My nokia N75 don't start

i power the phone and look like it download the software but a few seconds later a message pop ups "The phone don't start, contact the seller.

Try remove the battery for a few minutes,if the same happens again return it to a nokia care center.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Ovi Maps 3 don´t start after firmware update (6220...

    Hello!
    a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
    After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
    But Nokia Map Updater says, there are no updates for my maps.
    What´s wrong?
    Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
    thanks

    Hello!
    The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
    But in the meantime I have found a solution!!
    I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
    I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
     thanks
    sorry for my bad English

  • Nokia N75 bluetooth issues

    Hi,
    I am having issues with bluetooth on my new MacBook Pro (2.5gHz non-unibody aluminum). It refuses to pair with my Nokia N75, it just hangs at the page that says "gathering additional information about your phone." The phone pairs fine with an older PowerBook G4 running Tiger. What's going on? I'd really like to be able to tether the phone without having to resort to a USB interface, or a five-year old laptop.
    Thanks,
    Adam Johnson

    HI Adam,
    It's possible the Nokia isn't compatible with Leopard. Since your MBPro is new, since you don't have a profile, I'm assuming you are on Leopard. (It really helps us to help you if you click My Settings on the right side of the page and fill out the form then scroll down and click Save).
    Try deleting the Bluetooth pref file. That can become corrupted. Locate this file:
    com.apple.Bluetooth.plist /Users/YourName/Library/Preference. Drag that file from the Preferences folder to the Trash, empty the Trash. Try pairing the cell and Mac now.
    Check the Nokia web site support area also.
    Carolyn

  • Nokia N75 iSync support

    Now that Cingular has officially released the Nokia N75, I'm looking at it as an alternative to plunking down the big bucks for an iPhone. However, I don't see it listed on Apple's list of iSync supported phones, nor is it listed on Nokia's iSync plug-in page.
    When should I expect a solution? As new Nokia phones have come on the market, what's been the typical time lag before a plug-in is made available? Is it a certainty that one will be written for N75? Thanks to any and all responses.
    iMac G4   Mac OS X (10.4.9)  

    Well, hopefully Nokia will soon provide an official N75 iSync plug-in, but in the meantime, someone has kindly provided one:
    http://www.megaupload.com/?d=VGSB5AM0
    (Found via http://howardforums.com )

  • After IOS 8 upgrade IPad 2 don't start

    Hi,
    After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

    My ipad2 is having the same problem.  I can get it to start up by plugging the charger in.  I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

  • After add (in a wrong way)  a new disk in ASM, cluster don´t start

    Hi,
    Environment:
    Oracle RAC 10gR2
    2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
    ASM
    san storage
    Case:
    My client has tried to add a new disk (in a environment san) in ASM with the next steps:
    1. database1 and database2 are up.
    2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
    3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to  instance ASM2 was down.
    4. client tried to up +ASM2 and then , all the cluster crashed.
    5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
    6. disable oracle services in "not automatically start" and windows 2003 server start well.
    7. now oracle rac don´t start, ASM don start, instances don´t start ....
    what can I do? any idea?
    Regards.
    Laura

    Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

  • Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

    Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
    Segmentation Fault (core dumped). What i have to do?

    Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
    Segmentation Fault (core dumped). What i have to do?

  • WEB.SHOW_DOCUMENT don´t start Firefox 3.5

    Hi @all,
    I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
    I call the fmx with a JNLP File.
    There is no other browser installed on my system.
    Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
    Thanks for your suggestions.
    Thomas

    Hi,
    no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
    The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
    e.g.
    web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
    I use JDK 6 Update 16 and Forms works fine with that version.
    I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
    Thomas

  • Oracle 8.1.7 on windows 2000 don't start automatic :(

    Why Oracle 8.1.7 don't start automatic on windows 2000 :(
    Services
    Oracleora3Agent
    Oracleora3DataGatherer
    Oracleora3TNSListener
    OracleServiceORA3
    are started autamatic. (ora3 is SID)
    if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

    I've got the same problem.
    However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
    i.e NET START OracleServiceXXX
    Hope this helps.

  • Downloaded songs don't start at the beginning of the song, why?

    the songs i bought from itunes don't start at the beginning of the song,  it's just the preview clip.

    Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

  • Java Apps don't start automaticaly after system restart

    Hi,
    Since a few days ago when restarting Java application servers of SAP
    Portal, the applications deployed don't start for itselfs.
    When starting the instance, the memory stops to increase at 500mb. The
    only way to start the applications is by the manual way in:
    Server -> Services -> Deploy -> Runtime -> Application -> Start
    Application.
    After starting the applications manually the instance starts fine.
    I already increased some values in global configuration:
    From:
    InitialThreadCount = 40
    MaxThreadCount = 150
    MinThreadCount = 40
    To:
    InitialThreadCount = 80
    MaxThreadCount = 200
    MinThreadCount = 80
    After the restart the applications are not starting automaticaly yet.
    I have 4 instances. The first two instances are starting fine, but the problem is happening with the other 2 instances.
    Is there any reason for this type of behavior?
    Thanks for the help
    Pedro Nunes

    Hello Vyara,
    thanks for your reply.
    This kind of problem happens since 3 weeks ago and the stack of this system (SP09) remain unchangeble since 07.04.2008.
    The strange behavior is that the Server 1 and 2 are starting all the apps fine, but this problem is only happens in server 3 and 4.
    Can you help please?
    Thanks

  • 9iAS Release 2 (some) components don't start

    Component that don't start (Forms, DAS, ...)
    In oidmon.log is ...
    2002/12/06:12:11:34Failed to fetch Process Table. ORA-12571: TNS:packet writer failure
    2002/12/06:12:11:34Error connecting database. 12571
    2002/12/06:12:11:34Error : Guardian Process terminated
    2002/12/06:12:13:03NLS_LANG set to SLOVENIAN_SLOVENIA.EE8MSWIN1250
    2002/12/06:12:13:03Resetting NLS_LANG to SLOVENIAN_SLOVENIA.UTF8
    2002/12/06:12:13:03Starting Monitor Process, PID=1260
    2002/12/06:12:13:03ORACLE_SID not set, setting to iasdb
    2002/12/06:12:13:52[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
    2002/12/06:12:13:52[Oidmon]: Unable to connect to database, will retry after 20 sec
    2002/12/06:12:14:13[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
    2002/12/06:12:14:13[Oidmon]: Unable to connect to database, will retry after 20 sec
    2002/12/06:12:14:33[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
    2002/12/06:12:14:33[Oidmon]: Unable to connect to database, will retry after 20 sec
    2002/12/06:12:14:54OIDLDAPD Instance 1 is not running....
    2002/12/06:12:14:57OIDLDAPD Instance 1 deleted from registry
    2002/12/06:12:14:57Restarting OIDLDAPD Instance 1
    2002/12/06:12:14:58Updating Process Table...
    2002/12/06:12:14:58Updated Retry Count
    2002/12/06:12:14:58OIDLDAPD Instance 1 added into registry
    2002/12/06:12:14:58Updating Process Table...
    2002/12/06:12:14:58exit run
    Are this errors cause for not starting components, and how can I correct this ?
    thanks

    I could be wrong but...
    1) Is the TNS listener running? (and then a DB instance)
    2) Is the default SID (iasdb) correct? You might like to set the sid before you start.
    3) I had loads of problems after I accidentally tried starting emctl as root. I changed the ownership of everything back to oracle:dba and then started it as oracle and all was well.
    Maybe useful, maybe not?

  • [Solved] Libreoffice 3.6.1.4 don't start

    Hello,
    please excuse my bad english.
    I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
    I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
    Do you have any tip for me?
    Thanks Michael
    Last edited by Süerländer (2012-09-13 07:01:16)

    Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
    Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
    Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

  • After upgrading PSE 11 to PSE 12 Editor don't start Organizer do

    After downloading and installing PSE 12 (several times) Organizer start, but Editor don't start.
    While installing there are no visable error messages.
    Cotim

    The issue is still there.
    I am using Elements 11 until Elements 12 works. (I have to do my job)
    I have several times uninstall Elements 12 (incl preferences) and  reinstall the programma. (8-9 times)
    During downloading and installing I closed the virusscanner and the firewall. No Error messages
    Elements 11 is an upgrade of Elements 9 and working OK.
    The following logfiles ended with EXIT code: 0-No Error
    EO12 AMTLib Support 12.0 12-18-2013.log.gz                         3.976  18-12-2013  04
    PSE12 AMTLib Support 12.0 12-18-2013.log.gz                       3.975  18-12-2013  08
    PSE12 STI Installer 12.0 12-18-2013.log.gz                              6.355  18-12-2013  10
    Is downloading the full system maybe a solution?

  • My ipod touch don't start

    My ipod don't start. Screen show Apple logo and flashes. I try to restart holding main button and select button and nothing happen. Thanks

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If that doesn't work, go here.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Maybe you are looking for