My nokia 5233 reads every memory car corrupted

whenever i insert a memory card in my phone it shows its corrupted. but when i put that memory card in another phone, it works properly...plz tell me something which can help me.

You need to take your phone to the nearest Nokia Care Centre as it is a problem with the hardware i.e. card reader of the phone.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

  • Corrupted Music Player for Nokia 5233

    Please help me find the software to restore my Nokia 5233 Music Player. It was corrupted by a virus when i downloaded an MP3 song from my desktop computer. I've already removed the said virus from my PC and mobile phone. Since then, everytime i tap the "All Songs" from the menu music library, this message suddenly appears on the screen of my mobile: "File is corrupted. Operation cancelled." Nothing happened when i restored it to factory setting.
    Solved!
    Go to Solution.

    Thanks coolbelief,
    I tried formatting again my mem card for the 2nd time, inserted it again into my phone card slot, switched ON my unit and verified its content by selecting Office>File Manager>Eroot dir of my mem card)>Installed Files.
    I was very much surprised when i saw the "Piano Touch" application in drive Emem card). I haven't seen this kind of application before
    Suspecting that it was a virus, i immediately removed it from the "Installed Files" folder using File Mgr.
    Thanks a lot for the support and for advising me to use File Manager. Now, my Music Player is working well.

  • SSRS 2008 R2 - on Preview report in report builder itself, getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". Any Suggestions please to resolve it?

    Hi,
    I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
    See my below screen shoot.
    Any Suggestions please  to resolve it? 
    thank you in advance !
    best regards,
    Venkat,
    [email protected]

    Hi Venkat,
    According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
    Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
    Click “Window” button from the toolbar ribbon.
    Click “Reset Windows Layout” option.
    Click “Yes” to finish the operation.
    The following thread is for your reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Attempted to read or write protected memory. This is often an indication that other memory is corrupt SAP B1

    Dear All,
    While adding customization addon, the below error shows.
    The below credentials ,
    SAP B1 -- 9.0 Version
    Patch level -- PL 06
    DIAPI -- 32 bit (x86)
    "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
    Please fix this issue ASAP.
    Thanks & Regards,
    Bowya S S

    Hi,
    Please check SAP note:
    1988581 - Unable to update UDT
    Thanks & Regards,
    Nagarajan

  • Attempted to read or write protected memory. This is often an indication that other memory is corrupt.

    Hi there, I'm having a weird issue when I try to connect to my DB server from the machine in which is located.
    I am using SSMS to connect to the DB. When i use the name of the sql server, I can connect without issues, but when I replace the name with an IP address and a port, i always get this error:
    ===================================
    Cannot connect to 192.168.1.215,1433.
    ===================================
    Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Data)
    Program Location:
       at SNINativeMethodWrapper.SNIClose(IntPtr pConn)
       at System.Data.SqlClient.SNIHandle.ReleaseHandle()
       at System.Runtime.InteropServices.SafeHandle.InternalDispose()
       at System.Runtime.InteropServices.SafeHandle.Dispose(Boolean disposing)
       at System.Runtime.InteropServices.SafeHandle.Dispose()
       at System.Data.SqlClient.TdsParserStateObject.Dispose()
       at System.Data.SqlClient.TdsParser.Disconnect()
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginFailure()
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    But this only happens when I try to connect from the PC in which the sql server is, when I try to connect by TCP/IP from another machine on the same network, I can login without problems. 
    Any help will be appreciated. 

