My Nokia Lumia 710 does not show the balance after...

I like the Lumia range and am beginning to prefer WP7.x to Android but there is this irritating thing that whenever I make  a call, I do not get my remaining balance which I used to get with all my previous phones, inlcuding the Nokia N900
All I wanna know is that am I the only one who is facing this problem or is this an issue with the OS.
I've contacted the Nokia Service Center and the guy there told me that WP7.5 does not support this feature and after browsing through the net, I am still unable to decipher if this is a problem with my device or are others facing the same issue as well.
This is my first post, please let me know if I did anything wrong.
Thanks in advance
Solved!
Go to Solution.

Correct. WP7 does not support this and if your mobile carrier does not offer an app for it, you need to visit their homepage for information on your remaining balance, etc.
Windows Phone 8 will have this built into the operating system. Sadly though, existing phones can't upgrade to WP8. So bug your carrier if they do not offer an app for this yet.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Similar Messages

  • My iTunes does not show the balance

    My itunes no longer shows the balance next to my sign in name

    1.  Are you signed in  to the Store?
    2.  Do you have a credit balance?

  • Nokia N8 Calendar Does not Show the Dates????

    Hi, 
    I am noticing this issue from the past couple of weeks and probably after the last update. 
    When I open the calendar Icon, the dates do not load on the phone. It just doesnt show any dates?
    Also if a reminder is past, it shows a past reminder and the reminder also doesnt open up. 
    Whenever I do the hard re-boot i.e keep the power button pressed till it vibrates three times and shuts and re-starts, then initially the calendar shows the dates, but again after sometime if I have to open the calendar, it doesnt show the dates at all, and goes back to the same issue. 
    Please advise a good solutiong to this problem as a hard re-boot or a re-start or even re-setting the factory settings did not work
    Thanks

    Someone from the Nokia forum please respond to this as I am facing this issue too from quite sometime now. Its exactly he same.

  • My Nokia Lumia 1520 does not show reader pdf files in my documents when syncing with my Windows 8.1 desktop. Why?

    I need to wipe my phone with customer service and dont want to lose my reader documents.

    It seems to be an issue with your phone software. I would suggest to update it. I doubt this is related to Adobe Reader.
    ~Deepak

  • The Move/Copy option does not show the phones gall...

    Hello,
    I want to move some photos (wallpapers) to the phone's Gallery to use them for slide set but I can't do that... The Move/ Copy option does not show the phones gallery. It only shows the MMC, Games and My Apps. Please tell me what should I do.
    Thanks.
    Moderator's Note: Post was moved and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Because you posted this message in a thread about the Nokia 301 before, are you about a Nokia 301 as well?
    Nokia 301 » Menu » Apps » Files or Gallery » … » (do not open but highlight) your file » Options » Move. Did that help?

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

    I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
    do I have to partition it and name it first. -- if so just one partition?

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Acrobat Pro "save as" function in the file menu does not show the current directory of the file

    I have installed CC but Acrobat Pro gives me headaches.
    The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
    It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
    I use Windows7 professional 64bits.

    I use what seems to be the latest version available on the Cloud:
    To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
    So here it is, open:
    When I do a "Save as", it takes me to a totally different place on the disk!
    Very annoying...
    Thanks for your time!
    JJ

  • My playlists show how many titles are in the playlist but does not show the list of titles

    my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?

    Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
    tt2

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

Maybe you are looking for