My nokia 5530 wont turn on when i press power butt...

Hey guys,
my nokia 5530 wont turn on when i press power button
I can't do a hard reset because i can't turn on ..
Anyone have the solution please ?..
I already try this :
" /t5/Nseries-and-S60-Smartphones/nokia-5530-wont-come-on/m-p/581891 "

Try removing the memory card, and turning it on while plugged it.
Also try it with a new battery.
This also happened to me once, I even hard reset it and nothing happened. Turned out to be that the battery died suddenly.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

I have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5 or Later
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

My mac pro wont open up. I press power on and it begins loading woth bar filling up and when is complete. it turns off again. Help!

My computer was running slow so i turned it off. Now it wont turn on. I hot power and begins loading the bar. once full it turns off again.

Computers that ran Tiger do not run Mountain Lion.
Leopard is the oldest that an eligible Mac Pro would have shipped with in the Early 2008 3,1 with 10.5.1+
Internet Recovery does require a disk drive and free space to setup and hold the download and to initiate an installation. Haven't done so so I don't have first hand as to all the t hings that can and do go wrong.
When you do have the installer package, and BEFORE you run it, SAVE IT SOMEWHERE SAFE!
How to make your own bootable OS X 10.9 Mavericks USB install drive
http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
When Apple released OS X 10.7 two years ago, it stopped selling operating system DVDs in its stores, stopped shipping recovery disks with new Macs, and switched to downloadable installers for OS X upgrades. These download-only installers have actually worked pretty well—I’ve never had an issue downloading the software from the Mac App Store or restoring a Mac using the Internet Recovery feature when something went south. That said, it’s still nice to have an install disk handy for those cases when you don’t have a connection, when your connection is slow, or when you just have a whole bunch of Macs and don’t want to have to download the installer on each and every one of them.
The good news is, as with Lion and Mountain Lion, it’s possible to create a local USB installer for Mavericks. The bad news is that it wasn’t as simple as it was before—Apple has changed the way the installer works, and making an install disk manually is more difficult than it used to be. Before we get started, here’s what you’ll need:
An 8GB or larger USB flash drive, or an 8GB or larger partition on some other kind of external drive
The OS X 10.9 Mavericks installer from the Mac App Store in your Applications folder. The installer will delete itself when you install the operating system, but it can be re-downloaded if necessary.
The latest beta of the Lion Diskmaker app, available here (as of this writing, version 3 beta 3 is the most recent). This app is free to download, but the creator accepts donations if you want to support his efforts.
An administrator account on the Mac you're using to create the disk.
https://discussions.apple.com/docs/DOC-3353
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because
the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
About TimeMachine backups and Recovery Mode
http://support.apple.com/kb/HT1427
http://www.apple.com/osx/recovery/
OS X Lion and later let you:
Start from OS X Recovery using your Time Machine backup disk. With OS X v10.7.3 and later, Time Machine backs up the Recovery System on your Mac to your backup drive as well. This lets you use your Time Machine drive to start up your Mac if needed. OS X Recovery:
http://support.apple.com/kb/ht4718
OS X Internet Recovery
Mac models introduced after public availability of OS X Lion include the ability to start up directly from an Internet-based version of the OS X Recovery system. OS X automatically uses this feature when the Recovery System on the hard disk isn't available (such as when your hard disk encounters an issue, or when your hard disk has been replaced or erased). OS X Internet Recovery lets you start your Mac directly from Apple's servers. Starting up from this system performs a quick test of your memory and hard drive to check for hardware issues.
OS X Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, entering a passphrase. Next, OS X Internet Recovery downloads and starts from a Recovery System image. From there, you are offered the same utilities and options as a local Recovery System.
Requirements for reinstalling OS X using Recovery
Reinstalling OS X using OS X Recovery requires broadband access to the Internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the Internet from Apple when OS X Recovery is used for reinstallation
If you use Internet Recovery to reinstall OS X, it installs the version of OS X that originally came with your computer. After installation is finished, use the Mac App Store to install related updates or later versions of OS X that you have previously purchased.
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
http://support.apple.com/kb/ht4718
Installing OS X on an external volume - such as your USB flash drive
http://support.apple.com/kb/HT5911

My iphone wont turn on when connected to a laptop or pc,but when its connected to my dock, its shows it need restoration what should i do?

my iphone wont turn on when connected to a laptop or pc,but when its connected to my charging stereo,its shows i need to conect to itunes but then after 10-15 min. it turns off.

