My Notebook (DV6166TX) shutsdown without showing any errors.

Hello Guys, I have HP notebook DV6166 TX last month i change my battery from 6 cell to 12 cell battery it works fine for few weeks but then i start facing the shutdown issue.
My notebook suddenly shutsdown without any message display when ever power is not plugged in and its using battery then i detach the battery and again attach the battery.. its starts working again. It never shuts down when power is plugged in.
I dont know is it because of new battery of there is some problem with my notebook..
I am using WIN 7 home edition/
Any help would be really appriciated.

Hello HaroonK,
Welcome to the HP Forums!
I understand the computer will randomly shut down when the battery is connected. Normally, a new battery has to be calibrated before it can be used. Sometimes, an un-calibrated battery will behave like this. I can provide an HP document with instructions on how to do this: Testing and Calibrating the Battery (Windows 7)
Following this document will allow you to successfully calibrate the battery. Additionally, it will test the battery for any issues it might have. Please try all of these steps and let me know what happens!
Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

IMAC G5 shuts off by itself without showing any errors

My Imac G5 will shut off when it is left in the sleep mode for 2 or more hours. The system will come back on when turned back on and does not show any errors. Everything seems to be running great except for the fact it shuts off by itself. Please Help!!!!!!!

Hello! See if this Apple Doc applies to your computer. Tom
AutoShutdown

Maxl Automation for sequential calc scripts - just stops without giving any error

Hi,
I was running an automation for calculations using MaxL. by scheduling the Steps.bat in the task scheduler of windows.
_________ Steps.bat ___________
StartMaxl Steps.mxl
_________ Steps.mxl ___________
Login .....
Sppol on to log.log
Execute calculation 'DB'.'DB'.StepA1;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA2;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA3;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA4;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA5;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA6;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA7;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA8;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB1;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB2;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB3;           Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB4;           Iferror 'StopError';
define label 'StopError';
exit;
Not when I check the log file on execution it shows ...
___________________ Log.log _______________________
MAXL> execute calculation 'DB'.'DB'.'StepA1';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepA1.csc] : [173.87] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepA8';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepA8.csc] : [2000.00] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepB1';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepB1.csc] : [1200.00] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepB2';
If you see the last line - it just halts - doesn't show any error or any other message. And the task in the windows task scheduler keeps showing the task as running - without any error there as well.
Any ideas on why it is just going to a limbo (no sessions also appear on EAS console)
Ankur

Yes the script can be manually executed. Also if I again put a mxl file starting from the step where it last stopped - it continues execution normally. (i.e. executes StepB2 as well and continues executing)
And today's execution result - I kept monitoring the server, it ran for 3hrs and then halts after around 80% of the steps with 20% were still remaining. I created a new Mxl to start from the last 20% and it ran successfully again.
@Amarnath : Restart database ?
I checked the logs - and this is what I can see (modified the big fields to show what the logs are showing)
[Wed Oct 9 09:54:43 2013]Local/....... Ankur.....
Calculation executed
[Wed Oct 9 09:54:43 2013]Local/DB///47450147858752/Info(1013210)
User [Ankur.....@Native Directory] set active on database [DB]
[Wed Oct 9 09:54:43 2013]Local/DB/DB/Ankur......
Received Command [Calculate] from user [Ankur......@Native Directory]
[Wed Oct 9 09:54:43 2013]Local/DB/DB/Ankur......
Received Command [Calculate] from user [Ankur......@Native Directory] using [StepB2.csc]
[Wed Oct 9 10:24:59 2013]Local/DB///47341561242320/Info(1002035)
Starting Essbase Server - Application [DB]
[Wed Oct 9 10:24:59 2013]Local/DB///47341561242320/Info(1200480)
Loaded and initialized JVM module
[Wed Oct 9 10:24:59 2013]Local/DB//47341561242320/Info(1200445)
External [GLOBAL] function [@ESSBASEALERT] registered OK
[Wed Oct 9 10:25:01 2013]Local/DB//47341561242320/Info(1019008)
Reading Application Definition For [DB]
So indeed the essbase server is starting again - but why ?
Ankur

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Report Builder get shut down... without generating any Error Message

Hi Every One,
I am generating the reports in Report Builder 10.1.2.0.2. And the report is based on the view, when I want to generate the PDF, the report builder get shut down without generating any error message. But I can run the report to see live Preview (Paper Design ).
What can be reason that its not generating PDF file format.
Thanks in Advance for your time.

