My number is own by another company.

How do I get in touch with a live representative. I bought a skye number which is *edited for privacy*. made a call to test it and found out that it was some Eliminating Company phone number. My question is how can I cancel and get another number. I need this new number as soon as posible. Thank you in advance.
George Richmond
SKype ID:  georgejr5906

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
If the email address is already linked to another iTunes account, and it's not your account, then there may not be anything that iTunes Support can do - they might not be able to contact other users about their accounts. Have you ever have any email receipts to that email account (e.g. do you have any indication that it's being used) ? Have you tried using that address and getting its password reset (http://iforgot.apple.com) and then logging into the account and changing its primary email address so that you can try using it ?

Similar Messages

  • I just got my iphone 3gs unlocked and i inserted another company sim card in it (Mobilink) but it shows no service plus I plugged it into itunes and the number was n\a. What should I do??

    I just got my iPhone unlocked in Pakistan. Now I want to insert another company's sim card in it, which is not supported of course. It is reading the sim card but shows no service. Plus I plugged it into itunes so that i could confirm it. But the phone number is n/a

    Have you loaded the unlock onto your phone yet?
    If yes: connect to iTunes to load the up-to-date carrier settings of your phone.
    If that does not work navigate to settings>general> reset>reset network setting and confirm that.
    If that does not work have your SIM replaced.
    If no: backup your data, then navigate to settings>general> reset> reset contents and settings and confirm that your phone will be reset to factory settings. Then set it up again and load your backup. Now you have loaded the unlock.
    If all of that does not help contact Apple to check if the carrier has really done the unlock. And if you have not doen an official unlock, but a jailbreak there is nothing I can do for you.

  • IOS Development for another company

    Hi,
    Kinda having some trouble determining the "Program" I should sign up for: Developer or Developer Enterprise.
    Basically, I am going to be developing an App for a company but I am not their employee. Not sure how they install the App other than the App Store. Any direction would be extremely helpful.
    Thank you in advance,
    Kris

    nitropan wrote:
    Sounds like the Enterprise Developer Program is my solutions as long as it's not contractually limited to "in-house" and "employees of my company" as they state.
    Well I think it is, Kris, though I don't know if anyone looks very hard at exactly who gets the in-house apps. After rereading your original question it seems like you might be intending to join the Enterprise Program personally or have your company join. Not seeing that at first I may not have given you enough details.
    I think your client (the corporation or whatever entity it is) would need to join the program, not yourself or your company. It can't be a personal membership as the Developer Program offers, and if your own company joined the Enterprise Program, that still wouldn't allow you to distribute apps in another company. Apple requires a Dun & Bradstreet Number and the signature of someone who has the authority to bind the company to a contract. So I imagine you'll need to discuss this with the client to see if they're willing to make that commitment. You'll find all the details if you drill down from the front page I linked to my previous response.
    But if you're concerned the contract limits your participation, that's not the case. "limited to 'in-house' and 'employees of my company'" refers to distribution of the app not development. I'm sure your client (i.e. the Enterprise Program member) is free to obtain the services of anyone they want to develop, integrate and maintain their apps, and I can't imagine their contract with Apple says anything about the developer's relationship or lack of any relationship with the Program member.
    Hope that fills in anything I should've included last time.
    \- Ray

  • Settlement of WBS to the Fixed Asset in another company code

    Hi Friends,
    I have another problem with WBS elements and fixed assets.
    I used WBS elements to create a AUC by AUC settlement in company code A. Then I put a second settlement rule with settlement type "FUL" in WBS element and settle AUC to a depreciable asset in company code A.  Then I transfer the depreciable asset from company code A to company code B. Now I put the current month as the end day of the second settlement rule and add a third settlement rule in WBS element in compnay code A. The third settlement rule will settle to the depreciable asset in company B. When I am adding the third settlement rule, the system gives an error: "Asset XXXX not in company code A" .
    Then I add another WBS element in company code A and put a settlement rule which settle to the depreciable asset in company code B. The system did not issue any error. Everything works fine.
    So it seems the WBS element cannot settle to the asset in the other company code if it created a AUC in its own company code.
    People told me that it worked in their legacy SAP system. So I am wondering whether there is some settings that I did not do, which caused this problem.
    Do you have any idea about this?
    Thanks,
    Ting

    in the requesting company codeon the wbs master data enter the company code for which the AuC and the fixed asset will be created
    in this way you can settle from a project in one company code to an asset in another company code

  • According to our records, this serial number is registered to another Apple ID.

    I bought an iMac from an ARC thrift store that had been donated.  When I try to register the iMac to my AppleID to see if there's any Applecare left I get the message "According to our records, this serial number is registered to another Apple ID." 
    So how does one register/re-register a device that someone else no longer owns?

