My nokia x6 reset button broken

My Nokia x6 reset button on right top has been broken ..and couldn't turn on the phone?
can any one help me "how to solve it"?
Thanks,
sharma
Solved!
Go to Solution.

@phpsharma
Welcome to the forum!
Unfortunately there is no other solution than to take to a Nokia Care Point for repair of hardware related issue such as this.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

WRT160Nv3 reset button broken

hi all i need help ,my plastic button in router lost somewhere,i cant reset with pen or something,doesnt work i lost plastic button when i pushed long time before,router still work but i try use my home wifi conection for nokia N95 i dont remember VPA password and when i try try instal again with cd router i have code 323 - i need use old name and password when i go online to 192.168.1.1. adin pass no work i can go online,and i cant reset factory default with puss butt for 30sec cos button broken,is some other way restore default? or find my old VPA pass and recovery? thanx for any help

Well, then the only option is to try some of your common passwords or different combination of user name and password.

Nokia X6 lock button BROKEN OFF

my lock button fell off 2 months after me purchasing it.
Has anyone else had this problem, with it breaking off?
plus, i took it to the shop and they said i hav to pay to get it fixed , and i did argue it was nothing to do with me and that it was vert loose from the start.

Nokia X6 - this seems to be such a common problem. I had my phone "repaired" by O2 just a few weeks ago (unfortunately just over 30 days so my supposed rights aren't great). The new phone (the majority of my phone is new, but O2 call it a repair 'cos they've put the original motherboard in!) has just had the slide switch spring go too.
Why do 100s of people have to experience the same inconvenience before Nokia change the design and admit that it is a design fault and that the phone is not fit for purpose - unless you never use the phone, the lock switch will always go after a short time - it is not made to withstand multi-daily use. Makes me very cross that I can't now change to a (lesser) model of phone that does not have a design flaw. When will this silly switch idea be withdrawn? Still got a year to go on my current contract, but I think only solution is to put SIM into a decent phone. Sorry, but just saying it as it is.

Nokia 620 volume button broken

Hello,
as the volume button is broken, does anyone know how to change the volume without using this button ?
thanks in advance for your help,
denla

Hi Denla,
Unfortunately, the volume buttons are the only way to control the volume of the phone. May we know what happen to the volume keys?

Nokia 6111, power button broken?

I have the Nokia 6111, and I cant turn the phone on/off. It ran out of battery and is fully charged but wont turn on, any tips?
Thanks Cen

try remove battery for ten mins if no change send it to a nokia care centre
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HT1212 kids locked iphone and cant figure out password and im not able to reset phone... top button broken and itunes wont even connect to phone because its locked..... what do i do???

How to reset iphone thats locked and top button broken that itunes wont reset because i cant unlock phone??

you make an appointment at the genius bar of your local Apple Store and pay them to get your phone serviced. Then you can restore the replacement phone from your backup.

Broken reset button covered by warranty?

Whilst trying to reset up my TC, I've managed to snap the reset button.
I'm guessing this is going to void the warranty, although it didn't seem to give any, and all I did was push it in trying to feel it give any, when snap!
Any ide if this would be covered under warranty?
The trouble is, I can't now seem to get it going again, having tried every combination of restarting the MBP, TC and modem. But the MBP just won't see the TC in Airport Utility, even when connected by ethernet.
The TC is permanently stuck on a flashing amber light, and the sound of either the fan or HD spinning noisily.

Yeah - I'm going to be making an appointment at a Genius Bar in the next few weeks just before we go on holiday to get them to give the MBP a health check, as its been suffering from this :
http://www.hpwebdesign.co.uk/macbook/macbook.html
So will take the TC along as well. Unfortunately I don't have phone support, and wouldn't be able to follow their instructions anyway, what with the reset button being broken.
See what they say anyway - they might have ways and means of doing something.

Broken Reset Button on SG 300 Switch - Need to reset

I can't seem to reset my switch and realized the reset button is missing/broken off. Is there an alternate method to reset the switch to factory settings? If not, how do I figure out the IP of the web interface, it is not the default.

