10.10.11.1 sapaix01_boot1
10.10.11.2 sapaix02_boot1
10.10.10.1 sapaix01_boot2
10.10.10.2 sapaix02_boot2
10.241.13.71 sapaix01 sapaix01_per
10.241.13.72 sapaix02 sapaix02_per
4. the installation guide and error message please check the attachment
<<installation_and errorlog.zip>>
5. I run db2ilist command nothing disppear
I have another questions
* whether does DB2 9.1 support installation on the diffirence
directory (default is /opt/IBM/db2/V9.1 my installation is
/db2/db2ae1/V9)?
* Whether does DB2 9 installation has some relationship with
hostname ?
* Why db2ilist command result is nothing after I finished the
DB instance installation ?
trans.log
"trans.log" 143 lines, 14041 characters
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.03.2008 - 20:25:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Mar 10 20:25:40 2008 70 0.000070
4 ETW000 [dev trc ,00000] db_con_init called 25 0.000095
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 42 0.000137
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
4 ETW000 60 0.000197
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000 1018 0.001215
4 ETW000 [dev trc ,00000] Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000 39 0.001254
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001297
4 ETW000 [dev trc ,00000] Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
4 ETW000 282 0.001579
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 42 0.001621
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001664
4 ETW000 [dev trc ,00000] New connection 0 created 29 0.001693
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.001743
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 41 0.001784
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 40 0.001824
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 47 0.001871
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
cessfully loaded
4 ETW000 9175 0.011046
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 42 0.011088
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 24 0.011112
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 42 0.011154
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 25 0.011179
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 40 0.011219
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 39 0.011258
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 51 0.011309
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 40 0.011349
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 40 0.011389
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 40 0.011429
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 39 0.011468
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011509
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011550
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 40 0.011590
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 40 0.011630
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 40 0.011670
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 40 0.011710
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 39 0.011749
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 41 0.011790
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 41 0.011831
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 41 0.011872
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 41 0.011913
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 41 0.011954
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000 39 0.011993
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000 40 0.012033
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000 40 0.012073
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 41 0.012114
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000 47 0.012161
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000 39 0.012200
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000 40 0.012240
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000 39 0.012279
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000 41 0.012320
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000 41 0.012361
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000 39 0.012400
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 41 0.012441
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 41 0.012482
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 41 0.012523
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 41 0.012564
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 41 0.012605
4 ETW000 [dev trc ,00000] (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
4 ETW000 40 0.012645
4 ETW000 [dev trc ,00000] (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
4 ETW000 40 0.012685
4 ETW000 [dev trc ,00000] (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
4 ETW000 41 0.012726
4 ETW000 [dev trc ,00000] (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
4 ETW000 42 0.012768
4 ETW000 [dev trc ,00000] (0.128) DB6: db6_free on invalid memory area (note 1092030)
4 ETW000 40 0.012808
4 ETW000 [dev trc ,00000] (0.133) DB6: statement cache enhancements (note 1101031)
4 ETW000 40 0.012848
4 ETW000 [dev trc ,00000] Supported features: 24 0.012872
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 24 0.012896
4 ETW000 [dev trc ,00000] ..done 126 0.013022
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 25 0.013047
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000 67222 0.080269
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed
with reason "24" ("USERNAME
4 ETW000 48 0.080317
4 ETW000 [dev trc ,00000] &+ AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000 45 0.080362
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080407
4 ETW000 [dev trc ,00000] &+
4 ETW000 46 0.080453
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080498
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END) 26 0.080524
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
4 ETW000 71 0.080595
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'AE1'"Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens -
Hey all,
Tried searching the net but cannot find a suitable solution to my problem
This problem occurs every now and then, but this time I can't fix it.
When I connect my ipad to my Macbook (2.2 Ghz Intel Core 2 Duo 2009 running OS 10.5.8) and I try to click any tab (Music/Book/Apps etc) when I have the ipad selected in iTunes - iTunes freezes and I get the spinning wheel of death!
I really need to sync up some documents into ibooks and am getting really frustrated.
I plan to buy a Macbook Pro in the coming months so upgrading iTunes or OS is not something I want to be doing, I just want to be able to sync books without iTunes crashing on me.
Have tried restarting computer and iTunes, checking active and inactive ram in the Activity Monitor but nothing works.
Any help would be greatly appreciated.
Thanks!What version of iTunes do you have on your computer?
http://www.apple.com/itunes/download/ -
Whenever I scroll in a drop down menu in Flash in Firefox (for example, I move the mouse wheel just one detent), it just continues scrolling on its own all the way to the bottom of the list and freezes all interaction for about 10 seconds. It's really bizarre.
If I start click and dragging things, nothing happens, and then all of the sudden everything catches up and moves. As an experienced programmer, I can say that it looks like some kind of queuing of keyboard/mouse events with delayed execution. Has anyone else encountered this issue?