    You will need to contact Apple by phone and get your issue resolved.

  • Sales using plan from another company code

    Hello Gurus,
        will you please provide some detail about customizing " inter-company sales processing", mainly about how to get plant from another company code?
    thanks very much!

    Hi
    explaining you in brief, the basic requirments for intercompany sales is,
    Both the company codes should belong to the same company
    The material should be existing in both the company codes
    Configuration Settings :
    1. The material should be extended to the Ordering company and while extending the plant and storage location should be maintained same(that of Delivering)
    2. An Internal Customer should be created in the Delivering Company Code. Use the Delivering Company code and ordering sales area.
    3. In the path IMG - Sales and Distribution - Billing - Intercomapny Billing -
        1. Define Order types for Intercompany Billing - where you have to assign the Billing type IV to the sales Order types.
        2. Assign Organisational units by plant - where you have to assign the Delivering plant to the ordering sales area
       3.Define Internal Customer number by Sales Organisation - where you have to assign the Internal Customer number to the ordering sales organisation
    In addition to this you have to define the plant as the Delivering Plant by maintaining the assignment of plant to Sales Organisation and Distribution Channel (of Ordering in enterprise structure)
    Now you can create an order and in that you have to change the plant manually and save.
    Thanks,
    Ravi

  • How to  Export/Import "report for the query" to another company

    Hello,
    I do this:
    1.create query in SQL analizer
    2.copy paste into SBO query generator and save
    3.create report for the query
    Then, How to Export/Import "report for the query" to another company ?
    Thanks for your HELP.

    Look for SAP Note number 600813
    That's the note Adele means, I guess.
    <b>Edit (@13:18)</b>
    The direct link:
    https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
    ---- Replace *SOURCE* with the source database name.
    ---- Replace *DEST* with the destination database name.
    insert into [*DEST*].[dbo].[RDOC]
    select [*SOURCE*].[dbo].[RDOC].*
    from
    [*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
    where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    insert into [*DEST*].[dbo].[RITM]
    select [*SOURCE*].[dbo].[RITM].*
    from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    Hope it helps...
    Grtz, Rowdy

  • Block all USB drives except ones owned by our company

    We am trying to setup a policy to block all USB Drives except the ones
    that are owned by the company
    Under USB Connectivity Control we have the following setup
    USB Devices: ENABLED
    Default Device Access: DISABLED
    Human Interface Devices (HID): Always ENABLE
    Mass Storage Class: DISABLE
    Printing Class: Always ENABLE
    Scanning/Imaging (PTP): DISABLE
    USB Device Access Settings
    Name Access Device Summary
    CompanyUSB1 ENABLE Serial Number=xxxxxxxxxxxx
    up to 30 more...
    BUT all USBs are able to connect, not just the ones we have defined in
    the USB Device Access Settings
    Can anyone let us know what we are doing wrong?

    OES2,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Transfer asset from one company code and to another company code

    Hi Guru
    we have one issue in transfering of asset from one company code to another company code by tocde ABT1N as we get the error transaction type cannot be used for activity retmet from interco.transfer w/o rev to affil.co message no aapo176
    any appropriate method to do transfer and what is the settings we should take care for this
    kind regards
    sunitha
    Edited by: sunitha reddy on Sep 1, 2010 2:22 PM

    Hi Sunitha,
    You should also check the following customizing settings in case of AAPO176 in ABT1N:
    It could be that your transaction type that is mentioned in your error code AAPO176 cannot be used for 'Acquisition from intercompany transfer'.
    In this case check the default transaction types your customizing in Asset Accounting - Transactions - Specify Default Transaction Types.        
    Check if the same default transaction type for 'Acquisition from INTERcompany transfer' is also used for 'Acquisition from INTRAcompany transfer'.
    If not, then this is possibly the reason for the error AAPO176.       
    The transaction types for 'Acquisition from intercompany transfer' AND 'Acquisition from intracompany transfer' should be same as the standard transaction type 158 (please also review SAP note 196012). Both transaction types must be customized the same if you use your own customized transaction types...if one is different than the other, that would also be a reason for AAPO176 to be triggered.                                                                               
    I hope this information helps in addition.
    Kind regards,
    Brigitte

  • Need to transfer more than 150 employees from one company code to another company code

    Dear Sir/Madam,
    I am new in SAP HCM . We need to transfer more than 150 employees from one company code to another company code due to some business requirement. Please suggest the process of transfer from one company code to another company code considering the other element like gratuity , leave entitlement, Bonus , Exgratia   etc.
    Your quick response will be highly appreciated.
    Thanks & regards,
    Babuna Ray
    Mob:- 9007295305
    [email protected]