Mark,
Is the web interface simply not loading or do you not have the password? Your DHCP range does not matter unless there is another device on the network that is currently assigned 192.168.1.254. If that is the case you will have trouble accessing the web UI. It is usually easiest to plug ONLY a PC and the switch together and assign a static IP to the PC:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: None
DNS Servers: None
This will allow you to access the switch without interference from other network devices. Remember to change the PC back to DHCP when you are done. If you do in fact have an IP conflict you should also change the switch to a different static IP.
You can also access the switch using a console cable. You can check the settings and see if the web interface has been disabled or you can reset the password in case you lost it. Check the Admin Guide for details:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
Let us know if you have any other questions.
- Marty

Reset button is broken. Which pins do I short to reset my Airport Extreme to factory defaults?

I'm working on a 4th Generation Airport Extreme A1354. I do not know the password and I was not able to perform the software, hardware, or factory default reset procedures. (I never got the fast blinking amber light.)
I suspected a broken reset switch and took the gray cover off to find the reset button was indeed broken. Upon slight maneuvering, the button fell off the board.
I think I can perform a factory default reset by jumpering where the reset switch was. Which pins do I short to perform the factory default procedure without the reset button working?
Trying to upload pictures that show my issue.

I don't often work on extreme.. mostly Time Capsule.. but the switch is surface mount.. no pins go through the board.. you will need to lift the board right out of the frame, (it all comes out in one piece and is fairly easy to do).. and you will need to short the two pins right at the switch .. but hopefully with it right out the switch itself will become accessible.

Inactive (or broken) reset button on my Ze

Hello! I recently tried using the recovery tool on my zen V to diagnose any issues. The player had been charging on the computer for some time but was not being recognized by the computer itself (not unusual). So when I tried to use the recovery tool, it obviously said there was no player connected and thus couldn't continue the diagnosis. That is fine and dandy but the problems now are much much worse... After that, I tried removing it and re-plugging it in. The player was detected but not recognized by the computer (strange, I've used it on this computer before). I wasn't overly concerned yet but then the player itself started acting strangely --> freezing while "restoring library". I used the reset button and went to the recovery mode to reboot the player. The player rebooted successfully and restarted the song it had cutoff when the battery died. I tried going to other menus and then the player froze again. Once again, I used the reset button to get into recovery mode and tried to re-boot. It once again froze when trying to restore the library... so I tried the reset button yet again. Finally it loaded, started playing the song again and when I tried switching the menu, it froze YET again! Now, my reset button will not work and it is stuck with the screen on, sitting in the menu section. Does anyone have any suggestions as to what I can do I've owned the player for < year.

Mark,
Is the web interface simply not loading or do you not have the password? Your DHCP range does not matter unless there is another device on the network that is currently assigned 192.168.1.254. If that is the case you will have trouble accessing the web UI. It is usually easiest to plug ONLY a PC and the switch together and assign a static IP to the PC:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: None
DNS Servers: None
This will allow you to access the switch without interference from other network devices. Remember to change the PC back to DHCP when you are done. If you do in fact have an IP conflict you should also change the switch to a different static IP.
You can also access the switch using a console cable. You can check the settings and see if the web interface has been disabled or you can reset the password in case you lost it. Check the Admin Guide for details:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
Let us know if you have any other questions.
- Marty

1st Generation Time Capsule reset button broke

Hello everyone I have a 1st Generation Time Capsule 500gb that I purchased used and do not have the password for AND
the reset button is BROKEN!!!
Is there anyway to reset it without the rest button working??
I bought it to upgrade it to a 2TB drive that i already own .
Thank you guys !!!!!!!

