My number shows "Unknown Number" where it should show my number.

I have searched for a Help topic on this and can't find anything besides in the phone app, to swipe down from the top. I have gone through my settings multiple times and can't find anything to change except for the "show my number" setting tickbox.
Has anyone else had this issue and have you found a way to correct it?
Thanks for your time!
Solved!
Go to Solution.

Security and privacy > sim card >edit phone number
Proudful & loyal Blackberry supporter ..
throwing mud at others makes you happy now but in future you might end up in sinking in mud lake.. wake up b4 it happens. Be secure
10.3.0.296

Similar Messages

  • Lms reporting success status=pass/fail, where it should give unknown while running on saba 5.3

    I am trying to run my content on SABA 5.3 , After exiting the content the lms displays success status as Pass or Fail where it should show Unknown. My content does not contain any quiz, so on which basis lms is calculating the success status.

    Yes I know you said your content had no quiz, but please try to remember that we answer hundreds of these enquiries and it's not uncommon for people to tell us one thing when their settings say another.  So I have the habit of asking to see the actual screenshot.
    Each LMS interprets the SCORM standard a little differently.  In SCORM 2004 a course module can have both a status for Complete or Incomplete, as well as a separate status for Pass or Fail. (Under SCORM 1.2 the overall status was tracked by a single element - cmi.core.lesson_status - allowing for only a single status value that would boil down to Complete vs Incomplete or Pass vs Fail values.
    Under SCORM 2004 there are two separate elements tracking completion and success.
    The SCORM 2004 element cmi.completion_status is designed to indicate whether the learner has completed the SCO and can take the following status values:
    completed,
    incomplete,
    not attempted,
    unknown
    Your Pass/Fail status in SCORM 2004 falls under the element called cmi.success_status. This one indicates whether the learner has mastered the objective and can take the following values:
    passed,
    failed,
    unknown
    So while it is possible for a value of "unknown" to be set for either cmi.completion_status or cmi.success_status, I don't think this would be very commonly done for a Captivate module that actually has interaction data being sent to the LMS.  If the user is interacting with the content at all it would seem more likely that you'd be getting a 'completed' or 'incomplete' status value in the completion element and a 'pass' or 'fail' value in the success_status element.
    The bit I don't understand is why are you particularly keen to see a value of 'unknown' showing up here?
    Check this page for information about getting SABA to work with Captivate: http://www.infosemantics.com.au/adobe-captivate-learning-managment-system-lms-guide/saba
    Perhaps one of the threads it links to will provide more help for you.

  • HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

  • I can't upgrade my iphone4 from iOS5.01 to iOS5.1, tried many times, always showed "unknown error 1602", what should I do?

    I can't upgrade my iphone4 from iOS5.01 to iOS5.1, tried many times, always showed "unknown error 1602", what should I do?

    Error 1600, 1601, 1602: Try the following steps to resolve this error: 
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. 
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • My phone shows extended where it should show Verizon

    My phone started showing extended where Verizon should be I have not left the county where my phone is registered. I have restored my phone and its network settings. I went to Verizon and they actually sent me a warranty phone and it still says extended. I know its not a big deal but it bugs me and if it cant be fixed I just want to know what is causing the issue. It just started a couple weeks ago.

        I'm sorry to learn that your phone continues to display an extended network, mitchellpalles. I would like to review your account to ensure you are provisioned correctly. I have sent you a direct message here. Please reply to my message for further assistance.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • List view shows black spaces where letters should be

    G5, dual 2.5GHrz, 10.3.9
    Just recently when I'm in list view, spaces appear where letters should be. In Icon and Column view everything appears correctly. I have shut down and restarted and corrected permissions. None of that seems to help. Any ideas what might be causing this?
    Thanks,
    Tom

    I found a solution. I moved the preference file named "com.apple.desktop.plist" from the /Users/HomeFolder/Library/Preferences to the desktop and restarted.

  • Green noise is being displayed where black should be being displayed

    OK, I am really worried that my Macbook Pro is screwed up bad. I've been playing World of Warcraft fine for weeks. Been watching my temps, been a little high but not anything dangerous. However I've recently been noticing that when I play WoW for over 2 hrs or so and exit, my screen glitches and what can best be described as green static is displayed where black should be. Now I've tried reseting the NVRAM and leaving it alone for a few hrs and it went away. Now it popped up again, did the same thing that fixed it before, but now it won't go away. Did my Mac overheat and now the graphics are messed up?

    Are you still under warranty? If so, it would be prudent to report this to Apple and possibly get a case number. It sounds like there could be a hardware problem with the graphics chip, even if nothing showed up on the AHT. Did you run the AHT at a time that you were getting the green noise?
    Have you tried an external display? If you get the some problem on it, that would indicate a graphics chip problem. If you don't, there could be some sort of problem with your built in display.
    Good luck!

  • HT201210 hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

    hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

    Was the complete wording of the error message? Usually an error number or other information is also provided

  • Where i should find the serial key for photoshop cc

    where i should find the serial key for photoshop cc

    There's no serial number in CC - you sign in with your account username and password.

  • In Facebook, the picture appears below the page, not where it should. Why?

    In Facebook, when clicking on a picture that lives in an album, a new window appears with the picture in the frame below where it should be, not next to the comments. You have to scroll down an entire page to see the picture. This only happens in Firefox, not Chrome.

    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • On final Cut express I try to import a video but it says error: unknown file. What should I do?, On final Cut express I try to import a video but it says error: unknown file. What should I do?

    I try to import a video but it says error: unknown file. What should I do?

    Where are you importing from, a camera, a file?????
    Please provide some type of specific info regards the import.
    FYI: FCE works with only DV, HDV and AVCHD codecs.
    Al

  • Can't find movie I downloaded from ITunes. Any ideas on where I should look.

    I can't find the movie I downloaded from ITunes. It hasn't showed up in downloads. Any ideas on where I should look?

    In the Videos App. That is where downloaded movies appear and that is where you play them - not in iTunes.

  • IN e-mail cannot attach docs. Get "missing plug-in" where doc should attach. Any ideas how to fix?

    In e-mail cannot attach documents. Getting "missing-plug-in" where doc should attach. Any ideas how to get docs to attach and show on incoming messages?

    Back up all data. Boot from your installation disc and reinstall OS X, then run Software Update.

  • After I updated, pictures has gotten a yellow tint where it should be white.

    after I updated, pictures has gotten a yellow tint where it should be white. I checked the same websites in safari, and those sites shows perfect color.
    What can I do to fix this issue?
    Being a photographer, this is quite a big problem

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • Screen displays red where black should be

    I have been having display issues for a few months and can not get it fixed.  Where the screen should be displaying black the color red is being displayed. My system info is:
    I have a G61 laptop with windows 7 64 bit system
    ATI Mobility Radeon 4200 series
    Driver 8.970.100.1100(201304290
    When I connect the laptop to a external monitor dont have this issue.
    I downloaded the Radeon file to detect the proper graphics drive and it confirmed that the latest driver is installed.
    Can anyone please suggest a way to fix this issue please?
    Thank you
    Jere

    Hi @JereJK1960
    Welcome to the HP Support Forums! I saw your post regarding the problem with the red where it should be black. Since, this doesn't show up on an external monitor we know it is not a problem with your video card or graphics driver as it would show up on the external monitor. This is a hardware issue with the display screen or the connectors to the display. Give us a call regarding repair options. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I get bullets where links should be - how do i fix it?

    on certain but not all websites, i get bullets where links should be. when i hold my cursor over it and right click, the link appears in red along with the right click dialog box. whats going on and how do i fix it? seems to have happened since i updated the latest ff.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for