My Nokia N 900 working too slow

Dear All,
Please help and guide me how to resolve captioned issue. Suddenly my N-900 has started working very slowly . I tried cleaning cookies going into internet options. Still the same issue is not resolved. All applications are taking long time to open.
Request your help for the same.
Regards
Girish

Hey Matthew, thanx for the response, but i dont use any of the serivce told by you. It has 26.92GB available in phone and 5.65GB available in the memory card. Only the difference is that previously i was not having 3G activated, but now got its activated and i view videos online.
Initially after the activation of 3G also the phone was working fine. But now suddenly it slowed down.
Also would request your guidance how to bring clock display on screen next to the status and network bar.
Regards
Girish

Similar Messages

SQL Developer 2.1 working too slow

Hi All,
I am working on SQL Developer 2.1 after 3 years previously I used version 1.2. Comparatively so many changes came in 2.1 version but it is too slow and while debugging variable values not shows in Tooltip we need to depend on Smartdata tab. If any settings or patches available for following problem than please provide me.
1. Too slow
2. Variable values in Tooltip
By
Srinivas M. P.

SQL Developer using 127232 KB, Free 1.32 GB
Is there any setting is SQL Developer or you talking about my system memory.
If you talking about my system memory than I am using 2 GB RAM in my system and system working well
If I do anything in TOAD than TOAD is working fine but SQL Developer working too slow.
Edited by: SrinivasMP on Feb 5, 2010 3:34 PM

Mac working too slow when switch to one to another user acconut

Mac working too slow when switch to one to another user acconut...
it means when working on one user acconut and i switch to another account its take too much loading + slower than 10.8
solve it..
Thanks

iTunes will naturally stop playing since it acknowledges that you're not actively using your current account.

Ios7 working too slow on iphone 4 ;( :(, Ios7 working too slow on iphone 4 ;( :(

Ios 7 workin too slow on iphone 4 :( :(

Settings > General > Reset > Reset All Settings.
See also to the right More Like This.

Submit Program - Copy works too slow when selecting XMLP program

Hi
Whenever I try to submit new concurrent program using copy button, if i select xmlp program, it almost kills the instance and takes lot of time ( at least 4-5 mins) before populating parameters etc whereas for non XMLP programs, it populates instantly. I did some RnD and found that the moment layout is linked to conc program, copying becomes slow.
Is it problem only I am observing or it is a general issue? I have tried this on 4-5 different instances and everywhere having same problem.
Regards
Varun

First of all i would like to thank you for all your answers!
I tryed all the sollution you proposed but nothing has really changed it speed.
1° The loops are not running in parallel, would it be faster if they were ? how do i make them run in parallel ?
2° the sequence structure was indeed reduntant, everything work nicely even without it!
3° closing the Visa sources after the loop doesn't make the program executes faster..
4° 3 seperate loops instead of one doesn't make a huge difference ...
5° Waits/Delays doesn't make the system faster (or maybe i didn't know how to use it propoerly!)
6° What do you mean by "convert the Express vi's to DAQmx code and work from there" ??
i have no ideas how i'll solve this problem, any comment or remark are very welcom !
Thank you again for your help!
Yanis

IPhone4 working too slow after ios7 update

I bought my iPhone4 1 month back and after 10 days i updated it into ios7, now my mobile is working very very slow.kindly provide me solution.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
More Tips here...
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.

Problem with my itouch 3.1.2 updated. The internet works too slow

Hi I updated my itouch to the new version from 2.2.1, before the update i didnt have problems with the internet and all was working fine but today I paid 3.99 euros for new version and what´s my surprise? When I want to download, navigate or watch a youtube video it´s extreamly slow. I istalled the update 2 times but it didnt worked. My wifi is ok and I dont´s what´s happening.
I would like you guys to help me thanks.

I have exactly the same problem!!! Files that where downloaded in 1 minute on 2.2.1 firmware now they take about an hour on 3.1.2 firmware. It's desperate!!!!
Please help!
My ipod touch is 2G and 8gb. Same internet connection, same router... only different ipod firmware.

HT5704 my iphone 4 working too slow some time it hanged because of i have too much call answer and dialled . so is there any solution about it my ios version is 6.1.2

I have problem with my iphone 4 its hanged and does not work properly my ios version is 6.1.2 so tell me how i resolve that problem i have too much coming calling and i also too much calling.

Basics from the manual are restart, reset, restore.
Try those

Nokia 5610 Bluetooth too slow!!!

My Nokia 5610 XpressMusic phone's Bluetooth is working too slow. It takes up to 3-4 minutes to transfer a files 2 megabytes in size. WHY???!!!
3310 >>> 8250 >>> 3120 >>> 6070 >>> 5300 XpressMusic >>> 6120 Classic >>> 5800 XpressMusic

It sounds your phone needs a firmware upgrade.
You can find the one nearest to you at the Store Locator
Alternatively, you can try a reset of your phone by pressing *#7370#.
CAUTION: This will erase all data on your phone.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

HP Laserjet M1132 MFP is too slow over the network!

Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.

BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know!

TCP-IP ICOM is too slow?