Hi Monzairita,
Thanks for visiting Apple Support Communities.
If your iPhone only powers on when connected to a dock, and shows the "connect to iTunes" screen, start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best Regards,
Jeremy

My mac mini wont turn on but there is power to it as the usb port charges my iPad

My mac mini wont turn on but there is power to it as the usb port charges my iPad. My monitor uses a HDMI cable when the mac mini is off it says no input received which it does not say so it is receiving some signal from the mac mini. I have tried a different cable and a different monitor/ hdmi cable. The fan isnt running there is no start up noise but the little light on the front blinks every 4-5 seconds. Im booked in to see a GENIUS on sunday but I was wondering if there is anything I can do in the mean time. The mac mini is only 8 months old if that. Any ideas people? Oh the mac is also running mountain lion and has been since the day of release i've never had a problem up until this.

The following table lists the new tones and their meaning:
Tone(s)          Description
1 tone, a 5-second pause, repeat          No RAM installed
3 successive tones, a 5-second pause, 3 successive tones          RAM does not pass data integrity check
1 long tone when holding down the power button          Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones          Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

Automatically turn on when mac gets power

I have a MacPro thats plugged into a power conditioner (power distribution rack) and id like the mac to turn on when the power conditioner is turned on, at the moment when the power conditioner is turned on and the mac gets power, it waits for me to press the power button to boot up, i want it to simply turn on when it gets power and avoid having to press the power button.
thanx
TW

In "Energy Saver" system preference, enable "Start up automatically after a power failure". It won't start if you manually shutdown, but should if it shutdown due to power failure.

I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

Maybe some help here:
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1365

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

Provide the computer's firmware password. If you don't know what it is, contact the person you got the computer from or Apple.
(91589)

I plugged a usb in to my macbook pro and rhe computer went off and wont turn back on. the power light doesnt light. what do i do??? help!

i plugged a usb in to my macbook pro and rhe computer went off and wont turn back on. the power light doesnt light. what do i do??? help!

Do you have Apple Care? Is there an Apple Store near you?
Sounds like a hardware fault...

When i press power button i hear several click sounds before start up?

When I press power button I hear several click sounds before start up begins. Shortly after Apple logo appears it clicks off.

Which MacBook Pro do you have? If it has an optical drive then that is just the optical drive checking if there is a disk inserted.

While attempting to update my ipad2 with the 8.1.3 update, screen froze towards the end of the update. Tried to turn it off by holding power butter to do a hard reset, but it won't turn off. How do I fix this?

While attempting to update my ipad2 with the 8.1.3 update, screen froze towards the end of the update. Tried to turn it off by holding power butter to do a hard reset, but it won't turn off. How do I fix this?

Have you tried a soft-reset : Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should reappear and it will hopefully reboot.
If that doesn't work : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Nokia 6280 Wont turn-on

Just got a new nokia 6280 2 days ago.
Tried to send a vid on bluetooth and the phone went off and now wont turn-on.
When I press the power is starts with the nokia logo then 4 funny screen flashes then turns off is there any way to fix this???
Any help with be great....

This video reminds me of the video which a Brand New N6280 exploded because of overheating or counterfeit battery.Here is the link:
www.esato.com/archive/t.php/t-141949,1.html
Be the judge.
Cheerios!

Help nokia n8 wont turn on

wont turn on and freezing and when your holding it up right then turn it screen wont move

I had a problem with the N8 from the first day I bought it, it just switches off and then ON with a blank white screen.
and recently when it does that It's difficult to switch it on again. I press the power button for about 8s and it vibrates three times, but when I switch it on again it shows the white screen. I've been trying to switch the phone on for about 30 minutes and its irritating. I really wish I could change this phone. It has also become really slow with all the games i've installed. I am not impressed at all.

Nokia E75 wont turn on

I was carrying my nokia e75 in my pocket and I looked into phone and it was turned off. I tried to turn it on but when I press turn on/red phone button nothing happens. I thought that battery is empty and I connected phone to charger, and when I connect it it gives "charging" sound and shows nokia logo without light, but when I try to turn it on with charger connected it doesnt work either.
Can someone tell me how can I fix problem or how can I hard reset it? Thanks.

This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia RX75 Wont Turn ON???

I.ve had my booklet for 3months now, and yesterday i was using it fine this morning i tried to turn it on and nothing it wont turn on. i have it plugged in to the ac and battery is in.. all it does when i press the power button is the SLEEP light turns on and off thats it booklet dont do anything else!! anyone got any ideas on what i can do.. besides send it in?
thanks

I would
1. unplug ac adapter
2. remove battery......important
3. press power button a few times........it won't do anything obviously
4..   waite a few minutes
5.    connect AC adapter tightly ( do not put battery back yet)
6. try to turn it on
7.    if ok now.......put battery back
8.   if not ok.....probably needs to be serviced.

My nokia 5530 wont turn on when i press power butt...

Similar Messages

Maybe you are looking for