    Hello,
    Lot of similar issues related to your post please check if any one is of any help
    Attempt to read write protected memory
    Similar issue answered here
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
    My TechNet Wiki Articles

  • Error: Attempted to read or write protected memory. Memory is corrupt

    2005A SP1 PL4
    I have added a user field with B1 in Items with success.
    Therefore I have started the addon and I have the following error at  SAPbouiCOM.SboGuiApiClass.Connect(String ConnectionStr):
    "Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
    I have restart B1, and I have restart the PC, but the problem persist.
    Before I added user field, the addon worked
    Now if I open items system form, the user field not exists , not even I press CtrlShiftU
    It seems that the user fields are not record correctly
    Now I re-add a new second user field in items. Now there are all user fields in system form Items, but i have the same error with my addon.
    This is the second company that occorr this problem
    Is this a 2005A SP1 PL4 problem? Must I convert the company to 2005A SP1 PL11? Or are there other solution? 
    Help me
    Thank you

    I would strongly recommend to go up to PL11 - and then re-check the issue.
    If it still doesn't work:
    The minimum information to provide here would be the definition of the UDF! Since UFDs work in general there must be some issue with your specific UDF (or some combination of settings).
    Check table CUFD + the actual definition of the UDF in the SQL table as well.
    ...or just involve SAP Support...
    HTH,
    Frank

  • Nokia 5233 Storage Question. You need to know this...

    Hi, I'm not new to Discussions. PLEASE NOTE BEFORE READING THIS THREAD: I've digged EVERYwhere you can think of, so please have in mind that I come here because I really need to know this, I don't want to double-post anything or start a spam war or something. Thank you.
    I was facing problems with my device, Nokia 5233. Sometimes the phone asks for too much time to do a simple task, and I have tried to defragment the memory card to see if it helps, but in the end it made no difference at all.
    After that, I was recording a video and it went just fine. The problem happened later on, when I decided to view the video and it was lagging the image. I mean, the image was freezing sometimes but the audio was OK. I recorded another video after that and it had the same symptoms. NOTE: THE MEMORY CARD WAS WITH 1GB+ OF STORAGE REMAINING AVAILABLE TO BE USED.
    This is about the stock memory card that comes with the cellphone, 2GB storage capacity, Micro SD card.
    After I was told that this is a symptom of the memory card, I wonder if this is supposed to happen with the card that comes with the cellphone. I was **bleep** because I REALLY f***ing need those videos and this turned out to be a real nightmare because when I tried to back up my data using Nokia's software, I ended up with a corrupted file, it was supposed to be a BACKUP and the software just MOVED my SMS messages from the cellphone to my computer and I now can't move it back to the cellphone. But here, my deal is the memory, I changed it to another, higher capacity card, a Kingston Micro SDHC 4GB memory card. And still, I'm facing another issue:
    I want to know what is the REAL extended memory capacity for Nokia 5233
    I ask this because after googling about it for a few hours, I've found so many different opinions...First a guy said it's best not to upgrade the amount of memory at all, because of my device's limitation, second I read somewhere else I can upgrade the amount of memory up to 8GB and the phone "will still recognize it" and then just when I thought I was done with it, I have talked to Nokia Care on Twitter about it and they said I can be facing 'compatibility issue' with it.
    According to his statement, "Unsupported memory cards may just work for small sizes of data, but might give issues wt bigger amounts, depending on the mmc".
    That explains the issue with my cellphone's default video recorder/player. But then, again, Is that supposed to happen with a stock memory card?! I guess it's NOT, is it?
    AND THEN, AGAIN, NOTE: THE MEMORY CARD WAS WITH 1GB+ OF STORAGE REMAINING AVAILABLE TO BE USED.
    So, AFTER recording a 71MB video file, I was viewing it again, kinda hoping it was happening again because this time, it is a 4GB of memory.
    I now decided to dig a little bit using Wikipedia, and then I found what I was afraid of:
    "Devices that use SD cards identify the card by requesting a 128-bit identification string from the card. For standard-capacity SD cards, 12 of the bits are used to identify the number of memory clusters (ranging from 1 to 4,096) and 3 of the bits are used to identify the number of blocks per cluster (which decode to 4, 8, 16, 32, 64, 128, 256, or 512 blocks per cluster).
    In older 1.x implementations the standard capacity block was exactly 512 bytes. This gives 4,096 × 512 × 512 = 1 gigabyte of storage memory. A later revision of the 1.x standard allowed a 4-bit field to indicate 1,024 or 2,048 bytes per block instead, theoretically yielding up to 4 gigabytes of memory storage. However the specification specifies 2 gigabytes as the maximum capacity.
    Host devices designed before this change may incorrectly identify such cards, usually by misidentifying a card with less capacity than is the case by assuming 512 bytes per block rather than 1,024 or 2,048.
    For the new SDHC (2.0) implementation, 32 bits of the identification string are used to indicate the memory size in increments of 512 bytes. The SDCA currently allows only 26 of the 32 bits to be used, giving a maximum size of 32 GB. All SD cards with a capacity larger than 4 GB must use the 2.0 implementation at minimum. Two bits that were formerly reserved and fixed at 0, now called the "CSD Structure", are being used for identifying the type of card, 0 is standard capacity; 1 is high (SDHC) and extended (SDXC) capacity; 2 and 3 are reserved. Older host devices are not aware of this new field thus cannot correctly identify SDHC or SDXC cards."
    Source: http://en.wikipedia.org/wiki/Micro_sd_hc
    So in other words, it can be that my device does not recognize my Kingston SDHC 4GB Micro DS Card correctly. Oh I mean the STOCK, 2GB Micro SD card. And POSSIBLY my Kingston SDHC card.
    Is that correct?
    What is the storage limitation for Nokia 5233?
    Please answer this guys, I hope we can share the knowledge to anyone else who's planning to upgrade the memory for their Symbian-based smartphones.