Hello everybody,
I am new to DasyLab (I have good experience with labview though) and am trying to build up a TCP-IP Connection between a PLC and DasyLab10 using the ICOM module . So far I managed to build up a connection and send measured data to dasylab. There it gets decoded correctly and it even displays correctly after some fine-tuning in the options of that ICOM module. But the problem is, the ICOM module works too slow for my TCP-Server.
I have two channels so far and I do send pakets with 2 floats in it every millisecond. No delimiter, no string, nothing else just 8 bytes. So its around 8kB/s. I had different delimiter in it, but some people stated out, that this could slow down the interpretation process.
I tinkered around with packet-size on Dasylab as well as sending more then 2 floats per TCP-packet with no effect. The TCP-connection gets shut down(the server does it, because of an error) within some seconds after the buffer of DasyLab filled up.
I got it working so far for a sample-rate of 1kHz and the packet-size of 1 with maximum CPU-Load on one core (With the "One Measurement per"-option: Gathermode), but only when the line-plotter is minimized. Then it behaves almost as intended. When I increase the packet-size within the ICOM module, than its gets laggy again, but the CPU-Load drops significantly. It seems to process the data considerably slower then with a packet-size of 1. It takes the ICOM Module between 2-10 seconds to process 1 sec of data depending on packet-size with higher packet-size resulting in a slower process. IThe global data-rate and packet-size does not seem to have any influence on that laggyness.
The goal is actually a sample-rate of 2,5kHz with 25channels, which would be around 250kB/s on a direct crossover FastEthernet connection. It should be possible to save all the data to hdd as well as some sort of live view of the data like a line plotter. It would be okay if the plotter only refreshes every 10th second as long as it shows the data live(with no lag, correct timestamp) and completely(every data-point sent by the server is in there, no duplicates).
The wiring diagram so far only includes one ICOM module plus a digital instrument and a line plotter. I have attached it to this message.
Is my task really impossible with DasyLab? Do I need a faster PC? It has got a Core 2 Duo 2Ghz CPU. I feel like I am missing something important to get this up and running.
Thanks in advance. Any help is appreciated.
Have a nice day
Philipp Michalski
Attachments:
Messdaten-1khz.DSB ‏18 KB

Phillip,
The module is simply not designed for high speed data. You have tried all of the settings... it suggests that DASYLab cannot keep up with the data stream even if you tell it that it's coming in at a rapid rate and to use a larger block.
The only other option is to tackle writing a driver, or having someone write a driver for you. We have two ways to do that - DASYLab 13 Full version has the Script module, or you can purchased the Extension toolkit to write a module using C.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Golive CS2 too slow on my Mac g5 to get any work done?

For the past 2 years I have been slowly building a rather large web site (about 2000 hours invested). We will be selling items we import from india (my girlfriend and I spend 3 moths a year in India) and then there is an entire section on India travel tips, photos and travel logs.
I am pleased with Golive 6.01 and recently converted my site to CS2, just to find it is very slow on my macintosh G5 and many weird bugs And site looks the same as in 6.01 when previewed in various browsers. Also in CS2 when I click on preview button, the page I want to work on closes and the page that brought me to that page pops up.
I bought a G5 macintosh which should run CS2 more quickly but:
I have yet to see my site in Explorer 7 for Windows because Microsoft did not make Explorer for Mac after version 5.0.
My question is:
Why not complete site in 6.01 and then before it is published convert to CS2. I can't get anything done with CS2 it is just way too slow.
Thanks Stuart
(Could installing 2 versions of Golive on one drive be generating the bugs?)

Hi all:
Been cleaning up Site (weird files not in my site but on desktop keep showing up as errors) got ride of them. Turned of my internet connection). Things seem to be getting better.......for now. Working on G4....will move to my G5 and see.
Might pull this one out.
Why several target files with only one source show as an error is an irratation because help says it's not really an error and can be ignored.
OH...one quick question do SOURCE files get uploaded to host when one publishes? Or perhaps a better question! Do SOURCE files need to be uploaded to host. I suspect not...but I also suspect It's OK..might just slow things down a bit?
Thanks to all of you.....this miserable world needs more like you all!
Mac
Stuart Sims aka Master Quark

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I just bought MacPro 15", i7, Quad-Core, upgraded to 8GB RAM. Its responding to slow to poen applications e.g. word, ppt, chrome etc. reboot is too slow. Dont think its working so fast. Dosenot seems to be worth to money paid. What to do?

I just bought MacPro 15", i7, Quad-Core, upgraded to 8GB RAM. Its responding to slow to poen any applications e.g. word, ppt, chrome etc. reboot is too slow. Dont think its working so fast. Dosenot seems to be worth to money paid. What to do? Not happy with Mac.

Sandeep Goyal
Jul 8, 2012 2:26 AM
Is is possible to install Win 2007 in MacPro (retina display) with USB (2.0 or 3.0) as new Mac retina display lacks DVD.
MacBook Pro with Retina display, Windows 7
They have been calling their notebook a MacPro for a year. Or is it this?
https://discussions.apple.com/thread/4463661

My Nokia N 900 working too slow

Similar Messages

Maybe you are looking for