My notes just vanished?

I was just using the notes app on my phone. I have several notes in there where I put a few numbers I need to remember (such as my student ID that I constantly forget). I've never had a problem with notes and never heard of anyone having an issue. I went to open my notes and suddenly it said I had no notes on my phone. I haven't synced them with my MacBook Pro (which has Mountain Lion Osx version 10.8.2). I know because I attempted to put my notes from my phone onto my computer because I couldn't figure out how to do it. They're not in my gmail in notes (my gmail app has for some reason said it was offline all afternoon even though my 3G service is fine where I am, so I have no idea what the deal is there) or on the notes app on my Macbook. Is there any way to recover them? Or are they lost forever? I literally just checked my twitter and went back to notes, and it was empty, so I know that I didn't accidentally change any settings.

I don't have the accounts button in the notes app. There is just a plus sign, a search bar, and now it says "no notes." I haven't figured out how to used iCloud yet. I have it set to sync, but for some reason, my iCloud is empty. I've tried to get documents from my computer up there, but I've never been able to master it. I was using the notes app, so just the local notes account that comes with the phone, I'm assuming. I honestly have no idea how to use it on iCloud or Gmail. Is it possible for the data to just disappear? The app never even crashed, and I can't imagine why the data would disappear.

Similar Messages

Help! iTunes has completely disappeared off my iPhone 4s, yes the program, not just the app, and all my music has gone! How can I get this back? Thanks!!

Help! iTunes has completely disappeared off my iPhone 4s. Yes the Program, not just the app! All my music has just vanished! How do I get this back!!
(p.s. I do suspect a deletion has occurred courtesy of my 4 year old nephew, some other stuff has gone too, but beats me how he deleted a whole program!!!)

Hi clorowan
I found the following information that may be helpful:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

2 yrs worth of music on my ipod nano 5th gen just vanished while I was trying to add four new tracks.

Most of the music I've put on my ipod nano 5th gen in the last 2 years just vanished while I was trying to add four new tracks. Stuff from before that seems to be still there (I add stuff manually, not sync, and the ipod wasn't full). It was a bit glitchy as soon as I plugged it in to update - threw up a few error messages, decided to verify my ipod a couple of times, After that, once or twice itunes seemed to lose the ipod completely, although as far as the laptop was concerned it was definitely still connected, so i went for the 'safe to remove hardware' option and reconnected...
I'm guessing somewhere in the midst of whatever was going on there, something got confused or corrupted, but I have no way to tell what... Ipod seems to think it is using less of its capacity now, but I don't know whether to believe it or not!
Can I get this stuff back? It's not just stuff I bought from itunes, either - things I put on from cds have gone too. I have all the music either backed up or on cds, but I'm not in the same country as my cds right now - also rebuilding all of my playlists and trying to remember what went where is going to be a pain! Is there a quicker way than just doing it all over again?

Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081

My external 2TB Western Digital external drive just vanished.

My external 2TB Western Digital just vanished as well. [I have read many posts very similar to mine in the MacRumors forums and also Western Digital forums.
I never installed any WD software when I purchased it , or since, but formatted the drive with 2 partitions as usual with Apple Disk Utility.
I have been using it for months and no problems. Then yesterday I tried to access the drive and it gave me the message "The disk you inserted was not readable by this computer" and asked if I wanted to Initilize it.
I then checked with Disk Utility and where I formerly had 2 partitions it showed only one and said it was empty!
No data at all!
I have been using this drive with OS 10.9.2 for a while, it was fine untill everything vanished yesterday.
I then updated to 10.9.3 but the drive is still 'gone'.
So far no fixes posted.
Help me Apple....what have you done?!?!!!
Adam
I have a MacBook Pro.

Apparently WD released a new WD 'Smartware' Version in 2013 to address this problem with Mavericks and WD External drives. I can find no confirmation from any source that this works and indeed many warnings against using any WD software for setting up or fixing their drives when used with Macs and Mavericks. Anyway...this is just for Smartware.
http://wdc.com/wdproducts/wdsmartwareupdate/wdsmartware.asp?id=wdfGeneric&os=mac
I can find no Firmware updates for the issue anywhere.
Have filed a case with WD Support a couple days ago; still waiting for any response.
The MacRumors Forums, Western Digital's forums, and Apple's Support Communities all had threads about lost data after connecting Western Digital external hard drives to computers after updating to Mavericks.
WD is happy to announce the release of WD SmartWare Version 1.3.6 for Mac 10.5-10.9.
Fixed an issue related to reports of some customers, under certain conditions, experiencing data loss when updating to Apple's OS X Mavericks (10.9).
The WD SmartWare update is available for download from Western Digital's website.

Notification Center for fb: When clicking on "show" it just vanishes...