Hi Saumen,
I don't think so that .. I have memory problem or some other issue on the hardware side .. bcos I used the same report builder on same machine against the same instance.. to generate the 70K pages PDF file ... but nothing happened ...And this report is fetching only 10 records. during the execution of the report, Report Builder get close. without generating any message. without keeping any processor busy.
I am feeling that report builder try to write in the PDF file format .. but unable to write.. may b some thing is wrong on the privileges side of the VIEW. But I have Select Priv on the view.
When I try to trace the report, I got the message in the trace file that " Report Aborted on user request"
Thanks,
Mohsin

Installation of weblogic 6.1 suuenly aborts without giving any error

Hi
i am trying to install weblogic server 6.1 in the following configured machine:-500 Mhz
256 MB RAM 40 GB harddisk with WIN NT workstation as the operating system.The installation aborts without giving any error ?? please help..it extracts 100% and then aborts installation without any error
rishi

Hi.
Pls search the archives of this newsgroup. This has been reported several times and a few solutions have been found and posted here.
Thanks,
Michael
rishi wrote:
Hi
i am trying to install weblogic server 6.1 in the following configured machine:-500 Mhz
256 MB RAM 40 GB harddisk with WIN NT workstation as the operating system.The installation aborts without giving any error ?? please help..it extracts 100% and then aborts installation without any error
rishi--
Michael Young
Developer Relations Engineer
BEA Support

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

If Photoshop crashes the should be a System crash report generated by your OS. For example Windows

Time machine : started the restoration, stopped mid-way and didn't show any error message

Hi, i made a complete backup of my system to be able to install windows 7 via bootcamp. I had to backup because a complete format was necessary.
I reinstalled Mac OS X 10.6 (the exact same version i had) everything works just fine. I started the time machine so i could have everything i had before i formatted. The restoration started normally and continued until about half. Then, the transfer window dissapeared, not showing any error message. I don't see my disk image that i was copying. It's nowhere to be found.
And now, i can't even try again because there's 150 GB that i can't seem to find anywhere (which is about half of my backup) and there is not enough space on my hard drive anymore. I try to find what was copied and there is nothing.
Please HELP ME !!!

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

How to raise exception in bor method without showing runtime error

I want to raise custom exception in the bor method like below. However, it will show runtime error when executing codes below. Any knows how to raise custom exception in the bor method without runtime error?
raise 9021.

Hi Nick
You need to define the exception 9021 for the method and then you use the macro EXIT_RETURN as below
exit_return 9021 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards
Ravi

WHEN OPENING A FILE WITH FIREFOX MULTIPLE FILES KEEP OPENING IN RAPID SUCCESSION WITHOUT SHOWING ANY CONTENT AND THIS DOES NOT STOP AND I CANNOT SAY HOW MANY FILES I HAVE

THERE IS A PROBLEM IN OPENING ANY FILE. WHEN OPENING - A RAPID SUCCESSION OF FILES OPEN, ONE ATOP THE NEXT, WITHOUT SHOWING FILE'S CONTENT. THIS CONTINUES FOR QUITE A WHILE. I MUST TURN OFF COMPUTER. IT IS NOT POSSIBLE TO CHOOSE ANY OTHER FUNCTION WHILE THIS IS HAPPENING, IE : WHEN OPENING A FILE. AS IN , I CANNOT OPEN GOOGLE OR MAIL, ETC. AND THE FILES KEEP OPENING AS UNTITLED. SO I AM NOT ABLE TO OPEN ANY ONE FILE, AND SEE ITS CONTENT, THEY JUST KEEP STACKING LIKE EMTY PAGES ONE ON TOP OF THE NEXT.

THANK YOU
THAT DOES NOT SEEM TO BE THE ANSWER
I HAVE A MAC
BOUGHT IN 2008
AND I DO NOT SEE THAT I HAVE A STUCK KEY
PERHAPS I AM NOT UNDERSTANDING WHAT YOU MEAN

The app gets killed on navigating to one or two views without showing any crash logs. How to check the cause of crash?

