My Number : Unknown Number

I am using Blackberry Curve 9330 3g (CDMA) handset. When I press the green button then above the dial pad it show my number unknown number. Is there anyway to resolve this issue.
I searched all over but I can't find support regarding this issue. There is only support for GSM handsets. I contact to service centre also but they also are unable to resolve my problem. Is there anyway to resolve this issue?
Thanks in advance.

Is that big issue? Does your device work fine?
Any who here some info that could help you --> Sim card number, system settings - security and privacy - Sim card - edit phone number (put your number in)
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

How do i dial international numbers... I get unknown number

I got a tmobile 8220 that I unlocked so that I can use in Chile vacation. I try to dial a number and it goes back to the placed calls menu and it says My number Unknown number. I am not sure if that is the real error or it just doesn´t know it´s own number. One time the phone tried to add my US area code to the number. So I was wondering if this is a phoen issue or if it´s a cell phone company issue. The number is 8 digits. x-xxx-xxxx (first x is the region code)

Good to know that you've resolved the issue by yourself. Please resolve the threat by accepting the solution button.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Showing dynamic and unknown number of images in SSRS report

I am using SSRS 2008. I need to display an unknown number of unspecified images on the report.
Basically I have a webpage, where the user selects a specific ID (ex. 24) from a dropdown and then click "View Report".
The report should then display any images, associated with that ID. The only thing I know about the images, is the path to where the images are stored. The path is kept in a database, so I should be able to retrieve the path ok.
But then how do i get the report to display the images, when I do not know the name or number of images?
Please help.

Hi dukie4lif,
According to your description, you have a report to display images selected by users. Now your issue is, the users select a specific ID to get images, but you only have the path of images stored in your database. Is my understanding correct?
For your requirement, if the users want to get images by selecting a specific ID, this ID must be stored in database and associated with the path of those images. Otherwise the database can never query any records with this ID if it doesn’t have any ID stored.
Now we need to go to your database, create one more table or add one more column in the table which have your path stored to store those IDs, and let them associated with those path. Use a parameter in this report for users selecting IDs. Then your goal will
be achieved.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

Add Listener to Unknown Number of JMenuItems

How can I add an ActionListener to each JMenuItem by cycling through an unknown number of menu items?
I have a program that prompts the user for a database, then creates a JMenu of table names based on whatever database the user selects.
This means that I don't know the table names or number of tables that will be added to the JMenu.
I need to add an ActionListener to EACH JMenuItem. The problem is that I am only able to select one table from the menu. Subsequent menu clicks (on different table names) have no affect on the output.
Here is an excerpt of my code:
ResultSet rs = md.getTables(null, null, null, types);
while (rs.next()) {
tables.add(rs.getString("table_name"));
for (Iterator i = tables.iterator(); i.hasNext(); )
String table = (String) i.next();
JMenuItem mi = new JMenuItem(table);
j1.add(mi);
mi.addActionListener(this);
[END CODE]
Thanks for any help you can give!

I got it. It turns out that I WAS setting the listeners correctly. My additonal output was "hidden" in the window. I found it by pure luck when I expanded the window size.
I added a line to remove all components from the JPanel before adding a new one and this "refresh" worked.
Thanks fot the help anyway! It is greatly appreciated.

SAP customer number unknown for installation number

Hi There,
We're facing some problems after a reconfiguration of some things in Solution Manager. We have SAP EHP 1 for SAP Solution Manager 7.0. Have made two days ago the installation of the latest SP, but not the kernel yet.
The problem is in the job SEND_SYSTEM_RELATIONSHIP_TO_SUPP. The error is:
08.01.2010 10:43:24 Job started                                                                                00           516          S
08.01.2010 10:43:24 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SOLMAN_BTC)      00           550          S
08.01.2010 10:43:24 SOL determined as monitoring Solution Manager system                                      AI_SC_EN        075          S
08.01.2010 10:43:24 SAP customer number unknown for installation number 00XXXXXXXX               AI_SC_EN        097          E
08.01.2010 10:43:24 Job cancelled after system exception ERROR_MESSAGE                                           00           564          A
The info about the system:
solman:soladm 21> disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   HP-UX B.11.23 U ia64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Feb 24 2009 21:53:01
update level                  0
patch number                  32
source id                     0.032
supported environment
database (SAP, table SVERS)   700
                              701
operating system
HP-UX B.11
Thanks,
Joao