When you open the TC to replace the hard disk you will be able to press the reset. You might also be able to fix the reset lever arm.. I have found them simply forced so far back it was bent.. and no longer able to go back.. once inside the box, I can bend it back to the correct position.. but it is a plastic hinge.. and no plastic hinge likes being bent at any time.. If it has snapped right off, or snaps off attempting repair don't worry about it.. once reset, just keep it at default or write the password on a sticker and place it on the bottom.
http://www.ifixit.com/Device/Apple_Time_Capsule
Please pay attention though to Bob's comments.. fixing the power supply is going to be necessary in the near future. Especially if you put in a large drive with high start current for the hard disk. There are lots of people who find the upgrade of the hard disk is closely followed by power supply failure or it won't even start the new hard disk.. depending on type and current demand. It is much much more for some disks even if the drive has lower consumption.
If you are a DIYer it is not expensive to fix power supply or better replace it.
Although I have suggested several repair methods this is probably the cheapest.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/cisco-adp-30rb-4pin-molex

IPhone 4 lock button broken, won't turn on

iPhone 4 lock button broken, used assistive touch for the last several months. Today iPhone turned off in my pocket and is unresponsive to even plugging it into charger. Is there any way to get it to restart?

There is nothing you can do as you won't be able to reset the device.
You can wait until the battery goes flat then try connecting it to power so it restarts. If the same issue occours then you'll need to restore it on iTunes by entering recovery mode.

I broke my nokia E75 power button.

I broke my nokia E75 power button. Every thing is ok. It's chargeing no internal problem. But my phones power button is broken now. Is there any way to on it without using the power button?
I know it's kind of wierd using old version nokia phone. But it's my fevrt phone..
Any ideas guys??
How can i on it??

Sadly you cant you will have to try get it repaired or replaced and at this stage i would say it may be easier to find a replacement then have it repaired.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Zen X-fi cannot be turned on and reset button is useless

Hi, I, ve been using my new zen x-fi 8gb for almost a month, i've tried transffered any media files and the player was working ok. however, today my player does not want to start at all and i tried pressing the reset button but nothing happen. i also tried to connect it to my PC (XP SP2), and all i heard was the blip sound from my PC, but my PC does not detect my mp3 player nor my player turned on. I've tried to connect it to the back usb port, plug it to ps2 and wii usb port, but still does not work.
additional information:
. i fully recharged the player last night
2. i tried half connect my headphone to the playe, and i still hear a hissing noise from the player when i tried to turn the power on, but still nothing appear
3. i just tried the tips that required to press and hold play button, press the reset and slide the power button, but didn't work
thanks for the help, i really need every suggestion
Message Edited by dewa_botak on 06-2-2009 09:2 PMMessage Edited by dewa_botak on 06-2-2009 09:3 PM

Your screen may be broken? Its still inder a one year warranty.

Ultrabeat - reset button

HI
The reset button on Ultrabeat doesn't seem to be having any effect at all. When in Step mode pressing it does not make the values of the selected parameters (re)set to one?
Manual
• Reset: All off set values for the selected parameters set to 0(no offset).
• A second click on the Reset button removes the parameter from the off set menu.
Note: The Reset button at the left of the velocity/gate row changes to Delete when
clicked once. This Delete button mirrors the behavior of the Delete command: It deletes
all steps for the currently selected parameter.
I am finding that none of what the the manual says above actually works
Is anybody else finding this? In L8 I'm sure that the reset button did something.
Thanks

zalermon, welcome to the discussions!
There is a workaround for the broken reset button, but the trick will be to get AirPort Utility to identify the Time Capsule (TC) so that you can access the menus.
Power down the TC for a few minutes as well as your computer. Connect an ethernet cable from one of the LAN ports on the Time Capsule directly to your computer.
Restart the TC and let it run for a few minutes, then restart your computer and open AirPort Utility to see if the application can "see" the TC. If this is not successful at first, leave AirPort Utility open for 10-15 minutes. Sometimes the TC will just "appear" after a period of time.
If you can get Airport Utility to see the TC, click on Manual Setup.
Now go the the Base Station menu at the top of your screen in the toolbar next to the Apple icon. Select "Restore Default Settings". This will accomplish the same task as a hard reset and will return the TC to factory defaults.
Once the TC restarts, you may need to repeat the procedure to find the TC so that you can reconfigure it.

My nokia x6 reset button broken

Similar Messages

Maybe you are looking for