I found something from 2008 that sounds similar, although I am not using the sIFR they mentioned: sIFR mouse wheel scrolling freeze in Firefox - Stack Overflow
Seems to be a Firefox-specific issue, although it also seems to be something that has just recently started occurring since updating Firefox.
UPDATE: I was checking my Firefox version in Help > About Firefox, and it showed version 33, but also had a pending update so I restarted Firefox. The problem was no longer occurring at that point. When I checked the version again, it said 33.0.2, but it also said "applying update", with another pending restart. I restarted Firefox again. It's now stable at version 33.1. So perhaps it was a problem with that particular version, or even a temporary issue with that running browser instance.Hi James,
Thank you for sharing your solution with us. It will help other users with a similar issue.
Thanks,
Preran -
When I open the Photos app, and I see all the thumbnails of the photos I have taken, I see the filters on the photos that should have filters. For some reason, when I enlarge a photo with a filter to full screen, the filter is removed. But when I go back to the thumbnails, the filter is restored. How can I fix this?
I suggest either learning to use the iPhone or going back to a $15 phone if these are the most important features of a phone to you. Start here: http://www.apple.com/support/iphone/
-
Nokia 305 - No valid certificate when downloading ...
hi everyone....i am using a nokia asha 305 and when i tried to download wechat it pop up "no valid certificate". an anyone in this forum help me to slove this problem?
Moderator's note: We amended the subject as the post was moved to the appropriate board.Does this help …
-
Dell Inspiron 8600 freezes on startup when iPod Nano is connected to USB
I have a Dell Inspiron 8600 laptop and an iPod Nano. If I plug the iPod into the USB port and THEN startup the computer, the computer will reach the screen where it identifies the BIOS version, the one with the white progress bar on black background. The progress bar gets to around 95%, and then freezes forever.
The only remedy is to force shutdown (hold down power switch), unplug the Nano, and restart the computer. If I do it that way, everything is fine.
Is there any known issues with starting up Dell laptops with the iPod connected? Is it trying to boot from my iPod or some silliness like that? Any help is appreciated!
My machine's BIOS is up-to-date, as is my iPod software.Hi aj,
Niel's hit on it with the posted article, but I must ask the obvious question: Why start it up with the nano connected at all? Do you have problems connecting after you boot up?
Maz -
Adobe Media Encoder CS5 freezing on startup when loading ImporterQuickTime.prm
Hi everybody,
As the title suggests everytime I try run media encoder cs5 it freezes at the same point whilst trying to load the importerquicktime.prm file. I have tried googling around for a solution and have found a few people having the same problem but nobody seems to have found a fix.
Does anybody know why it would freeze at this point, and how i could fix the issue?
Kind regards,
GarethHi Todd, thanks for the reply.
I tried the suggestions in the link you provided by allowing adobe qt32 server.exe and dynamiclinkmanager.exe in and out connections. I even tried disabling the firewall temporarily altogether but it didnt help.
I dont have afterfx.exe or pproheadless.exe (I have the design Premium CS5 suite, so no after effects or premiere for me unfortunately)
Could it be something else causing the problem?
Regards,
Gareth -
My iTunes keeps freezing/not responding when I open the program?
I am trying to restore my mum's iPod nano after it just died and won't work- but everytime I open iTunes it crashes! It works for about 1 minute of use before it stops responding and I have to end task, but then when I try and re-open the program it doesn't open unless I plug my own iPod in!
Someone help me try and fix this- mum wants her iPod back and I want my iTunes working again!
My computer operating system is Windows 7
iTunes is the latest update (I think). Any solutions?I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner -
I have a black backlit screen with nothing on it. It happens after turning it on, it chimes and then nothing.... I have tried restarting it by holding down the power button, nothing, same issue.
It is an aluminum MacBook with OSX Lion.Sounds like something is badly wrong with your system. First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup. Select your language, then choose Disk Utility from the Utilities menu. In Disk Utility, choose your hard drive and click the Repair Disk button.
If problems are repaired, try restarting and see if the problems are gone.
If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot. However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch. Hopefully you have backups!
If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup. If that works, you may have some bad third-party software. What that might be is hard to say, though.
If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system. That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.
Maybe you are looking for
-
Restoring iMessages from old HDD to new SSD Mavericks 10.9.5
Hi everyone I recently upgraded my late 2011 MBP with an SSD and did a clean install of Mavericks. Took the old HDD out and put in a USB caddy for external usage and to restore my files. One thing I'm having trouble with though is iMessage. I don't s
-
My iTunes video rental audio isn't in sync with the video
Anyone have any ideas? It's a solid 10-20 seconds behind, fromt what I can tell.
-
Problem while craeting WSDL from ABAP
Hi all I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am
-
Hi All, I am looking for Information about this parameter saved search pop-up and how to set it up in SAP CRM. Which Value should I give there and how should it be used? I used the Search but do not find any thing about that. Best regards Yoro
-
HP printing troubleshooting 4 x 6 paper
HP 4 x 6 paper printing troubleshooting