My notebook laptop start beeping after hp screen when i turn on my laptop.....

1. product name and number--- hp pavilion dv7-1260us notebook entertainment pc
2.operating system installed--- windows 7 64-bit
3.error message--- when i turn on my laptop it starts beep sound continuously after hp screen and touch pad also not working properly cursor continuously goes down automatically....
4. i jus installed windows updates.....

Hiya,
Is the beep sound happen while loading Windows? Is it coming from the speakers?
Have you tried your cursor in the Recovery Manager to see if it's a software issue? When the BIOS HP logo is on the screen press F11 to load recovery manager. If mouse works normally then you have a software issue, if issue still percists it is most likely hardware based.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Similar Messages

I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

TS1388 hello..i am getting a screen when i turn my laptop on theta says OSX utilities....restore, reinstall osx or disk utility....what does this mean

Hello.. I am getting a screen when i turn my laptop on startup says OSX utilities....restore, reinstall osx or disk utility....what does this mean?

Hi, that sounds like it's booting from a Restore partition, but that is only for 10.7 & up, you list 10.6.8 though.
Anyway, hold alt key at bootup, what boot choices are shown?

Text in after logon screen when logging on with"customer reserve" language

Hello
I wander how could I set text in after logon screen when logging on with"customer reserve" language. Namely instead:
SAP user name             XURUZRJ
Last system logon         27.03.2014
                 at       11:45:17
Copyright(c) SAP AG 2002.
All rights reserved.
License w/o expiration
This software product, marketed by SAP AG
or its distributors, includes proprietary
software components of Oracle Corporation.
Copyright (c) Oracle Corporation 1979, 2004.
All rights reserved.
Oracle is a registered trademark of Oracle
Corporation and/or its affiliates. Various
product names referenced herein may be
trademarks of Oracle Corporation
I get:
SAP user name             XURUZRJ
Last system logon         27.03.2014
                 at       12:23:42
Thank you a lot in advance
Jan

Hi Jan,
Refer SAP note
1149795 Translating English Customizing entries into German
Process specified can be used to change the text from local language to English.
Hope this helps.
Regards,
Deepak Kori

White screen when I turn the Satellite M50 on

I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
Thanks

Thanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
EDIT:
Problem solved. High temperature caused this issue
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402

My ipod comes up with a green screen when i turn it on. I did once eject it safely like a flash drive instead of through itunes. What exactly is wrong with it and can it be fixed?

My ipod comes up with a green screen when i turn it on. I did once eject it safely like a flash drive instead of through itunes. What exactly is wrong with it and can it be fixed?

What exactly is wrong with it and can it be fixed?
If you have AppleCare and/or iPod Nano is still under warranty, give them a call. If not, take the computer to your local Apple Store or AASP. The staff will tell you what is wrong w/it and let you know if it can be fixed after it is examined.

Why won't my iPad 1 suddenly not rotate the screen when I turn it?

My iPad 1 won't rotate the screen when I turn it. What is wrong?

Hi nugget,
Do you have the Lock Screen switch in the wrong position? It's the switch on the right side just above the volume switch. Try moving it to the opposite position to see what displays on the screen. If the rotate arrow displays, then you are good to go....
Cheers,
GB

My iphone 4s will not switch to the wide screen when I turn my phone sideways from an upright position, does anyone have any suggestions to get this feature working again? Thanks.

Is there an on or off button for this feature, as the screen on my phone will not switch from upright to the lengthened screen when I turn the phone sideways. My phone is very new, just got it beginning of July of this year (2012). Has this happened to anyone?
Thanks

Is orientation lock on?
iPhone User Guide (For iOS 6 Software)

My ipod just goes to a white screen when i turn it on

my ipod just goes to a white screen when i turn it on

A white screen is one of those symptoms covered here:
iPod touch: Hardware troubleshooting

Why does my Mac stay on the white screen when I turn it on?

Why does my Mac stay on white screen when I turn it on?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 4
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 5
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 6
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 7
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 8
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 9
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 10
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody

pls help...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

White screen when I turn on the computer

My Macbook Pro would not let me click on anything so I restarted my computer by holding down the power button, but then it stayed at a white screen for awhile, then turned to a blue screen before my login screen poped up. It let me log in but then would not let me click on anything after that. When I moved the mouse cursor where my dock would be it does not appear. Then after a half hr of it still not allowing me to do anything I restarted it again and now it is stuck at a white screen. I am not sure what is going on because my computer was working completly fine yesterday. Im not completly positive on my operating system, but I know its a 10.5 something.

That happens. One day it works fine the next not at all.
Do you have the original system discs that came with the system? Id you do get the OS reinstall disc and insert it into the DVD drive and reboot (hold down power button until the system shuts down then pres the power button again to start it back up). When it is starting hold down the Option key and if a screen comes up, other then the white screen, select the DVD disc to boot from. If that starts up then open Disk Utility and check the SMART status of the drive and Repair Disk and Repair Permissions.
But I suspect the drive has failed and will need to be replaced.

Black screen when I turn on Satellite M

When i turn on the notebook, i cant get into the system, just black screen, after i tried several times, then i can get into the windows system.
What is the problem???
Tanks ,buddy

Hi
Are you able to access the BIOS?
If not then there could be a motherboard problem
Did you try to connect the Satellite notebook to the external monitor to check if something would be visible on second screen?
I think this would be helpful to get more information about possible hardware issue
If an second display would stay black too, then an graphic card issue might be possible
However, I doubt you could fix it yourself. In most cases its a job for an technician

My ipod touch 4g, has a white spot on the screen when you turn it on, what is that and how do I fix it?

When you turn the ipod on, there is a noticeable white spot on the screen/display. Once all the apps come on you can't see it, but when it starts up you can.

From you descriptionis is hard to tell if it a atain on the outside of the screen or just what. Have you tried cleaning the screeen as said in the users guide:
Cleaning iPod touch
Clean iPod touch immediately if it comes in contact with any contaminants that may cause stains,
such as ink, dyes, makeup, dirt, food, oils, or lotions. To clean iPod touch, disconnect all cables and
turn off iPod touch (press and hold the On/Off button, then slide the onscreen slider). Then use a
soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don’t use window cleaners,
household cleaners, compressed air, aerosol sprays, solvents, alcohol, ammonia, or abrasives to
clean iPod touch. Rubbing the screen with an abrasive material may scratch the glass.
For more information about handling iPod touch, see the iPod touch Important Product Information
Guide at www.apple.com/support/manuals/ipodtouch.

Lines Come Up on Screen When I Turn Up Brightness

Whenever I am outside i can't see the screen because when I turn the brightness past 50% lines will appear and I won't be able to access anything. Does any one have a solution?

Hi jtbvincent,
Thanks for visiting Apple Support Communities.
It sounds like you are seeing lines on your iPhone display when the brightness is turned up, and I know that must be disconcerting. I have a few steps to suggest that can help resolve or isolate the behavior.
First, restart your iPhone:
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
You can find the full article with these steps here:
Turn your iOS device off and on (restart) and reset
If the lines are still there after you restart the iPhone, I recommend that you back it up and restore it using iTunes:
Back up and restore your iPhone, iPad, or iPod touch with iCloud or iTunes
Use iTunes to restore your iOS device to factory settings
All the best,
Jeremy

My notebook laptop start beeping after hp screen when i turn on my laptop.....

Similar Messages

Maybe you are looking for