Hi João Cesar,
I´m faccing with the same error... I installed the solution manager Ehp1 and it have SPS20 applied which correspond to ST 400 level 20 (SAPKITL430).
When I am in transaction SMSY in section Systems and I press the button "READ SYSTEM NUMBER" is shown an error message that says "SAP customer number unknown for installation" the details of help says:
Diagnosis
Installation number &V1& that is assigned to some system(s) in transaction SMSY is not assigned to an SAP customer number in table AIINSTALLATIONS.
Procedure
Please check the log of background job REFRESH_ADMIN_DATA_FROM_SUPPORT for errors.
So, when I entry in that job log I found this error:
No customer numbers maintained in view V_AISAPCUSTNOS   | AI_SC_EN   | 106
Then I went in table/view V_AISAPCUSTNOS and inside does not contain any data!!!
All the notes I found were related to lower versions and so I could not implemented the snotes corrections!! Any notes for my release that are related with this problem?
Joao Cesar what you did for solve this problem??? You didn´t mentioned!! You only mentioned that you implemented some notes.. but which ones?!!?

Uploading a text file with unknown number of texts

Hi ,
i have a flat file with around 10,000 record's.
each material number followed by different lengths & unknown number of text's separated by delimiter '$',
that need to be saved using save_text function module.
the file is as follows,
record 1 :     material1$text1$text2$text3
record 2 :     material2$text1$text2$text3$text4$text5$text6$.....
record 3 :     material3$text1$text2$text3$text4$text5
record 4:      material3$text1
- - - - - - - - - - - - so on ....
i created the following structure , to split and save each text separated by '$' , to save in TLINE of save_text function module.
types : begin of ty_file,
              matnr type mara-matnr,
              text1 type string,
              text2 type string,
              text3 type string,
              text4 type string,
              text20 type string,
           end of ty_file.
i have uploaded the file and saved in table it_file type ty_file.
loop it_file into wa_file.
   split wa_file at '$' in to matnr text1 text2 text3 text4 ....... so on.
endloop.
please, suggest me an alternate way to reduce the code, instead of creating a structure like above, so that each splitted text
stores in a single variable and is passed to TLINE of corresponding material, in save_text function module
thanks
viki

Hi,
The flat file contains , material No. followed by it's text , each text sepearted by '$' symbol.
For each material i have to get all lines of text, and passed to tables paramter of save_text.
The Number of text' for each material is varying.
Please kindly suggest me , how many variables i need to create to hold each splitted text and store it in Tline
I wrote the below program assuming that the material number has maximum of 20 texts, it's working fine. But, what if the number of texts exceeds 20.
file :
4907507$ Druckrolle$ Durchmesser: 218 mm$ Länge: 750 mm$ Rollenwerkstoff: 1.4301/1.4541$ Oberfläche: gummiert$ Stärke Gummierung: 10 mm$ Näscher    E 71224$$$$$$$$$$$$$$
1149598$ Tragrolle$ mit Stützringen$ Norm: ähnlich DIN 22112$ Durchmesser: 89 mm$ Mantellänge: 800 mm$ Form der Achsenden: A2$ Achsdurchmesser: 25 mm$ Achsanflachung: SW 18$ Einlegelänge: 808 mm$ Achslänge: 834 mm$ Lagerbezeichnung: 6305$ Anzahl Stützringe Form A: 6$ Anzahl Stützringe Form B: 4$ Anordnung links: 4$ Anordnung mittig: 6$ Anordnung rechts: 4$ Qualität Stützringe: N$ Durchmesser Stützringe: 159 mm$ Anzahl Zwischenhülsen: 7$ Anzahl Schlussscheiben: 2$ Erbö   3111.800.05.68
file upload
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = gd_file
      FILETYPE            = 'ASC'
     HAS_FIELD_SEPARATOR = 'X'
     HAS_FIELD_SEPARATOR = '$'
    TABLES
      DATA_TAB            = It_data.
loop at it_data into wa_data.
    split wa_data-line at seperator into matnr_txt text1 text2 text3 text4 text5
                                               text6 text7 text8 text9 text10 text11
                                               text11 text12 text13 text14 text15
                                               text16 text17 text18 text19 text20.
    move matnr_txt to wa_material-matnr.
    move text1 to wa_material-text1.
    move text2 to wa_material-text2.
    move text20 to wa_material-text20.
    append wa_material to it_material.
    clear wa_material.
endloop.
loop at it_material into wa_material.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text1.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text2.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text20.
    APPEND WA_LINE TO IT_LINE.
    G_THEAD-TDNAME   = wa_material-matnr. " material number
    G_THEAD-TDID     = pa_id.                           " 'GRUN',
    G_THEAD-TDSPRAS = pa_langu.                " EN
    G_THEAD-TDOBJECT = pa_obj.                   " MATERIAL
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                           = SY-MANDT
        HEADER                        = G_THEAD
        SAVEMODE_DIRECT     = 'X'
      TABLES
        LINES           = IT_LINE
      clear : wa_line, g_matnr.
      refresh it_line.
endloop.
Edited by: jvsvijay on Jul 28, 2011 12:51 PM
Edited by: jvsvijay on Jul 28, 2011 12:53 PM
Edited by: jvsvijay on Jul 28, 2011 12:55 PM