    I don't mean the card class, I just meant the card type. Nokia is SUPPOSED to work out with majority of the cards out there, specially Symbian devices, so you can take the card off of your previous Symbian-based cellphone and then USE IT on another Symbian-based device, regardless if it is SD or SDHC.
    Look, I just want to know these:
    What is the storage limitation for Nokia 5233?
    Is Nokia 5233 supposed to work with SDHC or not?
    Simple as that.
    Answers?

  • Remote lock & Memory card corrupted issue

    Remote lock & Memory card corrupted issue
    Hi Dear Friends,
    You might have experienced the "Memory card corrupted issue."
    Don't panic! The solution is here!
    Your memory card is just 'locked', it isn't 'corrupted'!
    For sure, this post would be of great help to you, if:
    • You have enabled the "Remote lock" feature of your Nokia device.
    • You have sent the remote lock message to your device and locked it remotely.
    Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
    I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
    Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
    On the contrary, I'm going to explain what may not be mentioned in your user guides.
    Let’s Begin
    What Has Happened:
    In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
    Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
    But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
    So? What to DO?
    1. (This step is optional) Disable the Remote lock feature.
    (Refer to your user guides) and change Allow Remote Lock> to no.
    Then, while the unit is on,
    2. Press the power key briefly, and select Remove memory card.
    3. Remove the memory card from the slot.
    4. Press OK if prompted.
    5. Reinsert the memory card in the slot.
    6. Reopen Menu> Tools> Memory card.
    Is your memory card detected? If yes!
    7. Follow tips number 2 & 3 of What to Know section below.
    Did you get "Password removed" message?
    If no, be careful of the case of the first character.
    If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
    . In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
    Step seven would make the memory card detectable to the connected card reader to the PC too.
    8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
    What to Know?
    Official User guide Tips:
    1. Remote locking also locks your memory card. (E51 page100)
    . Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
    2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
    . Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
    3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
    . Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
    4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
    . Quite interesting, but it contradicts what good E51 says in number three¡!
    . And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
    . The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
    You may like to do a simple search on Google:
    "The first 8 characters are used as the memory card password" site:nokia.com
    Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
    ¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
    But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
    Yours,
    http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

    Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

  • Plz plz help nokia 5233 half display after update

    i,ve nokia 5233 update in my mobile device with GPRS internet software version v21.1.004(7mb file)and it got half display after updaTE…
    any soloution for that.. i update with latest version….
    i also try with Nokia Software Updater in my pc and update again software version v21.1.004(120 mb file).
    i also try set format(green button+red button+cemera button+set on) but problem is any budy ve any idea so plz
    i also try fectory reset.but prob is still.any budy ve any idea so plz plz .
    Solved!
    Go to Solution.

