My notes app recently stopped working on Mac Pro

notes app stopped working. Iphone and ipad's working well, but notes app stalls and just says 'updating'. Macpro, late 2011, most updated mavs version. help. thanks.

Uncheck Notes in the iCloud preference pane. Does it work now?

Similar Messages

  • Mountain Lion 1.8.2 update made my dual monitor stop working on Mac Pro mid 2012

    Just done Apple's update for Mac OS X Mountain Lion to 1.8.2 and after rebooting my dual monitor stopped working.
    If I go on preferences -> Displays it shows me only one of my two monitors, even if I invert the connections the 2nd monitor doesn't shows up and there seems no way to enable it again.
    Any suggestion?
    P.S. I already tried to set from "Best for display" to "Scaled", but after rebooting Mountain Lion 1.8.2 reset it to "Best for display"

    Ok,
    did some extra test here, but first of all my configuration:
    Mac Pro (Mid 2012) with ATI Radeon HD 5870 1GB.
    2 LCD 24" Wide-screen (1st monitor Hyundai W240D and 2nd Monitor HP w2448hc), both LCD worked perfectly until reboot after installing OS X 1.8.2
    After reboot only the 1st monitor wored fine, the 2nd not even listed, so tried to invert cable connections on the 2 miniports on the ATI video card, but nothing changed, still only the 1st monitor working.
    Did a second test, disconnected the 1st monitor and connected ONLY the 2nd and now the second works fine.
    Tried to connect 2nd monitor on a different miniport, and i still works fine.
    Updated my MacBook Pro to 1.8.2 (it as an nVidia card) and connected my 2nd monitor to it and everything works fine, both the laptop LCD and my HP LCD are working fine.
    So it looks like Apple screwed up the ATI driver on the latest 1.8.2, now only ONE miniport is active.
    To all users with the same Mac Pro configuration: hold to update to Mountain Lion 1.8.2 until Apple fix this driver issue.
    More info are on the Console output, so will have to contact Apple on-line support to signal this bug.

  • Audio interface console (app) won't work on Mac Pro

    Hello there!
    I just bought a new Mac Pro and did a clean install of all my apps. Everything seems to be working fine except one thing: my audio interface's console.
    I'm using an Audiofire 4 interface, which has little physical controls on it. I've been using its console software on my iMac and on my MacBook Pro to control it. Last night I installed the software from the CD on the Mac Pro and it won't work!
    I launch the application from my home folder on my boot disk (SSD). I also tried installing it on the data HDD and still no luck: when I try to launch it it closes immediately. All my macs are on the same version of SN so that shouldn't be the problem.
    Anyone has a few ideas? I use my computer a lot for music so this has to work or I may have to return to the iMac...
    Thanks in advance!

    Update: this morning I installed the Audiofire Console successfully on my Windows partition (on another hard drive). I then came back to OSX (on my SSD) and this time the app, instead of immediately opening and closing, beachballed the whole system. The console gave me this:
    11-03-11 12:35:52 kernel utunctlconnect: creating interface utun0
    11-03-11 12:35:53 com.apple.SecurityServer[28] Session 0x181a837 created
    11-03-11 12:35:53 com.apple.SecurityServer[28] Session 0x181a837 attributes 0x30
    11-03-11 12:35:53 com.apple.launchctl.LoginWindow[100] launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    11-03-11 12:35:54 loginwindow[50] Login Window Started Security Agent
    11-03-11 12:35:54 SecurityAgent[107] User info context values set for MacPro
    11-03-11 12:35:54 SecurityAgent[107] Login Window login proceeding
    11-03-11 12:35:54 SecurityAgent[107] Login Window done
    11-03-11 12:35:54 loginwindow[50] Login Window - Returned from Security Agent
    11-03-11 12:35:54 loginwindow[50] USER_PROCESS: 50 console
    11-03-11 12:35:54 com.apple.launchctl.Background[109] launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    11-03-11 12:35:54 com.apple.launchctl.Aqua[110] launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    11-03-11 12:35:54 com.apple.launchctl.Aqua[110] launchctl: Dubious permissions on file (skipping): /etc/machinit_peruser.d/com.adobe.SwitchBoard.monitor.plist
    11-03-11 12:35:54 com.apple.launchd.peruser.501[108] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    11-03-11 12:35:55 kernel disk3: ioctl(_IOWR,'d',132,24) is unsupported.
    11-03-11 12:36:05 diskarbitrationd[12] SystemUIServer [113]:25091 not responding.
    11-03-11 12:36:14 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[101]) Exit timeout elapsed (20 seconds). Killing
    11-03-11 12:36:14 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[101]) Job has overstayed its welcome. Forcing removal.
    11-03-11 12:36:14 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow) Bug: launchdcorelogic.c:1114 (24498):0
    11-03-11 12:38:50 com.apple.launchd.peruser.501[108] (com.apple.Kerberos.renew.plist[200]) Exited with exit code: 1
    11-03-11 12:38:50 com.apple.usbmuxd[43] HandleUSBMuxDictionary client 0x103a00010-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    11-03-11 12:39:26 mds[48] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    11-03-11 12:39:26 mds[48] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    11-03-11 12:39:26 mds[48] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    Any idea?