On launching the app, it works fine upto two or three pages and gets killed after some time. Currently not able to figure out what is the reason since its not showing any logs in device as well the project. In case there are memory issues , how can I fix them?
logs:
Apr 28 03:56:30 SETLPERV-iPad com.apple.launchd[1] (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba][2294]) <Notice>: (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba]) Bug: launchd_core_logic.c:3733 (25562):0
Apr 28 03:56:30 SETLPERV-iPad UserEventAgent[12] <Notice>: jetsam: kernel termination snapshot being created
Apr 28 03:56:30 SETLPERV-iPad com.apple.debugserver-64[2292] <Warning>: 1 [08f4/1303]: error: ::read ( 4, 0x2ff719d4, 1024 ) => -1 err = Bad file descriptor (0x00000009)
Apr 28 03:56:30 SETLPERV-iPad com.apple.launchd[1] (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba][2294]) <Notice>: (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba]) Bug: launchd_core_logic.c:3732 (25562):3
Apr 28 03:56:30 SETLPERV-iPad com.apple.launchd[1] (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba][2294]) <Notice>: (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba]) Assuming job exited: <rdar://problem/5020256>: 10: No child processes
Apr 28 03:56:30 SETLPERV-iPad com.apple.launchd[1] (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba][2294]) <Warning>: (UIKitApplication:9K7XF2E952.com.infosys.mconnect[0x34ba]) Job appears to have crashed: Segmentation fault: 11
Apr 28 03:56:32 SETLPERV-iPad ReportCrash[2299] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Apr 28 03:56:32 SETLPERV-iPad ReportCrash[2299] <Notice>: Saved crashreport to /Library/Logs/CrashReporter/LowMemory-2014-04-28-035632.plist using uid: 0 gid: 0, synthetic_euid: 0 egid: 0

Use Instruments to Profile the app.
You can use Heapshots to see where memory is being allocated but not released.

SQL Script in XE Cancels during Execution without returning any error(s)

Hi all;
I'm running a SQL script with a drop table and create table statement along with several hundred insert statements to load data into this table in a Oracle 10g XE database. There's a total of 213 SQL command lines in the script. (1 Drop Tbl/1 Create Tbl/211 Insert(s)).
I run the script within the Script Editor in the Oracle XE web interface and it processes 45 of 213 of the SQL commands in the script successfully(1 Drop Tbl/1 Create Tbl/43 Insert(s)). Then the Manage Script Results screen shows a status of "Canceled". It doesn't even attempt to insert the other rows and spit back any error messages. I tried debugging by checking the consistency of the insert statements at the break point and couldn't find any discrepancy. The script just stops executing and shows this cancelled status? Can anyone help me figure out why all the lines of this script aren't being executed? I'd appreciate it a lot!
Thanks.
-GM

I've spooled output to a file which I've pasted below in italic pre-tags. I abbreviated some of output to save space in this thread. I didn't want to include 600 rows showing "1 row created" 211 times with 3 spaces between each of them. So here is my abbreviated output:
SQL> set define off;
SQL> @\Oracle\UTC_Upload_100807.sql;
Table tbl_UTC_HPS_Report dropped.
Table tbl_UTC_HPS_Report created.
211 rows created.
SQL> describe tbl_UTC_HPS_Report;
Name Null? Type
STATUS VARCHAR2(255)
CUSTOMER_NAME VARCHAR2(255)
CUSTOMER_NUMBER VARCHAR2(255)
LICENSE_DESCRIPTION VARCHAR2(255)
CONTRACT_DATE VARCHAR2(30)
CONTRACT_NUMBER VARCHAR2(255)
QUANTITY NUMBER(5)
INVOICE_DATE VARCHAR2(30)
INVOICE_CCY_CODE VARCHAR2(30)
INVOICE_NUMBER VARCHAR2(255)
SUPPORT_PROGRAM VARCHAR2(255)
RENEWAL_START_DATE VARCHAR2(30)
RENEWAL_END_DATE VARCHAR2(30)
INVOICE_AMT VARCHAR2(255)
INSTANCE_NUMBER VARCHAR2(255)
SQL> select * from tbl_UTC_HPS_Report;
STATUS
CUSTOMER_NAME
CUSTOMER_NUMBER
LICENSE_DESCRIPTION
CONTRACT_DATE
CONTRACT_NUMBER
QUANTITY INVOICE_DATE INVOICE_CCY_CODE
INVOICE_NUMBER
SUPPORT_PROGRAM
RENEWAL_START_DATE RENEWAL_END_DATE
INVOICE_AMT
INSTANCE_NUMBER
ENTERED
STATUS
CUSTOMER_NAME
CUSTOMER_NUMBER
LICENSE_DESCRIPTION
CONTRACT_DATE
CONTRACT_NUMBER
QUANTITY INVOICE_DATE INVOICE_CCY_CODE
INVOICE_NUMBER
SUPPORT_PROGRAM
RENEWAL_START_DATE RENEWAL_END_DATE
INVOICE_AMT
INSTANCE_NUMBER
United Technologies Corporation
STATUS
CUSTOMER_NAME
CUSTOMER_NUMBER
LICENSE_DESCRIPTION
CONTRACT_DATE
CONTRACT_NUMBER
QUANTITY INVOICE_DATE INVOICE_CCY_CODE
INVOICE_NUMBER
SUPPORT_PROGRAM
RENEWAL_START_DATE RENEWAL_END_DATE
INVOICE_AMT
INSTANCE_NUMBER
The last select statement above results in continuous spitting out of column headings with no data. I've truncated it here to save space. When I go through the Oracle Database XE web front end I see that the table was created; however it says "This table has no data". So still no luck. Hope you can help. Thanks.
-GM