    There have been reported some issues with the 5800 similar to yours, and it seems that the devices affected were devices where the enduser had changed the screen to an non-official one, and after the update the screen was not working like it should.
    If you have done a non-official warranty voiding screen change to your device (yourself that would mean), youre for your self.
    If that isn't the case, I'm sure it isn't, you will have to seek help at a Nokia care point if you've already done what you've written. The hard reset should wipe your phone memory and set your phone back to "basics". - No need of doing the factory reset move after doing a hard reset as it does less than the hard reset and nothing that the hard reset hasn't done.
    Now it seems like you've updated through ota first and then tried to reinstall the fw again. then done a hard reset? - You will need to take it to a Nokia care point as there nothing more we can do for you.
    There could be a hardware issue which has just occured at the same time doing the update.
    Clicking the "contact us" tab at the top right of this page will lead you to the nearest care point!
    Cheers!

  • "Memory Card Corrupted" - Error Help!!!

    Hi, I have a Nokia 6210 Navigator, and my memory card suddenly stopped working when I was opening a file. A message came up "Memory Card Corrupted". When I went into File manager, it showed my memory card as not there (grayed out). When I tried to explore it within my phone, there was no option to format, and there was a message "Memory Card Corrupted" on the screen.  
    When I connected my phone via Mass Storage Mode, it showed it as a drive, though when I tried to open it, it said "Insert a disk into I:\". It does not show up in Disk Management or CMD, and when I tried to format or run Check Disk, it would not run - "Drive not Ready". When I connected it into PC Suite Mode, I could perform a backup, though when I checked it could only backup my Phone Memory, not the card. The other modes don't work either.
    I have tried many different softwares to try and backup/recover my data, and to try and format it, though that didn't work either
    I have tried restarting my phone many times, but that didn't work either.

    no other way to fix it unfortunately. unless you want to go to the trouble of taking your phone to your local Nokia Care Centre, where they will probably do the same thing anyway and you will still have to setup all your applications etc again. those messages are due to the phone thinking that the memory card isn't inserted when it is, so obviously it is a phone problem. another suggestion would be to check that the memory card is inserted correctly and to clean the contacts for the memory card (i.e. gently blow out the dust with a deep breath). if the card is the default one that came with the phone in the box, its most likely the Nokia one. i have the feeling they're manufctured under licence by SanDisk anyway.
    yes, firmware updates can bring advantages such as bug fixes, new features and improved battery life. it is generally recommended to keep the phone up to date anyway to ensure its longevity and increased reliability and security. i know its a pain, but you will have to do the hard reset now that you have backed up all your data. let us know how it goes.
    if you could, please throw some kudos our way, it would mean a lot to us
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • Nokia 5233 lining on screen

    Good day Sir,
    i am having a screen problem with my Nokia 5233, when my phn stay for about 5min , there some lining on the screen like a screen server and it is impossible for me to detect my incoming caller, i have experience this for about a month, i tort the screen is bad but the screen of my phn is ok , so i dnt know waht to do , pls help me
    Moderator's note: Subject changed to a more appropriate one for the post.

    Most probably you need to do what Iris9290  has suggested..but you can try your luck by first Soft Resetting the phone by dialing *#7370# followed by 12345 (Default code unless changed by you..) when prompted. Back-up all your data thru' Nokia suite before the Reset as it will wipe all data from the phone Memory...
    Other thing you may try is see if the phone Firmware is up todate..If not then Update it... else, re-install the existing one..
    The reason for suggesting the above is, since you mention that after some efforts the Display becomes normal so if it is NOT related to Hardware but only software then the problem may get resolved without replacing the screen ....