  • Powerpoint application stopped working on mac pro

    one week ago my microsoft powerpoint application stopped working.
    is it possible to resolve this problem on my own?

    that's an apple error message so you should either:
    1.  contact apple to resolve.
    2.  uninstall photoshop elements (pse), reinstall using a link below and your pse serial number.  before uninstalling make sure you can download the correct version/language and you have your serial number available.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Apple wired keyboard stopped working after Mac Pro SMC Firmware Update 2.0

    After the update, my MacPro will not deetect/accept the keyboard. My old keyboard (White plastic) works, my new (approx 6 months) aluminum wired keyboard don't. Keyboard tested on other Macs - no problem there.
    Anybody know why/how to fix/have a solution?

    SMC Reset and PRAM Reset are the conventional ways to deal with such problems.

  • Adobe photoshop elements 11 stopped working on Mac Pro

    in januari 2014 adobe photoshop elements aangeschaft in te i-tunes store. Altijd naar behoren gewerkt. Nu sinds ongeveer een week kan ik het programma niet meer opstarten. Na het opstarten vraagt hij om aan te melden met mijn Apple id, wanneer ik dit doe geeft hij de foutmelding: uw apparaat of computer kon niet worden geverifieerd. Neem contact op met support voor ondersteuning. Heb ook al contact gehad met i-tunes store, deze laten mij weten dat dit iets is voor Adobe.
    Gaarne reactie!

    Since the translation widget isn't working, mycrazylive says:
    in January 2014 adobe photoshop elements purchased at i-tunes store. Always worked properly. Now since about a week, I can not start the program. After startup, he asks to sign up with my Apple ID, when I do this it gives the error message: Your device or computer could not be verified. Please contact support for assistance. Have already had contact with i-tunes store, this let me know that this is something for Adobe.
    Please comment!

  • Adobe photoshop elements stopped working on Mac Pro

    in January 2014 adobe photoshop elements purchased at i-tunes store. Always worked properly. Now since about a week, I can not start the program. After startup, he asks to sign up with my Apple ID, when I do this it gives the error message: Your device or computer could not be verified. Please contact support for assistance. Have already had contact with i-tunes store, this let me know that this is something for Adobe.
    Please comment!

    that's an apple error message so you should either:
    1.  contact apple to resolve.
    2.  uninstall photoshop elements (pse), reinstall using a link below and your pse serial number.  before uninstalling make sure you can download the correct version/language and you have your serial number available.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

  • My FaceTime has also recently stopped working on both my Mac Book Pro and IPhone 4S

    My FaceTime has recently stopped working. I usually talk to my daughter but hadn't used it for a few weeks. I have tried to connect to my daughter in the last couple of days but without success. It rings and tries to connect but fails both on my Mac Book Pro and iPhone 4S. My daughter is able to connect to her friends but she cannot get through to me or I to her. Can anybody help?

    Yeah, I don't think that's necessarily all the issues here (re: iOS update). I have 7 devices that have stopped functioning within the last week and all of my devices have the latest iOS on them. I came to the forums to see what's available for help, but I'm guessing I'll need a trip to the local Genius Bar.

  • Magic Trackpad - 2 finger scrolling has stopped working in Mac Mail - works in Safari

    Hi,
    I've been happily using a Magic Trackpad for a couple of years but just recently the two finger scrolling has stopped working in Mac Mail. It still works fine in other apps eg Safari so this seems like a very odd problem ie I can't imagine you can configure it to work in one app and not another! Any suggestions?
    Thanks,
    Rob

    Thank you merleau.  I had the very same problem and found your solution perfect. This helped me tremedously.

  • Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it, updated it

    Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it,updated it and reinstalled all my apps with the ‘applications install DVD’ however it still does not work. I have also tried holding the command and option key while pressing iphoto then when the pop up appears i press the checkboxes that have been suggested by other users however nothing happens. Any other suggestions would be great!

    Ok the program itself is likely fine, it's the files it depends on that are not.
    Step #1
    1: Open your Users/Library/Preferences folder (if on Lion you need to use the Go in Finder)
    2: Scroll down until you see a file called
    com.apple.iPhoto.plist
    3: Trash it and reboot, start iPhoto and see if it works.
    Step #2
    1: Go to your Users/Pictures/iPhoto Library and right (or hold option) click on it and "show package contents"
    2: Inside will be a folder with your originals, copy them out.
    3: Move and rename the iPhotoLibrary file outside of the Pictures folder.
    4: Reboot and restart iPhoto, check inside the Pictures folder if iPhotoLibrary was created.
    5: Download ClamXav and run a scan on the Original photo's and your whole machine too while your at it.
    (it's if there is a picture in there from Windows it could contain a corruption caused by malware)
    6: Reimport the originals back into iPhoto.
    See if those two steps resolve your issue, if not I could suspect next a network issue? Like iPhoto is trying to contact the internet and can't or gets hung?
    You can can create another user, use the Shared Drop box to transfer files and log into the other user and see if it's a issue with just your User account, and if so you might just want to transisition over and then one day delete the old user and it's problems.
    Please keep your Flash updated.
    http://flashbuilder.eu/flash-player-version.html
    Read my backup and restore etc., info here
    https://discussions.apple.com/message/16276201#16276201

