My nokia e71 stuck up most of the time?
hiya!
my phone stuck up most of the time so then the only solution is to take the battery out and then put it in.. is there any other solution for this problem, and is there any problem with the nokia e71 antenna system , because the signals drop most of the time, and can anyone tell me which antenna is used in nokia e 71?
regards....
hiya!
my phone stuck up most of the time so then the only solution is to take the battery out and then put it in.. is there any other solution for this problem, and is there any problem with the nokia e71 antenna system , because the signals drop most of the time, and can anyone tell me which antenna is used in nokia e 71?
regards....
Similar Messages
-
Most of the times… When i use the Notification bar to share my tweet… It automatically gets stuck. Please Help me to slove this issue!!!
Upgrade your browser to Firefox 8 and check
* getfirefox.com -
Phone gets stuck most of the time after ios7 update
phone gets stuck most of the time after ios7 update
Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Most of the time stuck and seems to be not running
Upgrade your browser to Firefox 9 and check
* getfirefox.com -
I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
When reading a web page, I will right-click on a link and select 'open link in new tab' and most of the time it will open the new page right at the bottom. I then have to scroll up with the mouse or hit the 'home' button on my keyboard to get back to the top of the page. I've already looked at the tab settings in the options menu, and there's nothing there that seems to apply.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
When I try to use my magic mouse, most of the time it won't open an item but instead will give me options like: back, open new page, open link in new window, and I am actually on top of for instance, the comment field in facebook...It takes several attempts of clicking off the entire page to get it to just open the link or respond appropriately...
the mouse performs a right click instead of a left click. Check your mouse preferences in the system settings.
-
i and my brother have different apple id's but are using the single itunes library on our home PC.When i am syncing my iphone most of the times the apps that were purchased with my brothers apple id is also getting on my iphone.
How do i differentiate the apps that were purchased with my apple id and sync accordingly.As i want only the apps that were purchased in my apple id.
I am aware of the fact that i can click on the app and check with "getinfo" to see with whose apple id it is brought.but there are hundreds app which i cannot check one by one.
How do i filter the apps with apple id and sync?Connect the device to the computer.
Open iTunes.
Select the content desired to sync.
Sync. -
I am running OS10 on a MAC and every time I go too another web site (most of the time) a new tool bar pops up that says " Firefox prevented this page from automatically redirecting to another page" and on the other end I must hit the button ALLOW because it is usually screwing me up and Iwant to disable it or use another browser
Options > Advanced > General, un-check "Warn me when web sites try to redirect or reload the page"
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time.
The specs of this iMac are:
iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
Except that for all practical purposes, my computer isn't working.
I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
Any and all suggestions will be greatly appreciated!First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
I had my iphone 5 replaced at the apple store as of a broken sleep button and i was wondering if they would replace again as i think it may of happend again as it works most of the time but theres an odd click where it wont work.
Yes.
-
E-mail won't send most of the time
Ever since my Touch upgraded to the v. 4 firmware I've had trouble with sending e-mail. I don't have as much problem receiving mail...sometimes I can only preview my messages and but most of the time I can open received messages. For a while I couldn't send mail (I use Yahoo and the Touch already had the server settings for it), then after a couple of days it suddeenly started sending again. Now it's not sending! So aggravating!!
The error message says "The connection to the outgoing server "apple.smtp.mail.yahoo.com" failed. Additional Outgoing Mail Servers can be configured in Settings>Mail,Contacts,Calendars." This seems silly because it works - just off and on! Does anyone else have this issue...any solutions? Thanksmajorv~
I am having the same problem. I have an ipod touch that worked fine up until the 4.0 firmware. The only thing I have noticed with mine that it was glitchy when it came to sending mail (which I use yahoo). Then most recently it stopped sending altogether. My isp is verizon & I have an airport extreme. I noticed today I can bounce off of a neighbors linksys wifi. Now I have no clue who their isp is. It's either verizon or comcast. Regardless I was able to send mail using their internet. Mine on the other hand is a no go.
I too am *extremely frustrated*. I have deleted my mail accts several times in hopes of it fixing the problem. I also updated to the latest firmware of 4.1 in hopes of it resolving the issue. I even tried using other smtp servers with no luck.