Calls from cucm to CME not working-unknown number

hi all
we have cucm 9.1 and gateway 2911 on the side A and on the side B we have uc540 , we have configured tunnels between 2911 and uc540, calls from cucm SideA to uc540 Side B is ok and working fine. now we have one 9951 phone which gets ip from uc540 (side B) and tftp is our cucm IP.9951 phone is registered in cucm and calls from cucm to that 9951 phones are working fine. now problem is call is one sided between uc 540 local extension and ip phone 9951.
9951 which is registered on cucm can call uc 540 user but spa 504 phone which is registered on uc540 cant call to cisco 9951 phone gets error "unknown number"
i am attaching debug voice ccapi inout with this
kidnly help me to solve the issue ASAP

here is show voice register all.i am surprised to see dial peer 20002 but there is no dial peer like that i dont know where its getting this dial peer 20002.extension 2002 is registered with my call manager.
Router#sh voice register all
VOICE REGISTER GLOBAL
=====================
CONFIG [Version=8.6]
========================
Version 8.6
Mode is srst
Max-pool is 0
Max-dn is 0
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Forced Authorization Code Refer is enabled
timeout interdigit 0
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Attempts to register
after last unregister : 0
Last register request time :
Last unregister request time :
Register success time :
Unregister success time :
VOICE REGISTER DN
=================
VOICE REGISTER POOL
===================
Router#

Smsy "Read System Number" customer number unknown for installation

Hi gurus,
I 'm configuring SMSY and following the steps outlined in the IMG in the basic settings and trying to configure RFC connections to/from satellite systems. In SMSY, I have 2 systems configured SMA and BIF.
tcode SMSY-> Systems -> SAP ERP -> SMA , Tab "System Data in SAP Support Portal".
Click "Read System Number" returns error SAP customer number unknown for installation number 0020179718. <-Why?
Click "Installation Data" shows data from SMP with correct installation number and correct customer number 706822.
      The S-user listed under "Contact Persons" is not mine, not the correct one. <- Why? How to fix?
      The system number from SMP matches value in System Number field.
Click "System Data" shows data from SMP also shows correct data.
Why unable to "Read System Number" when the correct system number is read via "Installation Data" and "System Data"?
tcode SMSY->Systems->SAP ECC->BIF, Tab "System Data in SAP Support Portal".
Click "Read System Number" returns error "SAP customer number unknown for installation number 0020472810". <- Why?
Click "Installation Data" shows data from SMP with correct installation number and correct customer number 706822.
      The S-user listed under "Contact Persons" is correct one.
      The system number from SMP matches value in System Number field.
Click "System Data" shows data from SMP also shows correct data.
Why unable to read system number?
When I login to SMP with same S-user, under System Data Maintenance, the same data is displayed as in "Installation Data" and "System Data" links.

I don't know what happened. I came into work today and tested the "Read System Number" and it worked. I read thru the 2 notes you mentioned, just read now. The first notes I had already followed before opening this thread. The 2nd notes also talked about turning off BAdI implementation AI_SDK_SP_RFC_RP, of which I did a couple of days ago before opening this thread. I had turned turned off BAdI and simplified the AISUSER table and removed the customer number field, in order to get back to the "single-user number" basic setup in the IMG.
I had found the problem with the wrong contact info on the SMA system. It was wrong in the SMP system maintenance under installation data.
Thanks for your help.
-Don.

I have put in a new sim and have no carrier available,no network,number unknown. but i know the sim works?