When I receive a notification alert from Facebook via the Notification Center it shows 2 buttons; Close and Show. When I click on Show it just vanishes and does not open the Facebook page. Can anyone explain why this is? When I receive notifications from Mail it does open Mail so I am confused and wonder if there is a problem (bug) with my set up! Any help appreciated.

When I receive a notification alert from Facebook via the Notification Center it shows 2 buttons; Close and Show. When I click on Show it just vanishes and does not open the Facebook page. Can anyone explain why this is? When I receive notifications from Mail it does open Mail so I am confused and wonder if there is a problem (bug) with my set up! Any help appreciated.

My bookmarks just vanished.Now I can't bring them back no matter what I try.

One day I was adjusting my current window open so I could continue with my project.I don't know how but my bookmarks just vanished.I found where they are but I couldn't put them back where they belong.Why and how do I put them back?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.<br />
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

WRT54GL - constantly losing connection (not just the wireless)

I have done searches here before I posted, but, in this rare case, almost TOO much information comes up, and not all of it is the exact issue that I am having, so I wanted to simply post a message and hopefully get a response or at least be directed to the proper response is already answered.
Up until about two weeks ago, I had an older WRT54TG, years old, never had any issues with it. Then it died. It didn't just have issues, the entire thing just died. I didn't even care. I more than got my money's worth out of it. I then got a brand new WRT54GL, had no issues setting up or upgrading to the newest firmware.
However, at LEAST once, sometimes up to four times a day, the connection vanishes. This is not just the wireless connection, but the connection to the computer it is hardwired to. I am forced to load up the router software and click on DHCP Renew to get it working again. To be blunt, this is just not acceptable, and if it cannot be fixed, I will have to buy a different router. I cannot even remember having to do this with the older router except when power went out. Here, though, it just happens.
Today, for example, I turned my laptop on in the morning, while upstairs, had no Internet, had to come downstairs, boot up the other computer, do the DHCP Renew just to use my laptop or any other device, again, including the primary computer that is directly connected to it.
So, that's the issue. Any and all advice would be more appreciated than you know.
Thank you!

As you upgraded the router's firmware,I would suggest you to reset the router and reconfigure it from the scratch... On the setup page of the router,reduce the MTU value to 1350.Under the Wireless tab,Change the Wireless Channel to 11-2.462GHz.Under the Advance Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Now,power cycle the entire network.

Note just disappeared

I had one of my notes just disappear - poof - from my iphone (while I opened it and had no signal...cell or wifi). I opened it - saw the title - clicked it - then a blank note replaced it and I didn't really know what happened - it was that quick. Then I want back to see list of notes and it was gone. It's a very important note - can I retrieve it? This will kill me to lose all those notes on that particular note pad.

i think i did. i'm totally new to the iphone so i'm probably doing something wrong (and not the phone's fault)
hmmm, i just plugged my iphone into my imac to charge/sync it, and saw my current note vanish into the top left hand corner. so if syncing deletes the note - where does it go?
and how can i stop this from happening? surely must be a way...
thanks!

My notes have vanished!

I have just go into my notes and have just noticed all of my notes have vanished! I didn't delete them as I need them! Has anyone else noticed this and how do I get them back?

Good news everybody - 10.8.3 has finally solved the problem!
There were a few things to do after updating to get it to work though:
Go into the Library folder (hold down the option key and select Library from the Go menu in the Finder)
Type com.apple.notes into the search box
Delete everything that it finds
Go to System Preferences and select Mail, Contacts & Calendars
Go through each account, first making sure that the IMAP Path Prefix on the Advanced... button is set to INBOX and then making sure that Notes is ticked in the Use With: box.
And that was it! It only took them 7 months and 3 system patches to fix it!

SWING app just vanishes on win xp

Hi running out of ideas on this one, we have a swing app running under 1.4.2, and on one of our testers machines in India, he is reporting that the app just "vanishes". I am unable to reproduce the problem here on my install and in my IDE environment. It doesn't always happen in the same place or doing the same action in the app. I added a security Manager to monitor for system exits incase a third party lib was calling System.exit. however when looking at the Logs the System exit routine is not called. (it is when I do a normal app shutdown, so that at least is working). Does anyone have any pointers on how I can trap this, or find out more info on what is occurring.
the xp machine has 1 gig of memory and 2.6 ghz processor.
Any pointers gratefully received.

The files are created in the running directory.I have no other files in the running directory, other than the redirected stdout and stderr, files and in there, is nothing that I wouldn't normally expect. One possibility I have thought of is that the JVM isn't actually crashing, that an external process is ending it, similar running an app in a console and hitting ctrl[c] (on windows, to kill the process). I have read about shutdown hooks, and was wondering if these may help. Does a shutdown hook always get called, even if I were to end/kill a process say from (Task manager or process manager) any one have any experience of shutdown hooks? - thanks for responses so far though.