I hope someone out here has a solution to this problem. It is very frustrating. -
I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1". -
I live in the Philippines but my iPhone 4S was bought from Korea. There is no Apple store in my place and no one can help me fix my problem with my iPhone. I don't think Apple would replace my phone either despite the fact that it's still under warranty.
My phone would normally go on "No Service" status since I updated to iOS 5.1, so I am not able to make/receive phone calls/messages most of the time. It's really frustrating especially because my iPhone is just 3 months old.
Can anyone help me with my problem?
- I have restored my iPhone's OS and didn't do any back up
- Did reset network, reset all settings, among other resets available in my phone
- Used a new sim card from my network provider
- Used sim card from other network provider (since my phone is factory unlocked)
All the abovementioned didn't work and I'm getting really frustrated.I never had this problem when I was using iPhone 4.
Help me, please.Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.
-
BPM process most of the time not started,
Hi XI dudes,
In our latest XI scenario we read a file from a shared folder (on the same host as the xi server is installed) and we pass the input into an BPM scenario.
There is however a very annoying behaviour: the file is always read correctly, but is most of the time (75% fails) not passed towards the BPM. It seems that in some cases the route determination is not working correctly.
Inside the BPM scenario we do a number of action, but we can divide them in 2categories:
1) RFC calls
2) File creation
The RFC calls do always succeed, the file interaction almost never.
Also, when we try to write the result of the xi scenario into a file, this fail 90% of the time. The calling of the RFC always happens correctly.
What we do at the moment is just copy exact the same file again and rerun the scenario, until is works. This is however not the way it should be.
On monday we are having a very important demo. All input is apreciated and will be rewarded.
Kind regards
JorisInternal messages:
When verything goes fine the soap header of the first message contains following receiver information:
<SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>E4F74F70-B9F5-11DA-C2DE-000D56B9D8A6</SAP:MessageId>
<SAP:TimeSent>2006-03-22T22:47:52Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>ADDRESSCHANGE</SAP:Service>
<SAP:Interface namespace="urn:cernum.com/xi/demo/ADDRESSCHANGE">MI_OUTB_BUPAINPUT</SAP:Interface>
</SAP:Sender>
<b>- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BPM_AddressChange</SAP:Service>
<SAP:Interface namespace="urn:cernum.com/xi/demo/ADDRESSCHANGE">MI_ABS_BPMINPUT</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="urn:cernum.com/xi/demo/ADDRESSCHANGE">MI_ABS_BPMINPUT</SAP:Interface></b> </SAP:Main>
When it goes wrong, it looks like this:
<SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>47D5D3A0-B9F6-11DA-BD78-000D56B9D8A6</SAP:MessageId>
<SAP:TimeSent>2006-03-22T22:50:37Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>ADDRESSCHANGE</SAP:Service>
<SAP:Interface namespace="urn:cernum.com/xi/demo/ADDRESSCHANGE">MI_OUTB_BUPAINPUT</SAP:Interface>
</SAP:Sender>
<SAP:Interface namespace="urn:cernum.com/xi/demo/ADDRESSCHANGE">MI_OUTB_BUPAINPUT</SAP:Interface>
</SAP:Main>
No receiver tag is added ... .
Maybe you are looking for
-
My extension on clicking something should open a webpage and that webpage should be able to communicate with the servers. PS: I have javascript and CSS in that Page. If i cannot make then what changes do i need to make in the web page for that change
-
Hi there, I need to create closed captions for a video that aren't in English (Bengali and Hindi). Is there a way to add CC that aren't in English in Premiere Pro? In the captioning window the Bengali shows up correctly but on the program monitor the
-
Migration assistant - PC doesn't receive Passcode
I am trying to use the Migration Assistant to transfer data from my PC (XP SP3) to my Macbook Pro. It hangs up when the Mac tries to transmit a passcode to the PC. It never comes through. I've tried using my wireless home network, and I've tried c
-
How do I get my photoshop registered again when i am not able to de-activate it on the old computor
Hi Is there anyone that can assist me - my old computor totally crashed. I bought photoshop CS5 in Dec and loaded it onto my old computor prior to the crash. Now I am unable to de-activate it before re-registering it on my new computor. Thanks Ria
-
hello all, i have a problem where i need to send an idoc from my R/3 system to my xi system process it ans store it in a specific location, but the idoc i am sending is of type "Customer" i.e KU. i am able to find the xml idoc send from the R/3 sy