Can you help please.. I have just put in a new sim from o2 the sim works in my other phone but not in my iphone 4, o2 tell me that it is the phone. I have no carrier available come up along with, no network, and number unknown. I cannot move my sim pin lide to try and unblock the phone either...very frustrating!

Where was the phone bought? Is it SIM unlocked? If not, then the phone will only work with a SIM the carrier is locked to.

Unknown Number Issue?

Hello on previous blackberry's I have relied on pressing the green phone to find my number. It now says Number Unknown next to My Number:
It is over a week old and the phone is all completely registered.
ANy ideas how I can alter this to addmy number or a specific update?
Thanks
Twitter: @Jaker2k
Solved!
Go to Solution.

Sorry It errored when I explained how to do it. Couldnt have done it without your help.
All pretty similar but with new OS I did the following:
Options > Device > Advanced System Settings >Sim Card > Then pressed the options button and Edit Sim Phone Number.
Thanks Again
Twitter - @Jaker2k

IMEI number unknown and in recovery mode, after putting sim card back in ?

Got my phone back today from the phone shop as the charger block needed replacing, as it wouldn't charge as it had shorted out.
Phone was working fine when got it back for good few hours without the sim in it, then when I put my sim in it went all AWOL and went into restore mode with message (IMEI number unknown) & (ICCID unknow).
The phone was on a contract with o2 and then after it finshed, was unlocked to any network by them for a pay as you go sim phone, which it has been for the last 18 month's.
I've read I may have to restore it but as there's many photo's, videos on there, they would get wiped off completely. It's running IOS 4. summit as never upadated due to not having enough room on my hard drive to ever put all the content on it for to do so, so I kept it the same and not backed anything up. Which I should of done but never had enough room as the hard drive pretty smal on the laptop, and the stuff on there thats important to delete to make space.
So if anyone knows what to do or can help that be great thanks cheer.

Once in recovery mode, all data is lost, there is nothing to recover.
The missing IMEI number suggests a serious hardware failure.
Buy a new iPhone.
Apple will not touch the device since it's been opened by someone other than Apple.

HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

I found this in the iCloud Keychain FAQs:
How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
- Your iCloud Security Code
- The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
- If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

Unknown number in profile

I have a contact in Skype account where I see an unknown number in his account only when viewed from my account. I synced my Skype account in Windows Phone so I get two numbers for this contact. We logged in his Skype account profile and there is only 1 number specified. I am not sure where is that another number coming from. Below are the images attached of that contact (skype account, windows phone account).
This is really wierd. Can someone have any suggestions for this issue?

Skype for Windows Phone currently only shows the primary mobile number from the Skype profile of your contact. Other Skype clients support saving additional numbers for contacts of yours which seem to be the case here. You can edit/remove this number e.g. by using Skype for Windows desktop or Skype for Mac
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Profiles - Advanced - Normal - Phone (Unknown Number) ??

My BB8820 shows the following items in the menu under Profiles - Advanced for the "Normal" profile:
Browser
Calendar
Level 1 Messages
Messages(Desktop)
Messenger - Alert
Messanger - New Message
MMS
Phone (Unknown Number)
Phone (Unknown Number)
SMS
Tasks
Why does "Phone (Unknown Number)" appear twice?
Both items access the same settings; if I click one of the two and change something, the same change is seen when I click on the other one.
Is an "Unknown Number" one with caller ID suppressed, or just one that doesn't appear in my contacts?
If these settings are only applied in the case of an "Unknown Number", how can I determine what happens in the case of a known number?

Hi and welcome to the forums!
Here is the user guide for the 8820:
http://na.blackberry.com/eng/deliverables/1224/userguide_bb8820_wifi.pdf
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Reading unknown number of bytes !

Hi all !
I am trying to read unknown number of bytes from the socket.Meanwhile I need to process the bytes depending on the message type in the header.I get messages like this header,body,header,body header,body header,body.....the message type is specified in the header.Each message type has different body size.So depending on that I have to read the next few bytes from the socket....say 300 or 600 depending the on the message type in the header.I get the bytes continioulsy like this.Since I cannot read byte by byte due performance reason is there any other way to do that.....any help will appreciated
sash

A simple workaround is to use a java.io.PushbackInputStream
Read enough bytes to get the header, parse the header bytes, and push the remainder back into the stream to be read as the body.

My Number : Unknown Number

Similar Messages

Maybe you are looking for