  • TS1702 My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    We need clarification here.
    Please don't just state version numbers, also state which software.  iTunes 10.7 requires OSX 10.6.8 or higher.  Leopard is OSX 10.5.8.  You have two alternatives right now.  One is to stay with Leopard for a while (ultimately you should upgrade) and install iTunes 10.6.3 which is the last version to work with Leopard.  This should work with iOS6 on an iPhone4.  The other is to call Apple and order OSX 10.6 (Snow Leopard) and upgrade the computer to 10.6.8 which will allow you to run iTunes 10.7.  The caveat is we know nothing about which computer you run and if it even can run any system higher than Leopard.
    Here is iTunes 10.6.3
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    If you want to try upgrading:
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About this Mac" and "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).  If it says something about Intel or Core Duo or Core 2 Duo in the processor you can upgrade to Snow Leopard (assuming you have sufficient RAM/"memory").  If it says PPC or PowerMac, you cannot.
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. 
    It would help when posting issues here if you would state exact error messages you see.  "It's still not working!" while a description of the situation does not speed us to a diagnosis of the underlying issue.

  • How is the Notes app supposed to work?

    I'm experimenting and it seems that a note I create on the iPad in the Notes app gets synched to my Mac only when I sync thru iTunes, yes?
    And for some reason it shows up in a certain mailbox (I have several). Is there some way I can get it to go into the "On My Mac" folder and not go into the InBox at all?
    And the only way I can synch this note to my Iphone is to manually synch the iPhone thru iTunes, as well, yes?
    Is there ANY way to synch Notes in these devices OTA? Mobile Me? Any way at all? I'm already paying for MobileMe, which syncs everything else just fine, I really don't want to have to use some 3rd party app just to keep my notes synched.

    Hi,
    I did checked just now and it works for me i.e. it does stop on both occasion whether I have Submit All enabled or not.
    Can you remove the Quiz Result Slide and add it again from Quiz Preferences--Settings and check if the slide does pause for Continue button.
    Thanks,
    Anjaneai

  • After I upgrade lion to Mavericks, App Store stopped working, any idea how to fix this?

    After I upgraded OS lion to Mavericks, in app store I had some new updates, then after a system update, which require restart, then App Store, stopped working, any one can tell me what should I do to fix this problem?

    Guys just contact apple support team . They will guide you well and your problem will most probably be resolved. I contacted them and following their instructions my mac is working totally fine again. If at all the problem persist the re-install mavericks by following steps
    1). Switch of mac
    2). Hold option/alt key and then switch it on.
    3). Then choose your language and continue.
    4). Now Re-Install OS X .
    5). It will start downloading and installing.
    6). Leave it idle for the required amount of time.
    7). It will restart automatically and your problem will be definitely resolved.
    Note:
    a. If there is any problem of connection follow the same steps and the downloading will start where it stopped.

  • Itunes 10.5 my itouch will not sync program stops working

    upgraded to itunes 10.5 have itouch updated also, now willl not sync itunes stops working.  Now no music on my itouch.  Any help??? thanks

    I have nearly the same problem too!
    But in my case nothing is working, i can´t sync apps, music or anything else. everytime it says "device is not connected".
    i also tried to delete my old backups, made new one. also re-installed itunes. tried to sync with wifi and without, tried to sync in parts and not the hole things, tried to sync manually and nothing is workin
    need help, please.
    os: windows xp prof. (sp3)
    itunes 10.5.3.3
    iphone 4s 64gb
    and not jb.
    thank you and regards, benjamin

Maybe you are looking for

  • ALV REPORT BY USING TOP_OF_PAGE

    HI, firends i  want the code for  the top_of_page procedure in ALV REPORT, SO i can display data on top of my report . REGARDS SHAFEEQ AHMED

  • My iphone 3G is missing the camera after i did an update, how do i get it back

    I just updated my Iphone 3G this past weekend and went to take a picture at a birthday party and couldn't because my camera app is not on my phone anymore, What is the deal? Where did it go and how do I get it back? This just *****

  • Need to install SAP ECC 6.0 & NW-04s Components

    Hi Experts, I am new to SAP. I have to install SAP ECC 6.0 ,NW-04s(PI,BI,MI,.......) , so I need to know whether SAP Software will support the below illustrated Hardware or not. 1. Intel Processor Core-2-Duo 6650   2.66 Ghz 2. Mother Board Intel DG33

  • Package objects and transport request

    Hi Gurus, How to find out the transport request which are generated by an object created? I have a package(ex:xyz) which has got an object (abc).Now i need to find the transport request which are related to this object abc? Please tell me the procdur

  • How do I keep programs from changing my home page

    Everytime Firefox starts, another program keeps changing my home page. How do I stop this from happening?