How can i print all the tab pages not just the first page (tab)

how can i print all the tab pages not just the first page (tab)

You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png ‏3 KB

I want to move voice memos from iPhone to PC (not just sync to itunes)

Hi,
I want to move voice memos from my iPhone to Windows desktop. I saw several posts about syncing them to iTunes. Thats not what i want. I want to copy them to my desktop not just sync to iTunes. Unable to copy - paste from iTunes either.

impossible to do anything simple on iTunes, I managed to wipe all my recorded voice memos when I tried to move my files from iphone to desktop, instead they just "sync" I never got the point with sync, why can't you just export files and import files from desktop, simple as that why make it so complicated

Is there a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memos does on iphone?

Does any-one perhaps know whether there's a voice recording app for ipad that shares directly via iMessage (not just email) - like voice memo does on iphone?

You can't do anything in the background of iOS. Apps are still one at a time (with a few exceptions like Music), and suspend when the app is closed. It's also against the App Store guidelines to sell apps that would allow such actions.
Though, maybe you could get your Voice Memos saved to MP3's, which can play in the background of other apps.

I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. How can I do this to ensure all videos and music transfer over and not just purchases?

I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. I originally started using iTunes on my PC so it has everything I have ever purchased or uploaded from my own collection of music.
How can I do this to ensure all videos and music transfer over and not just purchases? Do they do it at the Apple Store or at Best Buy? help!

Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Also, See here if you need to... iTunes to an External Drive
http://support.apple.com/kb/HT1751

Passing A List To The Struct, Not Just A Single Value

I need for my structure to go through a list, not just one
value and I can't see how to get it to work. Say for example the
offer code is 8 and someone has 2 8's that apply...it is only
accepting 1 and the other goes unnoticed. Would someone please help
me figure this out before I bite all of my fingernails off. I'm
attached a .cfm of the page, but here's the code as well I'm
talking about. What am I doing wrong?
<cfelseif currentOffer.saleCodeType_id EQ 8>

<cfquery name="qryApplySpecificItems"
datasource="#REQUEST.db#">
UPDATE shoppingCart_lineItem
SET price = price - (price * #currentOffer.parameter#),
title = title + ' - DISCOUNT PRICE',
expireDate = saleCode.endDate,
salecode_id = saleCode.saleCode_id
FROM shoppingCart_lineItem
INNER JOIN saleCode ON (saleCode.saleCode_id =
#currentOffer.id#)
LEFT JOIN product_viewType ON
(shoppingCart_lineItem.product_id = product_viewType.product_id)
INNER JOIN product ON (shoppingCart_lineItem.product_id =
product.product_id)
LEFT JOIN product_studio ON
(shoppingCart_lineItem.product_id = product_studio.product_id)
LEFT JOIN list_product ON (shoppingCart_lineItem.product_id
= list_product.product_id)
WHERE shoppingCart_lineItem.cart_id = '#cookie.cartid#'
AND ((is_PrimaryOnly != 1 AND product_viewType.viewType_id =
saleCode.viewType_id) OR (is_PrimaryOnly = 1 AND
product.viewType_primary_id = saleCode.viewType_id)
OR saleCode.viewType_id IS NULL)
AND (product_studio.studio_id = saleCode.studio_id OR
saleCode.studio_id IS NULL)
AND (product.productType_id = saleCode.productType_id OR
saleCode.productType_id IS NULL)
AND (list_product.list_id = saleCode.list_id OR
saleCode.list_id IS NULL)
AND shoppingCart_lineItem.expireDate is NULL
AND (shoppingcart_lineItem.formatCode NOT IN ('SD', 'SM',
'SR'))
</cfquery>
<cfquery name="qryCartTotal"
datasource="#REQUEST.db#">
SELECT SUM(ISNULL(MPDPrice,price) * quantity) AS cartTotal
FROM shoppingCart_lineItem
WHERE cart_ID = '#COOKIE.cartID#'
</cfquery>
<cfset totalnotax = 0>
<cfif IsNumeric(qryCartTotal.cartTotal)>
<cfset totalnotax = qryCartTotal.cartTotal>
</cfif>
<cfif currentoffer.list_id NEQ "">
<cfset REQUEST.upsellList = currentoffer.list_id>
</cfif>
<cfset cmd = ArrayAppend(offerslist, currentOffer)>
<cfif currentOffer.salecode EQ usersalecode>
<cfset codevalid = 1>
</cfif>

You can consider to restore an older copy of the places.sqlite file in the Time Machine (if you use this) to recover (inspect) history from that instance of the file.<br />
Make sure to keep a copy of the current version if you do not want to lose newer history.

My notes just vanished?

Similar Messages

Maybe you are looking for