    Dear,
    do not transfer employee from one company code to another issues are as under.
    1. Employees Form 16 you will get wrong value as per I Tax law because of company is having different PAN & TAN.
    2. Form 24 Q annual return data will not get properly/easily from SAP because of form 24 Q will run on Payroll area base/ company code base
    3. PF number is different for these 2 company codes then you are unable to submit annual return.
    4. If employee will get hike after the transfer case then system will post expenses period wise means if employee is having 2 different cost center related 2 different company codes posting will done as per this scenario is it accepted to Account Depatment? it is reflected in FICO through KSBB how can they manage expenditure which is related to previous month?
    Like this many points are there you have to study it and then suggest to your client.
    Regards
    Subhedar
    9158881202

  • Ur customer is another company code

    Hello Gurus,
    Please tell me how to create an invoice to see VPRS, where our customer is another company codes.

    Hi Friend,
    Here you can see the entire Procedure:
    1. Call up the transaction as follows:
        Transaction Code: VF04
        Menu Path: Logistics &#61614; Sales and Distribution &#61614; Billing &#61614; Billing Document &#61614;    Process Billing Due List
    2. Enter the following data:
              a.     Billing date from
              b.     Billing date to
              c.     Sales organization
              d.     Delivery-related (in the Documents to be selected screen area)
    3. Choose  DisplayBillList.
    The system proposes all the deliveries due on the current date for the selected sales organization.
    Note that there could be more deliveries (from previous processes) ready for billing than you created in this process. If this is the case, simply deselect the deliveries that do not belong to your current IDES process.
    4. On the Process Billing Due List screen, choose .
    The system displays your group number.
    5. Place the cursor on the line with the group number and then choose Documents.
    You see the sales document created for your group.
    6. Note the billing document number in the SD doc. column.
    7. Position your cursor on the line containing your sales document, then choose  Display document.
    8. Select your position.
    9. Choose Go to &#61614; Header &#61614; Header.
    In the accounting data you see that the invoice is assigned to the company code 2200 (IDES France).
    10. Choose .
    11. On the Invoice ... (F2) Display: Overview of Billing Items screen, mark the item and choose  (in the lower area of the screen).
    12. On the Invoice... (F2) Display: Item Data screen, mark the condition PI01 and choose .
    You reach the Invoice ... (F2) display: Item Data screen.
    Condition PI01 is marked as statistic in the invoice for the end customer.
    13. Choose .
    14. On the Invoice... (F2) Display: Item Data screen, choose  Analysis.
    15. On the Condition determination analysis screen, scroll down until you can display the condition type VPRS Cost appears.
    16. Double click on the VPRS.
    The condition Cost (VPRS) is part of the pricing procedure. It has statistic character and shows the goods issue value in the invoice. In this case goods issue is posted in a different company code to that of the billing document, so the condition is ignored. The cost that is transferred to the Sales Information System and to Profitability Analysis is the condition value for the internal price, rather than your value.

  • My serial number is registered to another Apple ID

    my serial number is registered to another Apple ID, my iphone is new i tried to register my iphone serial number to my id but i got this massege....(According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID?)

    Hi MOIA323,
    Registration of your iPhone is not actually necessary since the service and support is actually linked to the serial number of the iPhone, not to you. See this article -
    Do I need to register my Apple product?
    http://support.apple.com/kb/HT5803
    If you feel you need to do so, however, you should contact Apple for assistance. Use the methods shown on this page -
    Contact Apple for support and service
    http://support.apple.com/kb/HE57
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Can I use my jetpack as a modem for another company?

    I have internet through another company. Can I use the Jetpack as a modem for the other company? I don't want to have to buy any other equipment!!

    No, it is a Verizon-only device.  And, most likely, the other company wouldn't allow it as it would be incompatible with their services.

  • Transfer Customer Master records from one company code to another company.

    hi ,
        working on a rollout project ,
    needed to transfer Customer Master records from one company code to another company code.
    is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
    thanks in advance.
    rahul
    Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AM

    Hi,
    I think you should ask this question in functional consultant forum.
    Thanks,

  • The serial number is registered to another person!

    Hello.
    Please tell me what should I do?
    I bought the phone in the store. I use it for almost a year. I wanted to make it to the list of their devices, but the identifier writes that the serial number is registered to another person!
    How to fix it?

    What store did you buy it in? A carrier or Apple or another third party store? I ask because many times some stores sell iPhones as though they are new but referbished or even used...meaning it would have been originally registered to the first buyer... and thus the warranty will also not be full or even expired!

Maybe you are looking for