  • Nokia 5233 messaging problem

    I hav amonth old nokia 5233 ,whenever i message more than 3-4 people it gets very slow......during that time i cant open another application.......
    Is this problem with all nokia 5233 or my cell has a problem?
    plz help....

    hey dude see that which memory are you taking in use..........
    if u are using memory card than it will take as usual long time which is as said ur problem......but if u use phone memory as primary memory in case of messaging thn it wont take long time.................
    the same was the problem for me nd followed the same nd it worked............

  • DWCS3 READ ONLY MEMORY CRASHES  OSX 10.5.x

    I am getting repeated crashes when adding graphics to pages
    with this
    error:
    model="PowerMac7,3" cpuCount="2" cpuFreq="2500MHz"
    busFreq="1250MHz" />
    <crash exception="Read Only Memory Exception"
    instruction="805e0000">
    <backtrace crashedThread="0">
    <thread index="0">
    Then I usually have to run permissions repair every time or
    else DW will
    start crashing every time I open it.
    Anyone have any idea what's going on?
    Thanks
    ~~~~~~~~~~~~
    Jefferis Peterson, Pres.
    Web Design and Marketing
    http://www.PetersonSales.com

    On 5/8/08 10:50 AM, in article
    fvv3us$auk$[email protected],
    "SnakEyez02" <[email protected]> wrote:
    > In your users library->preferences folder, there is a
    .plist file for
    > Dreamweaver. If you do a quick search to find that file,
    drag it to the trash
    > and start up DW. It will take a little longer, but it
    could be a corrupt
    > preferences file.
    >
    That has worked on and off. I seem to be getting the same
    repeatable bug
    crash:
    <crash exception="Read Only Memory Exception"
    instruction="81420000">
    It happens when I choose EDIT from the properties panel for a
    graphic which
    opens fireworks. I edit the graphic and choose done. An error
    pops up that
    says making this change would violate the template something
    or other and
    then DW crashes. The change obviously does not violate the
    template
    because the graphic made smaller fits even better within the
    editable area.
    Anyway, from that point on it repeatedly crashes when opening
    with the
    memory exception. I turned off all but system fonts, repaired
    permissions,
    deleted the plist, but I'm still getting crashes every time I
    open a file.
    This is becoming annoying to the point of #(*$^ing.
    I didn't have these problems in Tiger...
    Jeff
    ~~~~~~~~~~~~
    Jefferis Peterson, Pres.
    Web Design and Marketing
    http://www.PetersonSales.com

  • Not able to connect Nokia 5233 with laptop using b...

    Hi Experts,
    I purchased Nokia 5233 couple of months back. Since then i am facing problem in connecting the phone with any laptop using bluetooth. It gets connected to other phones via bluetooth very easily, but doenot get connected with any laptop.
    Whenever I try to search the phone, it appears as active device. When I try to connect to phone the message appears "connection failure". It happens the same with every laptop. Is there anything which i can do to correct this problem?

    try the post above yours.
    Using the search function and actually reading threads will reveal more that you may think..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Email app on my nokia 5233

    the default email application in my nokia 5233 is not connecting to network and not updating my emails
    Solved!
    Go to Solution.

    Hi Sann_,
    You didn't post wrong, let's see if we can get the emails syncing. Please log in here, and check that the settings are ok. You can also delete the account from there and from the phone, and try to configure it to the phone again.
    If it still does not work, and you have checked that the internet connection works, then please do the following actions and in between them check if it works.
    Make a backup with Nokia Suite. Type in *#7780# followed by lock code (default is 12345). This is soft reset, no data will be lost.
    You can also reinstall the phone software. The process is the same as when updating with Nokia Suite, but at the end select "Reinstall".
    If the sync still does not work, type in *#7370#, also followed by lock code. This is hard reset. The phone memory will be wiped so make sure you have the backup. Restore back up.
    Please let me know if it still does not work. Also please tell me what happens when you try to sync and are there error messages?
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

Maybe you are looking for