Cups: Printer doesn't print anything but cups doesn't show any error

I installed cups on my brand new machine. For some test pages, my HP LaserJet Professional 1102w worked as expected. Then, for no apparent reason, it stopped printing althoug I can't see any error messages. The print jobs just show up as "completed at Sat 11 Dec ...". Printing on the same printer works when it's plugged to another machine.
The printer is 'hp'. The 'hp_laser' printer which appears in the log is the same printer on a network host.
/etc/cups/cupsd.conf (pretty much default, just changed LogLevel and Port)
http://paste.pocoo.org/show/303448/
/etc/cups/client.conf
ServerName localhost:631
dmesg output (printer was plugged in after bootup, before /etc/rc.d/cups start)
http://paste.pocoo.org/show/303449/
/var/log/cups/error_log
http://paste.pocoo.org/show/303452/
/var/log/cups/page_log
hp 30 anonymous [11/Dec/2010:10:44:14 +0100] 1 1 - localhost Test Page - -
The printer was installed using hp-setup.
I would be very thankful for any hint.

Any updates on this? I'm having a similar issue, except it's on a printer I've been using for a long time and only certain PDFs are causing problems. Some PDFs print fine, but for others I am only able to print a few pages (and then the printer stops and it looks like the job was completed, except for the missing pages in the output tray).

MxiFindDevLA() crashed without return any error code

Version 2.1.1 of the VXI library returns 0xffffffff, error code.
Version 3.2 and 3.3.1 simply crashed the application with returning any error code.
Can you please tell me if there is any update within the mxiFindDevLA() function that's causing the problem?
side note: there is no pci-mxi2 hardware installed on the system.
Ken

Ken-
I think in order to best answer your question we need additional details about your setup.
First, "mxiFindDevLA" is not an NI function. We provide an operation called "FindDevLA" which is probably related, but it sounds like someone (perhaps an instrument driver?) has provided a new function which may have behaviors we are not expecting. One step that would help us determine what the operation does would be for you to attach the output of NI Spy when your application runs.
Also, I am confused by your side note. FindDevLA (which might be used by mxiFindDevLA) is an NI-VXI API operation. All NI-VXI API operations MUST be run after InitVXIlibrary succeeds. InitVXIlibrary will not work (it will return an error) if there is no controller in your sy
stem. From your side note I can't tell if you have no controller at all, or just some other controller that is not a PCI-MXI-2.
If you can provide this additional information it would assist us in debugging the problem. FindDevLA itself is a simple operation which compares the settings you provide against the device info fields for each logical address in your system. It could cause a crash if you pass in an invalid pointer for the logical address parameter, but that was true in NI-VXI 2.x as well, so I look forward to any additional information you can provide.
-Scot

Is there any way of viewing an image bmp/jpeg etc. on full screen in LabVIEW, without showing any toolbars?

We require a VI to show an image,covering the entire screen without any visible toolbars. This image will be used as a projector output so it is necessary for no other items to appear. This VI would be run simultaneously with a motor control VI. Please help!!!

Hello,
You can set up a VI to be displayed as "dialog", which will remove all toolbars and scroll bars when it runs. This is done by going to the "VI Properties", selecting "Window Appearance", then choosing "Dialog". I have attached a sample VI that demonstrates how I would do this...it simply shows a picture in a picture control, and has a delay to show you the dialog appearance (no toolbars).
I wrote this example in LabVIEW 6.0.2...hopefully this is the version you are using.
Please let me know if you have any other questions, and have a pleasant day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

My Notebook (DV6166TX) shutsdown without showing any errors.

Similar Messages

Maybe you are looking for